Glossary · File formats

STEP file (ISO 10303)

In short

STEP (.stp, .step) is a neutral exchange format for product data defined in the ISO 10303 series. Most mainstream CAD systems read and write it (usually as AP203, AP214 or AP242), which makes it the usual way to pass 3D parts between programs [1].

What a STEP file contains

The file structure is defined in ISO 10303-21: a text file of records whose content follows a data model written in the EXPRESS language [1]. Which content is transferred is governed by the series' application protocols. In practice:

  • Exact geometry: surfaces and solids as mathematical descriptions, not triangles.
  • Assembly structure: parts and sub-assemblies with names, if the CAD system writes them.
  • Colours: often one colour per part or face, no photorealistic materials.
  • Not included: as a rule, the parametric design history of the source system.

STEP and IGES

STEP succeeded older exchange formats. NIST describes IGES as the precursor that laid the technical groundwork for the international STEP effort [2]. If you have the choice, send STEP.

Can a browser show STEP directly?

Not without a detour. Graphics cards draw triangles; STEP holds surfaces. For the browser the surfaces must first be triangulated (tessellation); geometry kernels such as Open CASCADE do this with an adjustable deviation [3]. For a public product page a prepared GLB is almost always better: smaller, with materials and without confidential internal parts.

In short: STEP for the geometry, GLB for the browser. The two are not competitors but two stages of the same pipeline.

What to send

Export the whole assembly with its structure intact, ideally together with your system's native export. Mark which parts must not be visible on the web. The guide CAD to web 3D walks through the full route from STEP to GLB.

Related terms

  • CAD data

    CAD data are the engineering models of a product created in computer-aided design software. They describe parts with exact surfaces and dimensions for development and production, not for display in a browser.

  • IGES

    IGES (.igs) is an older neutral format for exchanging CAD data between systems, developed from 1979 and adopted as ANSI Y14.26M-1981. NIST describes it as the precursor of STEP. Where possible, STEP is the better choice.

  • Tessellation

    Tessellation is the splitting of exact CAD surfaces into a mesh of triangles. It is the first step in showing an engineering model in the browser, because real-time graphics draws surfaces as triangles.

  • glTF

    glTF (GL Transmission Format) is a royalty-free Khronos Group specification for the efficient transmission and loading of 3D scenes and models. In 2022 glTF 2.0 became the international standard ISO/IEC 12113:2022.

More in our guides

Sources

  1. Library of Congress: STEP-file, ISO 10303-21 (format description)
  2. NIST: Initial Graphics Exchange Specification (IGES)
  3. Open CASCADE Technology: Mesh (BRepMesh) User Guide

← All terms in the glossary