Industries & use cases

3D viewer for beverage cans: show flavour designs and multipacks before print

How beverage brands, can makers and agencies use a 3D can viewer: flavour designs, matt or gloss varnish, condensation and multipacks before print.

Short answer: a 3D viewer for beverage cans puts flavour designs on the real can shape, with matt or gloss varnish, as a single can or in a multipack. Beverage brands use it to agree a flavour range before print and to present it to retail buyers; can makers, can printers and packaging agencies use it to show designs on the shape rather than as a flat wrap. It is a viewer with variants, not an ordering system.

This guide is for brand and product managers at drinks companies, for sales teams at can makers and can printers, and for agencies that design beverage packaging.

Beverage can 330 ml – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

Why is the flat wrap not enough?

A can design is created flat, as the wrap of the can body. On the can it sits on a cylinder: motifs run around the curve, the back with the ingredients is never visible at the same time as the front, and a metallic substrate changes the colours. Three questions are hard to answer from the flat file:

  • How does the flavour range look side by side, on the shelf or in a multipack?
  • How does matt or gloss varnish change the effect?
  • How does the can look cold, with condensation, as it is often shown in advertising?

A 3D viewer shows this on the right shape. It cannot replace samples or press proofs, but it moves more decisions to the stage before them.

Who uses a can viewer, and for what?

UserOccasionWhat the viewer shows
Beverage brandNew flavour, relaunch, rangeEvery flavour design on the same can, switchable
Brand sales team with retailListing meeting, presentationSingle can, 4-pack and 6-pack, free to rotate
Can maker or can printerQuote to a brandThe design on the can shape, varnish options
AgencyDesign presentationThe design on the curve rather than as a flat wrap

Unlike cosmetics or fragrance, beverages are rarely about the single pack. What matters is the range: several flavours with a shared design system, and the multipack in which they are sold.

What does our example configurator show?

Our example configurator shows a 330 ml can of a fictional lemonade brand. Brand, flavours and texts are example values; no manufacturer commissioned or reviewed the demo. Live in the demo:

  • Three flavour designs: blood orange & rosemary, cucumber & mint, elderflower & lemon. Switching cross-fades the design.
  • Varnish: matt or gloss.
  • Condensation: the cold can with water droplets, on or off.
  • Pack: single can, 4-pack or 6-pack; the cans slide into a printed sleeve.
  • Open the can: the tab lifts, the panel breaks open, the tab settles back.
  • Turn 360°: a turntable mode.

How flavours, varnish and packs work technically is covered in beverage can in 3D: designs, varnish, condensation and multipacks.

Example configurator · fictional product

Beverage can 330 ml

A beverage can with three flavour designs, matt or gloss finish, condensation, single can, 4-pack or 6-pack – to turn and open.

Packaging · Colours · Materials and finishes · Options, modules and accessories

What does it deliver?

We do not promise metrics. You can check the benefit at these points:

  • Alignment in the team and with the agency: everyone sees the same can with the same design, in a browser, without special software.
  • Retail conversations: the range and the multipack can be shown before samples are printed.
  • Images from the same model: product images per flavour and pack can be produced from the 3D model, for the shop and presentations. That is project work, not part of the demo.
  • New flavours: another flavour is a new design on the same shape, not a new model.

Viewer, configurator or exploded view, and what a 3D product presentation can show, is set out on our 3D product viewer page.

Which questions should you settle first?

  • Who is watching? A viewer for internal alignment may show unfinished designs and needs no shop link. A viewer on the website needs approved designs and a short load time.
  • How many designs, and how often do new ones arrive? With seasonal flavours it pays to plan the swap of a design as a fixed, repeatable step.
  • Which packs? Single can, multipacks, trays: each pack is its own model with its own artwork.
  • Which starting state? The demo's embed reads a technical link parameter that lets a page start the can in a prepared state, such as the 6-pack or the open can. Visitors get no button for it, and there is no share feature. In a project, such a start state can make a link sent to a retail buyer open on the right pack.

Where are the limits?

  • No product or mandatory information. Every text on the demo can is design filler for a fictional brand. Whether the labelling on your can is complete is your responsibility, not the viewer's.
  • No material claims. The demo says nothing about can material, coatings or recycling.
  • Colour is an approximation. Print on metal looks different on screen than in the hand. The physical sample remains binding.

How does a project run?

  1. Scope: can format, number of designs, varnish options, packs.
  2. Data: print-ready wrap per flavour, notes on varnish and areas where bare metal shows, photos of samples, and the multipack artwork if there is one.
  3. Model and designs on the shape.
  4. Review via a private link.
  5. Go live as its own page or by snippet.

Scope and cost are explained in what a 3D configurator costs. How we build viewers and configurators: custom 3D configurator development.

Frequently asked questions

Does it work for other can formats?

Yes. Each format needs its own model; designs are placed on the wrap for each format.

Can we show unreleased designs without making them public?

Yes, via a private link. The viewer only becomes public when you embed it on your site.

What do you need to add a new flavour?

The print-ready wrap in the agreed format and, if there is one, the artwork for the multipack. Shape, lighting and varnish stay the same. How often such changes happen, and who uploads them, belongs in the scope.

Sources

  1. Demo features: the "Live in this demo" list on the Beverage can 330 ml library page and the demo source code (can.js, flavours.js), read 14 November 2026

Read next