Industries & use cases

Yard ramp configurator for manufacturers: features, benefits, implementation

What a 3D configurator for mobile yard ramp makers must do: length, bed height, forklift slope, checks, options and an enquiry with a PDF.

Short answer: a yard ramp configurator is worth building for makers of mobile, static and container ramps when it answers the question to settle before a quote: what slope does the ramp have at the vehicle's bed height, and is it below the limit the forklift maker gives? Add lift range, usable width, deck and accessories, and the enquiry arrives with every dimension and check result your sales team, dealer or rental desk needs to prepare a quote.

Mobile yard ramp configurator – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

Who is this for?

This guide is for managing directors, sales managers and product managers at makers of mobile and static yard ramps, container ramps and loading equipment, and at the dealers and rental firms that offer them [1]. In our assessment, enquiries come from warehouse and logistics managers, sites without a loading dock and companies that load and unload containers. Mobile yard ramps link the yard to the bed of a truck or container so forklifts can load without a dock on the building [1].

What is different about yard ramps?

  • The key figure is a result. The buyer picks length and bed height; the slope follows. It is the figure the buyer checks against their forklift.
  • The vehicle is part of the configuration. A truck and a container on a chassis have different bed heights and door openings.
  • The forklift sets the width. There must be room beside it, and the lip must fit the door opening.
  • Equipment depends on use. Hand pump or electro-hydraulic, deck, handrails, wheels: it depends how often and where the ramp is moved.

A form with "length" and "bed height" collects the values but does not answer the question behind them. A model that shows the slope live and turns red when it is too steep does.

How are ramps sold, and where does the configurator fit?

Yard ramps are offered directly by makers, through dealers and for rent. In our assessment, all three routes raise the same questions: which vehicle, which bed height, which forklift, what ground? A configurator asks them first and passes the answers on in a fixed structure. For dealers and rental firms that means a quote can be prepared from a complete configuration [1]. How such enquiries reach the right desk is covered in enquiries from machinery and loading equipment configurators.

Which capabilities matter?

CapabilityWhyIn our example configurator
Ramp type and vehicleMobile, static or container ramp; truck or containerYes
Length, level-off, usable width, bed heightDimensions of the use caseYes, with plus/minus and typed input
Live slopeThe core forklift questionYes, in % and degrees against an adjustable example limit
ChecksLift range, lip vs door opening, side clearance, level-offYes
EquipmentLift, capacity class, lip, handrails, wheels, support legsYes, capacity as an example class
Deck, finish, colourUse and appearanceYes: open or serrated grating, checker plate; galvanised or RAL
Enquiry with review and PDFQuote without a call-backYes: enquiry text to copy and a PDF
Your prices, routing to sales or dealersBudget figures, routingNo, built in a project

Everything in the right-hand column is on the "Live in this demo" list [1].

What does a maker gain?

We do not promise figures. The gains are in questions that would otherwise come before a quote:

  • Slope settled before the quote. If the slope is too high, the person enquiring sees it and chooses a longer ramp before your team prices anything.
  • The right version instead of a standard offer. Lift range, width and lip match vehicle and forklift.
  • Comparable enquiries for dealers and rental desks. Every enquiry has the same rows.

Where are the limits?

Slope limit, capacity classes and checks in the demo are example values, not ratings. What slope a forklift can manage depends on its maker's data; capacity, structure and compliance with standards are the ramp maker's responsibility. The configurator implements your values and does not replace the operator's risk assessment.

Try the example

Our yard ramp configurator is an example configurator with a fictional product and example values, built by Modelwright. Sizes, capacity classes, limits and checks are example values, with no statement on capacity, structure or standards [1]. It offers three ramp types, truck or container, the live slope against an example limit you set, an animated height adjustment in which the lip lifts and settles, four checks, equipment and deck, an example forklift for scale that drives onto the ramp, camera views and a review with enquiry text and PDF.

What we checked: we recalculated the slope readout by hand for eight configurations; panel, 3D label and enquiry text matched our own calculation each time. At the default settings (13.5 m overall length, 2.5 m level-off, 1.30 m bed height) it is 11.9 %. Device tests were emulated, not run on real phones.

Example configurator · fictional product

Mobile yard ramp configurator

Plan a mobile yard ramp: change the bed height and see the slope at once, checked against an adjustable example limit – with options, review checks and a PDF enquiry.

Industrial cells & machines · Dimensions and sizes · Options, modules and accessories · Materials and finishes

The slope, lift-range and check rules are explained in yard ramp slope and bed height rules.

How would it be built for your ramps?

For your product we build the configurator with your ramp types, length and width steps, lift ranges, capacity classes, lips and accessories, your limits and messages, your enquiry route and, if you want them, your prices. Drawings, size tables and photos are usually enough; CAD is used when it suits the web. The project process is on 3D configurator development, the cost factors in what a 3D configurator costs, and other uses in manufacturing in 3D configurators for manufacturers.

Frequently asked questions

Where does the slope limit come from?

In the demo it is an example value the user can set. What counts is the forklift maker's data; in your configurator your rules apply.

Can the enquiry go to dealers or rental firms?

In a project, yes, by email or webhook. In the demo, enquiry text and PDF are created; routing to a maker, dealer or rental firm is not built in.

Does it work on a tablet or phone?

It runs in the browser with no app. We tested the demo at seven emulated screen sizes from phone to desktop, not on physical devices.

Sources

  1. Modelwright library: mobile yard ramp configurator, product description, uses and "Live in this demo" list, read 14 November 2026: modelwright.de/en/library/yard-ramp-configurator/

Read next