Industries & use cases

Dock kit configurator for manufacturers of floating dock kits and swim platforms

What a 3D configurator for DIY floating dock kits needs: shape and lengths, ramp tilt check, swim island, decking, parts list and the route to the shop.

Short answer: a 3D configurator pays off for makers of floating dock kits when buyers assemble the dock themselves and order online or from a retailer. It builds shape and lengths on the model, shows how the access ramp sits as the water level changes, adds a swim island, anchor-stone holders and decking, and turns the configuration into a parts list: exactly what goes in the box.

Floating dock kit configurator – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

Who is this for?

This guide is for owners, e-commerce and product managers at makers of floating dock kits, swim platforms and dock accessories. Their buyers are, for example, owners of lake or garden plots, small clubs and operators of bathing spots who want to put up a dock on a lake or canal themselves; floating dock kits consist of floats, frames and decking and are assembled by the buyer [1]. Sales run through your own web shop, through retailers, or both.

With a kit, assembly is the buyer's job. That creates two requirements other dock configurators do not have in the same way: the buyer must understand what they are getting, and the order must be complete, because a missing part only shows up at the water's edge.

What is different about dock kits?

  • The parts list is the product. Floats, rails or frames, holders, connectors, decking and edge trim come as parts. What the configurator puts together must translate one-to-one into order lines.
  • Lengths in fixed steps. Main and head dock grow in whole metres or in your system's steps, not continuously.
  • The link to the shore is the tricky part. A hinged ramp takes up changes in water level; the shorter it is, the steeper it sits for the same change. That is quicker to grasp on a model than in a table.
  • Anchoring is the buyer's decision on site. Anchor-stone holders in the kit or posts at the shore: the configurator can record the choice but cannot decide what holds.
  • Decking or not. Some buyers want finished decking with a surface finish, others only the substructure.

Which features does a dock kit configurator need?

FeatureWhyIn the example configurator
Straight, L or T shapechoose the basic shapeyes
Main and head dock lengthset the sizeyes, in whole metres
Access ramp with tilt checkunderstand the link to the shoreyes, hinged, 1–3 m, tilt per water level
Swim islandoffer an add-on moduleyes, as an option
Anchoring accessoriescomplete the orderyes, anchor-stone holders
Decking and finishchoose the lookyes: larch fresh, glazed or weathered, or no deck
Parts listbox contents and orderyes, with sample quantities
Enquiryprepare the ordercopy the text and download a PDF
Cart, prices, shippingcomplete the purchase in the shopno, in a project

How does the configuration reach the shop?

For kit makers, the obvious next step after the configurator is the cart. Technically, every parts-list line maps to a product or variant in your shop, and the configurator adds the lines with their quantities. Three questions to settle before the project:

  1. Is every part its own product? If not, you need bundles such as a "connection set", or an enquiry instead of a purchase.
  2. Who checks before shipping? For larger docks a short check by your team before payment can make sense.
  3. Which shop system? The integration depends on it; we assess it per system.

If you also sell through retailers or garden centres, you need a second exit: the same configuration as an enquiry with a parts list that the retailer takes over. The configurator can offer both; which appears when is your rule, for example by dock size or country. The cart hand-over is not part of the demo.

What does it change?

We do not promise figures. The value lies in questions that arrive by e-mail today:

  • "What do I need for an 8-metre dock with a head?" The parts list answers it.
  • "How steep will the ramp be?" The buyer sees the tilt at different water levels.
  • "What will the timber look like in a few years?" Fresh, glazed and weathered finishes can be switched on the model.
  • Complete orders. Holders and connectors are on the list before anyone forgets them.

Because the buyer assembles the dock, the same 3D model can help after the sale too, for example as an assembly view. Exploded and step-by-step views are covered on exploded and function views.

What the configurator does not take on

How much a dock may carry, how it is anchored and whether it may be put up on a given shore are set by you as the maker or settled by the buyer on site, with the relevant authority where required. The configurator only carries what you release for your system. In our example, quantities and the tilt check are simplified sample values: not a structural design and not a quote [1].

Example: our dock kit configurator

The floating dock kit configurator is an example configurator by Modelwright with a fictional product and example values. According to its library page it offers straight, L or T shapes, main and head dock length in whole metres, a hinged access ramp of 1–3 m with a water-level tilt check, a swim island option, anchor-stone holders, a larch deck (fresh, glazed, weathered) or no deck, a parts list with sample quantities, and an enquiry text to copy and download as a PDF [1].

Example configurator · fictional product

Floating dock kit configurator

Put together a floating dock kit: straight, L or T shape, lengths, access ramp with a tilt check, swim island and timber deck – with a parts list and a PDF enquiry.

Docks & marine · Dimensions and sizes · Materials and finishes · Options, modules and accessories

How the parts list and the ramp check work in detail is covered in dock kit logic: parts list, ramp and water level. For the project process, see custom 3D configurator development.

Frequently asked questions

Does the configurator show prices?

The demo does not. In a project, prices can come from your data or from the shop.

Can lengths grow in other steps?

Yes. Step size and limits come from your system, for example from the lengths of your rails or frames.

Which languages are possible?

The demo exists in German and English. In your project we set up the languages of your markets.

Sources

  1. Modelwright library, floating dock kit configurator, product description, "Live in this demo" list and sample-value note, read 14 November 2026: modelwright.de/en/library/dock-kit-configurator/

Read next