Horse stall configurator software for stall front and barn equipment makers
What a 3D configurator should do for makers of horse stall fronts: sliding or hinged doors, aisle space, grills, feeders, finishes and enquiries.
Short answer: for a maker of horse stall fronts and barn equipment, a configurator is worth building when it shows the choices that are hard to explain in a brochure: a sliding or a hinged door and what the open door needs in the aisle, how grills, mesh, wood fills, yokes and feeders look together, and how many stalls of what size the barn needs. The enquiry then states the count, the sizes and the build.
This guide is for owners, sales managers and product managers at manufacturers of stall fronts, partitions and complete stall systems, for example steel fabricators with powder coating and timber or plastic infill. Their buyers are barn builders and contractors putting up a post-frame or steel barn, equestrian centres and private yards, and in some markets dealers who sell barn equipment.
Why are stall fronts a configuration problem?
A stall front is an interior fit-out for a building that already exists or is being designed. The shell is fixed; the decisions are about the row of stalls in front of the aisle:
- The door decides the aisle. A hinged door swings into the aisle; a sliding door runs along the front. In a narrow aisle that is a planning question, not a matter of taste.
- Options belong to particular fronts. A yoke or a given feed opening does not suit every series or door top.
- Quantities come from the row. Stall width times count gives the length of the row, which has to match the barn.
- Finishes are part of the sale. Powder-coat colour, infill species, board direction and rust protection are choices a catalogue photo can show for one combination only.
- Movement explains features. How a swivel feeder or a feed door works from the aisle is understood faster when it moves.
Which capabilities matter?
| Capability | Why | In our example configurator |
|---|---|---|
| Series and door type with style options | Compare your ranges side by side | Yes: sliding door, or hinged low or high fronts |
| Stall width, depth and count, aisle width | Match the stalls to the barn | Yes |
| Door fill, yoke, feed opening, top fill, partitions | The build of each stall | Yes |
| Powder-coat colour, wood fill and orientation, rust protection | See finishes before ordering | Yes |
| Door and feeder animations | Show the function instead of describing it | Yes |
| Aisle clearance and review checks | Catch a space problem before the site visit | Yes |
| Enquiry with count and sizes | Price without a call-back | Enquiry text and a PDF |
| Your prices, parts lists, freight | Budget figures and costing | No, built in a project |
What does a stall maker gain?
We do not promise figures. The gains are in the back-and-forth between maker, barn builder and owner:
- The door question before the visit. Someone planning hinged doors in a narrow aisle sees the clash on the model and can switch to sliding doors.
- Fewer sample requests. Infills, board direction and colours are visible, including combinations you have never photographed.
- Counts you can quote from. The enquiry gives the number of stalls, sizes and build, not "about ten stalls".
- One reference for everyone. The barn builder can pass the PDF to the owner and back.
Try the example
Our horse stall fronts configurator is an example configurator with a fictional product and example values; no manufacturer ordered, reviewed or endorsed it. As listed on its library page, it offers series A with a sliding door or series B hinged low or high fronts, with style options; stall width, depth and count, and aisle width; door fill, yoke, feed opening, top fill and partitions; powder-coat colour, wood fill and orientation, and rust protection; door-open and feeder animations; aisle clearance and review checks; and an enquiry text that can be copied and downloaded as a PDF.
Sizes and checks are simplified sample values, not a quote. The demo makes no statement on safety, animal welfare or standards.
Example configurator · fictional product
Horse stall fronts configurator
Put together horse stalls: sliding or hinged fronts, stall width, depth and count, aisle, fills and colours – with door and feeder animations, checks and a PDF enquiry.
How door type, aisle and options interact is explained in stall front door swing and aisle rules.
How is this different from field shelters?
The field shelter configurator in the same group plans a building in a paddock, where the question is whether it fits the field. Stall fronts are planned inside a barn, between the row of stalls and the aisle. The sales route differs too: a field shelter is delivered and erected as a building, stall fronts go into a construction project where several trades may be involved.
Where does the configurator sit in your sales process?
Two places suggest themselves. On your website it serves owners and builders who want a picture before the first call. In the conversation itself, on the phone or standing in the barn, it gives your sales rep or the barn builder a shared picture where door type and infills are changed on the spot. Both are the same browser application; which comes first decides how much explanation and checking it needs.
How would it be built for your range?
For your product we build it with your series and door styles, your stall sizes, infills and feeding systems, your colours and timber options, your rules for which option fits which front, and your enquiry route. Drawings, size tables and photos are usually enough; CAD is used when it suits the web. If you sell in both imperial and metric markets, we set up the units and languages you need. How enquiries move on to barn builders, dealers and site surveys is covered in enquiries for equestrian and livestock buildings. For hiring us, see custom 3D configurator development.
Frequently asked questions
Does it replace measuring the barn?
No. It delivers a complete enquiry with count, sizes and build. Dimensions on site are still checked by your team or the barn builder.
Can it plan two rows and a whole barn aisle?
The demo covers stall width, depth and count and the aisle width, so one row of stalls with its aisle. Facing rows, corner stalls or wash bays can be added in a project if you offer them.
Can it work in millimetres instead of feet and inches?
Yes. In your project we set the default units and languages for each market.
Sources
- Modelwright library: horse stall fronts configurator, "Live in this demo" list (read 14 November 2026): /en/library/stall-fronts-configurator/


