Industries & use cases

Horsebox and horse trailer configurator software for manufacturers and coachbuilders

What a 3D horsebox and horse trailer configurator needs: vehicle type, stall layout, ramps, ramp angle, living area, example payload and dealer enquiries.

Short answer: a horsebox or horse trailer configurator has to show what a photo cannot: how the horses stand, how they load and unload, how steep the ramp is, and how the horse area and the living area fit together. It leads from vehicle type through stall layout and fit-out to an enquiry that your dealer or sales team can answer without a round of questions. Weights, registration and regulations stay with the manufacturer throughout.

This guide is for owners, sales and marketing managers at manufacturers and coachbuilders of horse trailers, 3.5 t and 7.5 t horseboxes, livestock transport bodies and vehicle bodies with living areas, and for the dealers who sell them. The people who enquire are leisure riders, competition riders, breeding and livery yards, commercial transporters and equine clinics. Their questions differ, and so do their vehicles.

Horse trailer & horsebox configurator – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

Horsebox, horse trailer, horse float: one product, several names

Wikipedia notes that a horse trailer is also called a horse float in Australia and New Zealand and a horsebox in the British Isles, and that in the UK "horsebox" may also mean a motorised vehicle adapted to carry horses [1]. A configurator for several markets needs the right word in each, not a literal translation. The same applies to the weight classes buyers think in. As general information: GOV.UK lists category C1 for vehicles between 3,500 and 7,500 kg maximum authorised mass (MAM), with a trailer up to 750 kg [2], so in the UK the choice between a 3.5 t and a 7.5 t horsebox also touches the driving licence. Which licence a driver needs is for the driver and the dealer to check, not for the configurator.

What makes horseboxes different from other products?

  • The vehicle type decides almost everything. Towed trailer, 3.5 t or 7.5 t horsebox: that sets how many horses travel, which stall layouts are possible, whether there is a living area and which ramps are offered.
  • The stall layout is its own decision. Straight forward-facing, herringbone or rear-facing: each layout changes the interior and access.
  • Loading and unloading matter. Rear ramps, side ramps and front unload ramps each serve a purpose, and not every vehicle has every ramp.
  • The interior is the product. Partitions, breast bars, flooring, tack locker or tack room and, on larger vehicles, the living area are invisible from outside.
  • Payload is a buying question. Buyers want to know how much reserve is left after horses and kit. A configurator may only show that as an example or with the manufacturer's binding figures.

Which features does a horsebox configurator need?

FeatureWhyIn the example configurator
Vehicle type and number of horsesbasic decision firstyes: trailer, 3.5 t or 7.5 t horsebox, 1 to 3 horses
Stall layoutplan interior and accessyes: straight, herringbone, rear-facing, with example rules per vehicle type
Partitions, breast bars, flooring, tack storageinterior fit-outyes
Living areafit-out on the larger vehicleyes: seating, kitchenette, luton bed on the 7.5 t
Rampsloading and unloadingyes: rear, side, front unload ramp, extension flap
Ramp anglemake steepness visibleyes, live while the ramp lowers, as an example value
Cut-away viewshow the interior without a visityes, horse area and living area
Windows, vents, colour, livery stripe, wheelsspecification and lookyes
Payloadestimate the reserveonly as an example calculation from example weights
Enquiry with use and timingdealer can prioritiseyes, enquiry text and PDF
Your pricesprice rangeno, in a project

What do manufacturers and dealers get out of it?

We do not promise figures. The value sits in questions that are settled by phone or at the yard today:

  • The dealer knows what it is about. The enquiry names vehicle type, horses, layout, ramps, fit-out, colours, intended use and timing.
  • Invalid combinations do not arrive. A layout a vehicle type does not offer cannot be chosen.
  • The interior is visible. The cut-away shows horse area and living area without a demonstrator.
  • The ramp becomes tangible. Watching the ramp lower and a horse walk in explains the difference between a standard ramp and an extension flap.

Example: our horse trailer and horsebox configurator

The horse trailer and horsebox configurator is an example configurator by Modelwright with a fictional product. Sizes, weights, ramp angle and checks are simplified sample values; it makes no statement on weights, registration, road-traffic or animal-transport rules. Binding figures come from the manufacturer.

It takes the buyer through six steps: vehicle, interior, ramps, exterior, review and enquiry. The ramp lowers on gas struts, the angle is shown live, then a stylised horse walks in. The enquiry step has fields for intended use (for example leisure, competition, breeding, commercial transport, equine clinic) and timing. The interface switches between English and German.

What we checked: the 42-step journey ran without errors at seven emulated screen sizes from phone to desktop; tests were emulated, not run on physical devices.

Example configurator · fictional product

Horse trailer & horsebox configurator

Put together a horse trailer or horsebox (3.5 t or 7.5 t): number of horses, stall layout, partitions, tack room, living area, ramps, colour and wheels – with a cut-away view, a lowering ramp with an angle readout, an example payload calculation and a PDF enquiry.

Vehicles & trailers with interior · Dimensions and sizes · Colours · Materials and finishes

The individual rules are explained in horsebox configurator rules: layout, ramp angle and payload.

What a horsebox configurator must not say

With vehicles for animals, the line between presentation and promise matters. A configurator shows a specification and calculates with the values it has been given. It does not establish whether a vehicle can be registered, whether a combination may be driven or whether a fit-out meets animal-transport requirements. That is the manufacturer's responsibility, and for towing combinations the dealer checks it with the buyer. In practice every number that looks like a weight, an angle or a size is labelled as an example value or a manufacturer figure.

How would it be built for your range?

For your product we build it with your models and chassis, your stall layouts and fit-outs, your ramps with their sizes, your living areas, colours and liveries, your approved weights if you want a payload calculation, your enquiry route and, if you want them, your prices. Whether enquiries go to you, to the nearest dealer or to both is covered in trailer configurator enquiries, dealers and follow-up. For hiring us, see custom 3D configurator development.

Frequently asked questions

Should a configurator show payload?

Only in the way you are prepared to stand behind. The demo calculates with example weights and says so. With your binding figures we build the calculation the way you approve it; responsibility for the figures stays with the manufacturer.

Can dealers use it?

Yes. It runs in the browser with no app, including on a tablet at the yard or a show. How enquiries are routed to dealers is set in the project.

Sources

  1. Wikipedia, "Horse trailer" (redirected from "Horsebox"), read 14 November 2026: en.wikipedia.org/wiki/Horsebox
  2. GOV.UK, "Driving licence categories", read 14 November 2026: gov.uk/driving-licence-categories

Read next