In-plant office configurator software for modular office manufacturers
What a 3D configurator for in-plant offices needs: panel grid, storeys, wall fields as windows or doors, rooms, HVAC, electrics and a hall-clearance check.
Short answer: for makers of in-plant offices, modular wall systems, control rooms and two-storey room systems, a configurator is worth building when buyers can lay out their own office on your grid: choose size and storeys, tap wall fields to turn them into windows or doors, set rooms, HVAC and electrics, and see whether it all fits under the hall ceiling. The enquiry then arrives with a floor plan, door and window positions and the hall height, not "office, about 30 m², in the warehouse".
This guide is for managing directors, sales and product managers at manufacturers of in-plant offices, supervisor offices, workshop cabins, control rooms and room-in-room systems, and for the dealers and installers who sell them. Buyers are plant and production managers, warehouse managers, facilities and logistics leads. They need a room inside an existing building for a shift lead, a control station, breaks, meetings or a stores counter, without putting up a new building.
These buyers know their building, the forklift routes and the crane runway. They do not know your wall grid, and they easily underestimate how much height a second storey or a rooftop unit needs. Sales often runs in two stages: a dealer or installer takes the brief, the manufacturer prices and supplies. A configurator both use keeps details from getting lost between the two.
What makes in-plant offices different?
- The grid is the product. Width and depth come in whole wall fields, and each field can be solid, half-glazed, fully glazed or a door.
- The building sets the ceiling. One storey, a walkable storage deck or two storeys with a stair: the overall height has to fit with clearance under the roof structure or crane runway.
- The floor plan is part of the order. Rooms, partitions, door swings and the stair decide how the office is used.
- Services come along. Ceiling, HVAC and electrics are options buyers mention early but rarely describe precisely.
Structural design, fire safety, escape routes and workplace requirements are for the manufacturer and the operator to assess for the actual project. A configurator does not replace that. It can apply the rules you set for your system and show conflicts before anyone prices the job.
Which features does it need?
| Feature | Why | In our example configurator |
|---|---|---|
| Width and depth on the grid, typical sizes | Sizes you supply, quick start | Yes, 1.20 m or 4 ft |
| Wall height and storeys | One storey, storage deck or two storeys | Yes, with an example stair and railing |
| Tap a wall field: wall, half glass, full glass, door | Plan the elevation on the model | Yes, in 3D and on the plan |
| Double door, sliding door, hinge side | Settle access | Yes |
| Floor plan with dimensions, rooms, door swings | Plan the use | Yes |
| Floor area, wall fields, glazing share live | Order of magnitude for a quote | Yes |
| Rooms, ceiling, HVAC, electrics | Equipment | Yes, 1 to 3 rooms |
| Checks: hall ceiling, stair, access, sliding door | Show conflicts early | Yes, as example checks |
| Structural, fire safety, prices | Binding design | No |
What does it change for makers and dealers?
We do not promise figures. But a few steps between first enquiry and quote get easier:
- The floor plan arrives with the enquiry. Your team sees size, rooms, doors and windows instead of asking for them on the phone.
- The hall height is known. Anyone planning two storeys enters the clear hall height and sees whether the clearance is enough.
- Glazing share and field count are stated. These are quantities that typically feed into pricing for wall systems.
- The buyer can get sign-off. A PDF with a 3D view and a top view helps with approval by plant management or purchasing.
Example: our in-plant office configurator
The in-plant modular office configurator is an example configurator by Modelwright with a fictional product. Sizes, stair, decks and checks are simplified sample values, not a quote and no statement on statics, fire protection or standards [1]. It plans width and depth on a 1.20 m or 4 ft grid, wall height, one storey, a walkable storage deck or two storeys with an example stair. Tapping a wall field in 3D or on the plan cycles it through wall, half glass, full glass and door. There are also 1 to 3 rooms, ceiling, HVAC unit, an electrical package, finishes and colours, and example checks for clearance to the hall ceiling, doors under the stair, access and the neighbour of a sliding door.
What we checked (emulated, not on real phones): an independent review tested the demo on seven screen sizes and recomputed the live readout. An office of 6 × 4 fields on the 1.20 m grid showed 34.6 m², 20 wall fields and 22 % glazing, matching the hand calculation. Tapping wall fields worked with mouse and touch.
Example configurator · fictional product
In-plant modular office configurator
Plan an in-plant office on a panel grid: choose the size and storeys, tap wall fields to turn them into windows or doors, set rooms, HVAC, electrical and colours – with a floor plan, a hall-clearance check and a PDF enquiry.
How wall fields, storeys, stair and the clearance check work as rules is covered in in-plant office configurator rules: wall fields, storeys and checks.
How would it be built for your system?
We build it on your wall system: grid, wall heights, panel types with glazing and doors, your deck and storey variants, stairs, finishes and colours, and your rules, such as which fields may take doors or which spans work without a column, as your engineering defines them. Prices per field and per square metre, and a parts list, can be added if you want them. Photos, drawings and dimension tables are usually enough; we use CAD when it suits the web.
Who receives the enquiry is covered in configurators for stores, booths and enclosures: from enquiry to quote, and the project in custom 3D configurator development.
Frequently asked questions
Does the configurator check structure or fire safety?
No. It runs example checks such as clearance to the hall ceiling. Structure, fire safety and escape routes are for the manufacturer and the operator.
Does it work with imperial grids?
Yes. The demo offers 1.20 m or 4 ft and shows sizes in metres or feet. Your own grid is one entry in the data.
Can sales use it on a site visit?
Yes, in the browser on a tablet. We tested emulated devices, not real ones.
Sources
- Modelwright library, in-plant modular office configurator, "Live in this demo" list, read 14 November 2026: modelwright.de/en/library/inplant-office-configurator/


