Site cabin and welfare unit configurator for manufacturers and hire companies
What a 3D configurator needs for makers and hire firms of site cabins, welfare units and steel modules: length, use, wall grid, stacking, towable, hire.
Short answer: a 3D configurator pays off for makers and hire companies of site cabins and welfare units when it answers a site manager's questions in the order they are asked: what is the unit for, how long is it, where are the windows and doors, which rooms are inside, is it stacked or towable, and is it to buy or to hire? The enquiry then arrives with a plan, the wall layout and the build, instead of "a 20 ft office, please".
This guide is for managing directors, sales and hire-fleet managers at makers and hire companies of site cabins, anti-vandal offices, toilet blocks, drying rooms, towable welfare units and steel room modules. Enquiries come from site managers and buyers at building and civil engineering contractors, from event organisers, from industrial sites needing space for staff or storage, and from other hire companies topping up their fleet.
These buyers are short of time and have a clear task: the site needs an office, a canteen, a drying room and toilets, often by a fixed date. They do not want advice on colours; they want a unit that matches the need.
What makes cabins different from other buildings?
- Length comes from a short list. Modules are built in fixed lengths; the demo names them in feet. Width and height have few steps.
- Use decides the walls. An office needs windows, a store a wide door on the end wall, a generator bay louvres.
- The wall is a grid. Each wall position is solid, a window or a door. What looks like free choice is the filling of fixed slots.
- One unit holds several rooms. A welfare unit combines canteen, drying room, WC and generator bay in one module.
- The site gets locked up. Steel shutters and door bars are a selling point that is hard to show in a brochure.
- Buy or hire. Units are bought or hired. For a hire company an enquiry is an availability question; for a maker it is an order.
Which capabilities matter?
| Capability | Why | In the example configurator |
|---|---|---|
| Length, width, height from lists | only units you build | yes: 10, 12, 16, 20, 24 or 32 ft; 8 or 10 ft wide; standard or high |
| Use with a starting proposal | get to the right unit fast | yes: office, canteen, drying room, toilet block, store, welfare unit with generator bay |
| Fill wall positions | place windows and doors | yes, by tapping in 3D or on the plan |
| Rooms with the roof off | show the layout | yes, tap room zones, with furniture blocks |
| Stacking | two storeys on a small footprint | yes, with external stair, walkway and railing |
| Towable version | towable welfare units | yes, with chassis, drawbar, axles and corner steadies |
| Close the site | show the security fittings | yes: roller shutters come down, locking bars swing across the doors |
| Example checks | catch planning mistakes early | yes: access, windows in rooms people use, generator bay, footprint |
| Buy or hire in the enquiry | route to the right team | yes, as an enquiry field |
What does a maker or hire company gain?
We do not promise figures. The gain is in questions almost every enquiry raises today:
- The wall layout is fixed. Windows and doors are chosen and visible on the plan.
- The room layout is clear. A welfare unit arrives with canteen, drying room, WC and generator bay in a set order.
- Impossible combinations do not arrive. A stacked unit cannot also be towable.
- The enquiry lands in the right place. Type of work and buy or hire are in it.
What changes if you hire rather than sell?
A hire company sells availability, not configurations. Its fleet consists of standard units it does not rebuild for each job. For hire, the configurator has a different job: it helps the site manager pick the right combination of existing units, say a 20 ft office and a welfare unit, and could show how that looks stacked or side by side; the demo plans one module, single or stacked. Free wall layout would get in the way.
For a maker who also builds custom units, free wall layout is the core. The demo shows both in one place: the use sets a starting proposal, and anyone can then change single positions. In a project you decide how much freedom your range allows, and whether sale and hire share one interface or get separate entry points.
Which rules apply to site welfare facilities?
In Great Britain, the HSE states that everyone who works on a construction site must have access to toilets and facilities for washing, changing, eating and rest, and points to Schedule 2 of the Construction (Design and Management) Regulations 2015 [2]. A configurator cannot meet or confirm such requirements. What a site needs is the responsibility of the duty holders on that site; which of your units are suitable is set out by you as the maker or hire company with your own documents. The configurator can offer your checked units and make the enquiry complete.
Try the example
The site cabin and welfare unit configurator is a Modelwright example configurator with a fictional product. Sizes, equipment, stair, chassis and checks are simplified sample values, with no statement on statics, safety, road approval or standards [1]. The 20 ft welfare unit starts with two bays of canteen, a drying room, a WC and a generator bay at the end wall with louvres. In an independent check, the demo completed all 48 steps of the test journey on seven emulated screen sizes from 360 to 1,440 px wide, including stacking, the towable version and "close site"; real devices were not tested.
Example configurator · fictional product
Site cabin & welfare unit configurator
Plan a site cabin or welfare unit: length from 10 to 32 ft, use, windows and doors on a grid, tap rooms with the roof off, stack two high or make it towable – and close the site with one click: the shutters come down and the doors are barred.
How the wall grid, room zones, stacking and the towable version work as rules is covered in site cabin configurator: wall grid, stacking and towable rules.
How is it built for your range?
We build it with your module lengths, wall grids, window and door types, uses, room options, stacking and chassis rules, cladding and colours, and your enquiry route, separately for sale and hire if you want. Photos, drawings and size tables are usually enough; we use CAD data when it is suitable for the web. How the enquiry reaches sales or the hire desk is covered in enquiries from hall and modular building configurators; the project process in 3D configurator development.
Send us your module range – you get a proposal and a fixed-price quote.
Frequently asked questions
Can the configurator show fleet availability?
Not in the demo. A link to your hire system would be an integration we assess case by case; ERP integrations are not standard with us.
Does it work in metres?
Yes. The demo switches between m and ft; in your project your own names and units apply.
Is the demo's stacked build checked?
No. Stair, walkway and railing are only an example; design and loads are set by the manufacturer.
Sources
- Modelwright library, site cabin and welfare unit configurator, "Live in this demo" list, read 14 November 2026: modelwright.de/en/library/site-cabin-configurator/
- Health and Safety Executive, "Welfare: Overview", read 14 November 2026: hse.gov.uk/construction/healthrisks/welfare/


