Industries & use cases

Enquiries from configurators for halls, pavilions and modular buildings: sales, dealers and hire

How configurators for steel halls, pavilions, guard booths, restroom blocks and site cabins hand enquiries to advisers, dealers, hire desks or planners.

Short answer: for halls, pavilions and modular buildings, a configurator almost never ends at a checkout. It ends at an enquiry, and each product type sends it somewhere else: to a field adviser for a steel building, to a dealer for a pavilion, to project sales for a guard booth, to early design for a council's restroom block, to sales or the hire desk for a site cabin. It does its job when the enquiry holds exactly what that recipient needs for the next step, and when it is clear what the enquiry is not: a quote or a design.

Prefab restroom building configurator – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

Who receives the enquiry, and what do they need?

The five product types in this group have different buyers and therefore different routes. The table shows typical routes; which one applies to your business is your call.

ProductTypical buyerTypical recipientWhat they need first
Steel hallfarmer, business, equestrian centrefield sales advisersize on the grid, doors, site, wishes
Timber pavilionhospitality, council, event operatorsales office or dealerseries, size, kit or install, contact
Guard boothplant, car park operator, architectproject salesstyle, size, equipment, standard plan yes/no
Restroom buildingcouncil, campsite, consultantsales with early designroom schedule, plan, location type, delivery
Site cabinsite manager, event organiser, hire companysales or hire deskmodule, use, wall layout, buy or hire

The right-hand column is the list of mandatory fields. Anything beyond it can be optional. Every extra mandatory field can put buyers off; every missing one causes a follow-up call. That trade-off belongs at the start of a project, not at the end.

What do the example configurators do today?

All five demos are Modelwright example configurators with fictional products and example values. No manufacturer commissioned or reviewed them. For the sales route it matters to separate exactly what they do:

  • Enquiry text and PDF in all five. According to the "Live in this demo" lists, every demo produces enquiry text to copy and a PDF [1].
  • Wishes kept apart from facts. In the steel hall configurator, insulation, erection, foundation and solar are "wishes for the quote", not configuration.
  • Price guidance. The steel hall shows a fictional sample price band, the timber pavilion configurator fictional sample prices per series and size. Guard booth, restroom building and site cabin are listed in the library without the "pricing logic" feature; the restroom building and site cabin show no price.
  • Planning notes. The guard booth configurator says whether the size matches a standard plan and gives foundation and shipping checks, as simplified sample values.
  • Who is asking. The restroom building configurator asks for company or council, email, phone, location type and delivery. The site cabin configurator asks for the type of work (building site, civil works, events, industrial site, hire fleet) and whether the unit is to be bought or hired.
  • Checks in the enquiry. For the restroom building and the site cabin, the results of the example checks, such as transport modules or the generator bay position, are part of the enquiry text.
  • Privacy in the preview. In these two demos nothing is sent or stored; text and PDF are created in the browser, and only which features were used is counted.

What would be project work?

  • Sending by email or webhook to your sales team. That is part of our usual project scope; in the demos it is switched off on purpose.
  • Routing to dealers or field sales, for example by postcode or territory. Not in any demo; we assess it per project.
  • Handing over to a CRM is assessed case by case. ERP integration, quote PDFs with binding prices and CPQ are not standard with us.
  • Fleet availability for hire companies. That would be an integration with your system and is not in the demo.
  • Role fields, such as "architect on behalf of …", with mandatory fields per role. Which fields your sales team needs is set in the project.
  • Attachments such as a site plan or photos of the location. Not in any demo.

The line between the two lists belongs in every quote. For a wider view of what configurators do for manufacturers, see 3D configurators for manufacturers.

What belongs in every enquiry, whatever the product?

Besides product-specific details, there is a core that is the same for all five building types:

  • Contact and role: who is asking, for whom, and may sales call?
  • Location: at least a postcode or region, because delivery, installation and the responsible dealer depend on it.
  • Timing: "now", "this year" or "early planning".
  • The configuration itself, line by line, in the same order as on screen.
  • The check results, including notes and warnings.
  • The label saying this is a non-binding configuration with guide values.

Location and timing belong in the first release of a project, because they decide the recipient. In our two own demos, restroom building and site cabin, neither asks about timing, for example; that would be an addition.

How does the configurator qualify without putting buyers off?

With buildings, many enquiries start as early planning. A council comparing three versions of a restroom block will not order next week. A site manager who needs a welfare unit on Monday will. The configurator can help tell them apart without turning either away:

  • Ask about timing and delivery. "Prefab module with setting", "delivery only" or "not decided yet" says a lot about how mature an enquiry is.
  • Separate buy and hire. For site cabins, the enquiry then reaches the right team.
  • Notes, not blocks. A guard booth outside the standard plans or a restroom block arriving in two modules is not an error but information. The demos show such cases as a note or warning and still allow the enquiry.
  • Set price expectations. A price band or "from" price prevents enquiries with the wrong budget. If you do not want to show a price, it can go to sales in the enquiry only.

All checks in the demos use example values. What a real building needs, such as foundations, transport or site requirements, is decided by you as the manufacturer together with your structural engineer and the relevant authorities. The configurator only applies your rules.

Dealers, field sales and the hire desk

Answer three questions before the project starts:

  1. Who sees what? Dealers and field sales sometimes need information the public does not see, such as internal prices. That is a separate access level and belongs in the scope.
  2. Where does the configurator run? On your website, embedded at dealers, on a tablet at the site visit or at a show. It runs in the browser with no app; the enquiry is the same everywhere.
  3. What happens after the enquiry? A call back, a site visit, an availability check or a quote. That decides which fields are mandatory.

How do you know the enquiry route works?

We do not promise figures. You can, however, measure your own process: how many enquiries need a follow-up question before a quote is possible? How long from enquiry to quote? How many land with the wrong recipient? Record these before launch, or there is nothing to compare after a few months. Which events the configurator counts for this, such as "PDF created" or "enquiry sent", we set up with you in the project.

The five examples

Example configurator · fictional product

Steel hall configurator

Plan a steel hall: machine or riding hall, width, length and wall height with drag handles, snow zone, gates and light panels, colours – with a sample price band and a PDF enquiry.

Halls & large structures · Dimensions and sizes · Colours · Options, modules and accessories

Example configurator · fictional product

Timber pavilion configurator

Put together a timber pavilion: seven series, size by drag handle or input, gable or hip roof, knee braces, privacy slats, wood species and stain – with sample prices and a PDF enquiry.

Halls & large structures · Dimensions and sizes · Colours · Materials and finishes

Example configurator · fictional product

Guard booth configurator

Plan a guard or ticket booth: three styles, length and width, roof, door, cashier window and equipment, colours and glazing – with foundation and shipping checks and a PDF enquiry.

Pods & booths · Dimensions and sizes · Colours · Materials and finishes

Example configurator · fictional product

Prefab restroom building configurator

Plan a prefab restroom building for a park, campsite or trailhead: pick the rooms, set the layout, roof and facade, tap doors to open them – with a roof-off floor plan, a day/night view and a PDF enquiry.

Pods & booths · Dimensions and sizes · Colours · Materials and finishes

Example configurator · fictional product

Site cabin & welfare unit configurator

Plan a site cabin or welfare unit: length from 10 to 32 ft, use, windows and doors on a grid, tap rooms with the roof off, stack two high or make it towable – and close the site with one click: the shutters come down and the doors are barred.

Halls & large structures · Dimensions and sizes · Colours · Materials and finishes

Next step

Write down who receives your enquiries today, which details are missing in the first call and what must be settled before a quote. Those three lists make up the enquiry fields. For what a configurator for your range costs, see scope and cost for hall and modular building configurators; for how we build it, 3D configurator development. After a first exchange by email you receive a fixed-price quote.

Send us your current enquiry route – we show you which fields the configurator should deliver.

Frequently asked questions

Does the configurator enquiry replace a quote?

No. It prepares one. Prices in the demos are fictional sample values; in a project they are labelled as guidance.

Can the enquiry go straight to the right dealer?

Technically yes, for example by webhook with a postcode mapping. It is not in the demos; we assess it per project.

Is the PDF suitable for committees or tenders?

As a basis for internal discussion, yes. It does not replace a specification or a design.

Sources

  1. Features of the example configurators: "Live in this demo" lists on the linked library pages, read 14 November 2026.

Read next