Industries & use cases

Spray booth configurator software for booth manufacturers and dealers

What a 3D spray booth configurator needs: airflow types, booth length and vehicle size, a bay fit check, options with availability rules and an enquiry.

Short answer: for makers and dealers of paint spray booths, prep stations and workshop ventilation, a configurator pays its way when it answers the two questions every enquiry starts with: which airflow type suits the shop, and will the booth and the vehicle fit the bay they already have? It lets the buyer switch between booth types, checks length, width and clear height against the bay, offers only options that go with the chosen booth, and sends the bay dimensions with the enquiry.

This guide is for owners, sales managers and product managers at spray booth manufacturers and distributors. Their buyers are collision repair and refinish shops, commercial vehicle workshops, industrial finishers and businesses converting an existing unit. Typically it is the owner or workshop manager preparing an investment, comparing quotes and talking to a lender or a builder. They know their building and their vehicles; what they often do not know is what each booth type implies for the floor, the length of the bay or a second door.

Spray booth planner – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

What makes spray booths different?

  • Airflow is the first decision. Cross-flow, semi-down, tower, side or full downdraft: construction, options and often the price depend on it, and buyers easily mix up the terms.
  • The vehicle sets the length. A van needs a different booth from a car, and the working space around the vehicle is part of the choice.
  • The bay is fixed. Length, width and clear height limit what is possible at all, and that often only becomes clear at the site survey.
  • Options depend on each other. An extension, drive-through doors, air make-up heating, a control centre, ducting, a motor or an in-ground pit do not all suit every booth.

Then there is engineering and permitting. Ventilation performance, fire and explosion protection, and the permits a site needs are for the manufacturer, the operator and the relevant authorities to settle. A configurator does not replace that; it makes sure that conversation starts from the right data.

Which features does it need?

FeatureWhyIn our example configurator
Booth models by airflow typeChoose a type buyers understandYes, five models
Animated air pathShow how the types differYes
Booth length and vehicle sizeMatch the work area to the vehicleYes, a vehicle size class in the work area
Bay length, width and clear height checkDoes it fit the building?Yes
Options with availability rulesValid combinations onlyYes
FinishSet the buildYes, galvanised or powder coat
Cut-away, closed and plan views, size labels, ft/mmExplain the layoutYes
Enquiry with bay dimensionsQuote without a call-backEnquiry text and PDF
Ventilation design, permits, pricesBinding planningNo

What should a buyer have settled before enquiring?

A good configurator does not ask everything; it asks what your sales team needs for a first quote. For spray booths we would suggest:

  • the inside size of the bay or room, including clear height under beams or services;
  • the largest vehicles or parts to be painted;
  • whether the booth should be drive-through or single-entry;
  • which equipment is wanted and what already exists, such as controls or ducting;
  • timing and location.

Everything beyond that, such as connections, exhaust routing or building works, is better handled in a call or a site visit. The configurator just means that conversation does not start with the basics.

What does it change for makers and dealers?

We do not promise figures. But some conversations get shorter. The bay question has been asked: bay length, width and clear height arrive with the enquiry rather than in a call-back. The booth type has been explained: the animated air path shows how air moves through the booth, which gives the advice that follows a shared vocabulary. Options that do not fit the chosen booth never appear. And if you sell through dealers, each dealer can use the same configurator and receive the same details.

Example: our spray booth planner

The spray booth planner is an example configurator by Modelwright with a fictional product. Sizes, rules and the air path are simplified examples: not a design, not a permit and not a quote [1]. It shows five booth models by airflow type, booth length, a vehicle size class in the work area, a check of bay length, width and clear height, options with availability rules, a galvanised or powder-coat finish, cut-away, closed and plan views with a door toggle and size labels in feet or millimetres, and the animated air path. It ends with enquiry text to copy and a PDF.

Example configurator · fictional product

Spray booth planner

Plan a spray booth: five airflow types, length, vehicle size, a bay fit check, options with availability rules and an animated air path – with a PDF enquiry.

Prefab process cells · Dimensions and sizes · Materials and finishes · Options, modules and accessories

The rules that can sit behind airflow, length and the bay check are covered in spray booth configurator rules: airflow, length and bay fit.

How would it be built for your range?

We build it with your series and lengths, your airflow types, your options with the rules that today live in your sales team's heads or a price list, your finishes and your enquiry route. Whether the enquiry goes to you or to the dealer for the region is your decision. Photos, drawings and dimension tables are usually enough; we use CAD when it suits the web.

How the enquiry becomes a quote is covered in configurators for stores, booths and enclosures: from enquiry to quote, and the project in custom 3D configurator development.

Frequently asked questions

Does the configurator size the ventilation?

No. It shows booth types and the air path to explain them. Engineering, fire and explosion protection and permits stay with the manufacturer, the operator and the authorities.

Can buyers enter their own vehicle?

In the demo they pick a vehicle size class. In a project you can add classes or allow free dimensions.

Which language is the demo in?

English, with a feet or millimetre switch. In a project we set up the languages and units you need.

Sources

  1. Modelwright library, spray booth planner, "Live in this demo" list, read 14 November 2026: modelwright.de/en/library/spray-booth-configurator/

Read next