Technology

Van conversion layout: kitchen, washroom and the space check in a configurator

How a camper van configurator plans a conversion: layout zones, free length per side, kitchen and washroom with a space check, example rules and total.

Short answer: a camper van configurator plans the conversion along the length of the van: the cab at the front, a bed or lounge at the rear, and in between the living area with the kitchen block on one side and the washroom on the other. A space check works out the free length per side, disables what does not fit and, after a change, adjusts the smallest option needed. Our example configurator shows this with example values of a fictional converter; your real sizes and rules later sit in one data file.

Camper van conversion configurator – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

In which order does the configurator ask?

Whatever sets the space for everything else comes first. The demo has eight steps:

StepChoices in the exampleLimits later
1 Layoutlength 6.0 or 6.4 m, base van colour, rear cross bed, rear single beds or rear lounge; day or nightfree length for kitchen and washroom, rear garage
2 Kitchenblock S, M or L, driver side or sliding-door side, fridge, hobwashroom, battery
3 Washroomnone, toilet room or compact shower room–
4 Storageoverhead lockers none, driver side or all round; open rear garage or two pull-outs–
5 Finishesthree colours each for furniture, worktop and upholstery–
6 Equipmentswivel bases, roof window, roof vent, 0 to 2 solar panels, battery 100, 200 or 300 Ah (example values), awning–
7 Summaryevery option with its example price, notes and rules–
8 Enquirycontact fields, enquiry text, PDF–

How is the layout built?

The layout is not a stored picture. It is built from zones along the length of the van; all sizes are example values:

  • Cab: 2.30 m from the front bumper to the B-pillar. The living area starts behind it.
  • Rear zone: cross bed 1.45 m long (bed 1.90 × 1.40 m), single beds 1.95 m (2 × 1.90 × 0.75 m), rear lounge 1.95 m (a 1.90 × 1.80 m bed at night).
  • Sliding-door side: the free space starts after the 1.15 m door opening.
  • Driver side: the free space starts after the 0.85 m bench behind the driver seat; the rear-lounge layout has no such bench, so the space starts right behind the cab.

The demo shows what is left in between for both sides in its "Space check" box. The example values give these free lengths:

Length and layoutfree, driver sidefree, sliding-door side
6.0 m, cross bed1.33 m0.99 m
6.0 m, rear lounge1.63 m0.49 m
6.4 m, cross bed1.73 m1.39 m
6.4 m, single beds1.23 m0.89 m
6.4 m, rear lounge2.03 m0.89 m

In the example, single beds come with the 6.4 m van only. The advantage of zones: when the length or bed changes, the cut-away, top view, space check and PDF are recalculated at once. The demo gives the standing height as an example value of about 1.94 m.

How does the space check work?

In the example the kitchen block is 0.90 m (S), 1.15 m (M) or 1.40 m (L) long and stands on the chosen side. The washroom is always opposite: toilet room 0.70 m, compact shower room 0.85 m. Without a washroom the demo places a 0.50 m wardrobe where it fits. The check compares these lengths with the free length of each side.

Options that do not fit stay visible but are disabled and give the reason with a size, such as "does not fit, 0.89 m free" for the kitchen on the sliding-door side of the 6.4 m van with single beds. In the example this produces limits a buyer would otherwise only hear about in conversation: in the 6.0 m van with a cross bed only kitchen S fits on the sliding-door side; in the 6.4 m van with a cross bed kitchen L fits on the driver side only, because the sliding-door side is just too short at 1.39 m.

When a later change makes an earlier choice invalid, the demo looks for the smallest change that fits again: first a shorter kitchen block or a smaller washroom, only then a change of side. A short note says what was adjusted. Three examples from the code:

  • Default set-up 6.0 m with cross bed, kitchen M on the driver side, toilet room. Switch to rear lounge: 0.49 m is left on the sliding-door side, so the washroom goes ("Adjusted so that everything fits: washroom: No washroom.").
  • 6.4 m with cross bed, kitchen L with the 90 l fridge and shower room, then switch to 6.0 m: the kitchen becomes M and the 90 l fridge becomes the 70 l fridge, both in one note.
  • Default set-up, kitchen moved to the sliding-door side: only S fits there, so the kitchen becomes S and the fridge becomes the fridge drawer.

Which rules apply to bed, kitchen and storage?

Besides the space check, the demo has a few example rules of a fictional converter:

  • Single beds only with 6.4 m. Switching to 6.0 m with single beds selects the cross bed, with a note.
  • 70 l fridge from kitchen M, 90 l with kitchen L only; the 50 l fridge drawer fits every block.
  • An induction hob needs at least 200 Ah. Choosing induction at 100 Ah sets 200 Ah with a note, and 100 Ah is then disabled.
  • Rear garage or pull-outs with a fixed bed only; with the rear lounge both options are disabled.

How the rules behave matters: disabled options stay visible and say why. Automatic changes are always announced. That way no enquiry arrives for a combination your rules exclude, and nobody wonders why something changed. Whether a rule is technically needed is for the converter to decide; the demo makes no statement on registration, weight, payload, gas or electrical inspection.

What does the demo show for power and roof?

Solar panels (0, 1 or 2) and the leisure battery (100, 200 or 300 Ah) are equipment options with example values and no output figures; the converter plans and fits the system. The camera shows each change where it happens: solar panels, roof window and roof vent on the roof, the battery in the opened seat box, the fridge opened, the washroom with its door open, the rear garage with the rear doors open.

How is the example total calculated?

The running total adds up lines with example prices of a fictional converter; it is not a quotation and not a Modelwright price. Each option has its own line, and some depend on the length: the base price of the converted van and the awning. Bed size, standing height and battery size appear in the summary as example values. In the default set-up the total of example prices of a fictional converter comes to €72,810. The display, summary, enquiry text and PDF use the same calculation, so they always show the same total.

The enquiry asks for name and email, with company, phone and message optional. The PDF contains the cut-away by day and by night, the outside view, the summary with every line and the notes. The demo sends nothing; text and PDF are created in the browser.

Example configurator · fictional product

Camper van conversion configurator

Plan a camper van conversion in a cut-away view: bed and layout, kitchen, washroom, storage, finishes and equipment, with a day-and-night conversion and a camera that moves inside the van for every change.

Vehicles & trailers with interior · Dimensions and sizes · Options, modules and accessories · Materials and finishes

What does your data replace?

For your range, your base vans and lengths, rear zones, kitchen blocks, washrooms, finishes, rules and prices replace the example values. They live in one data file; the program logic for the cut-away, space check, summary and PDF stays. How trailers and vehicle bodies with interiors are built, from data to loading time, is covered in Building a 3D configurator for trailers and vehicle bodies. The sales view is in Camper van configurator for van converters, the project process on 3D configurator development.

Send us your layouts, furniture sizes and rules – you get a proposal for the flow and a fixed-price quote.

Frequently asked questions

Where do rules like "induction from 200 Ah" come from?

They are example rules of a fictional converter. Your configurator uses your own rules; what applies technically and legally is for you as the converter to settle with the responsible bodies.

Does the space check work with other lengths?

Yes. The check calculates with the lengths in the data file: cab, door opening, bench, rear zone, kitchen block and washroom. When another van length or bed is added, the free lengths follow from those values.

Does the flow work without prices?

Yes. Steps, space check, rules, day and night mode and the enquiry work without a total. Prices are a separate layer that you can show or leave out.

Sources

  1. Demo features: "Live in this demo" list and note on the camper van conversion configurator library page, read 18 November 2026: modelwright.de/en/library/camper-van-configurator/
  2. Zones, space check, rules, price structure and default set-up: demo source code (data.js: BODY, LENGTHS, DOOR, BENCH, REAR, KLEN, WETLEN, FRIDGE_MIN, INDUCT_MIN_AH, RULES, PRICE; app.js: lay, fitOf, norm, disabled, priceLines) and schema notes; test results: QA log of 17 and 18 November 2026 with an independent review round (emulated devices only).

Read next