Characteristic, value, option
A characteristic describes one property of the product, such as width, colour or drive. In SAP, characteristics describe the properties of a configurable material [1]. When its possible values are a fixed list, web configurators usually call them options: a list, tiles or swatches.
Parameters
A parameter is a characteristic with a range instead of a list: width from 3,000 to 7,000 mm, 10 to 18 steps. It needs three things:
| Item | Example |
|---|---|
| Limits | 3,000 to 7,000 mm |
| Step | 10 mm |
| Unit | mm internally, shown in metres or feet and inches |
Parameters make a product flexible, but the 3D model then has to be generated from rules rather than picked from finished variants. That is why the effort behind a configurator often depends more on its parameters than on the number of options.
Why the difference matters
- Rules: options can be locked; parameters need limits that may shift each other.
- Data: options often carry part numbers; parameters feed calculations such as cutting lengths or quantities.
- Controls: a number field with plus and minus is more precise on a phone than a slider.
- Enquiry: dimensions should appear in the buyer's unit. The canopy example switches the display between metres and feet and inches while the value stays in millimetres internally (example configurator, fictional product).
Configurators range from picking a few simple properties to systems that generate drawings and parts lists automatically [2]. Where your product sits decides the scope; see 3D configurators for manufacturers.