Fixed geometry or rules
There are two ways to show variants in 3D:
- Fixed models: each variant or part exists as a finished mesh and is shown or hidden. Good for a few clearly separate options.
- Parametric models: the geometry is calculated from values. Good when dimensions are free or come in fine steps, as with stairs, halls, fences or shelving.
In engineering the principle is familiar from CAD systems with dimensions and constraints, or from tools such as Grasshopper, a graphical algorithm editor for Rhino [1]. In the browser, program code takes on this role.
What it looks like in a configurator
A parametric configurator links three layers:
- Parameters: the values visitors choose or enter.
- Rules: what follows from them, such as the number of steps from floor height, post spacing from length, or permitted combinations.
- Geometry: the model rebuilt from the result.
Repeated parts such as treads, posts or louvres are often drawn with instancing: one mesh, many positions [2].
Example
The spiral stair configurator (example configurator, fictional product, example values) calculates the number of treads from floor height, tread angle and diameter, then rebuilds treads, balusters and centre column from the result. Its check values are examples, not proof of compliance.
Limits
Parametric models take more effort to build than fixed ones, and every rule has to be agreed with the manufacturer. A web configurator does not calculate structural safety, standards or approvals; that remains the manufacturer's responsibility. The pillar page 3D configurator shows how rules and geometry come together in a project.