Glossary · Configurators

Configuration rules (rule engine)

In short

Configuration rules (also called constraints or a rule engine) decide which options are valid together: dependencies, exclusions, size limits and calculations. They make sure a configurator only allows variants that can actually be built.

What a rule is

A configuration rule links a condition to a consequence. Common forms:

  • Dependency: option B is only available with option A.
  • Exclusion: drive C does not fit widths B1 and B2.
  • Size limit: width between 3.00 and 7.00 m in 10 cm steps.
  • Calculation: a value follows from others, such as an area, a quantity or a volume.
  • Default: choosing X sets Y automatically.

Without rules, the number of combinations multiplies. Wikipedia uses the example of a truck maker: the chosen chassis limits the possible engines, the engine in turn limits the trailers, and with many options the problem becomes a combinatorial explosion [1].

Where rules live

In ERP systems rules are often called dependencies. In SAP they exclude impossible combinations and select the matching components and operations [2]. In a web configurator they are best held as data rather than scattered through the code, so they can be tested and maintained by people who know the product. Keep one authoritative source: rules kept in two places drift apart.

How a rule shows itself

A good configurator does not silently grey out an option; it says why. In the chemical store example the sliding door is locked with a hint outside the permitted layout, and the container counters stop at the free places. Fictional product, example rules.

Writing rules down

Write each rule as one line: condition, consequence, message to the user. That table doubles as specification and test plan. Which rule applies to a real product is the manufacturer's decision; the configurator only implements it, see manufacturer responsibility. A worked example for a spiral staircase is in spiral staircase configurator rules.

Related terms

  • Compatibility check (fit check)

    A compatibility check (in building products often a fit check) compares a configuration with constraints – available space, connection sizes, matching accessories – and reports whether everything fits. A good check states the reason and suggests a fix.

  • Parameter, characteristic and option

    An option is a fixed choice (anthracite, drive A); a parameter is a value the user sets within limits (width 3,000 to 7,000 mm). Both are values of a characteristic, the basic building block of any product configuration.

  • Variant configurator

    A variant configurator only assembles product variants that can actually be built, using characteristics and rules. In German usage the term is often a synonym for product configurator; inside ERP, rules select the matching components and operations.

  • Bill of materials (BOM)

    A bill of materials (BOM) is the structured list of raw materials, assemblies, parts and quantities needed to make a product. A configurator can derive it from the chosen variant.

  • Manufacturer responsibility

    Manufacturer responsibility, in a configurator, means that whether a product is safe, structurally sound and compliant is decided and answered for by the manufacturer. The configurator only implements the rules and limits the manufacturer supplies; it does not test or certify anything itself.

Examples to try

Example configurator · fictional product

Chemical & hazmat store configurator

Plan a steel chemical store: choose front access or walk-in, modules, storage system and door type, place IBCs and drums – with a live sump readout against an example rule, a fill animation, forklift loading and a PDF enquiry.

Prefab process cells · Dimensions and sizes · Colours · Materials and finishes

Example configurator · fictional product

Sectional & roller door configurator

Plan an industrial or garage door: enter headroom and side room and see in the building section at once whether tracks, barrel or head box fit.

Doors & openings · Dimensions and sizes · Options, modules and accessories · Materials and finishes

More in our guides

Sources

  1. Wikipedia: Configure, price and quote
  2. SAP Help Portal: Variant Configuration (LO-VC)

← All terms in the glossary