Why modules
A modular system reconciles two goals that usually conflict: wide choice for the buyer and few parts in production. That is the core of mass customisation, which combines the low unit costs of mass production with individual customisation [1]. When modules are put together only after the order, it follows the assemble-to-order principle [2].
What a modular system means for a configurator
| Property of the system | Effect in the configurator |
|---|---|
| fixed grid dimensions | parameters move in module steps, not continuously |
| defined interfaces | rules such as "may module A sit next to module B?" |
| end and connector parts | follow automatically, e.g. end panels or connectors |
| parts per module | the BOM follows by counting |
Because the 3D model consists of recurring parts, it can be built from rules: the configurator places modules instead of loading a separate model for every variant. Configuration systems guide users through the variants, show the result and pass the choice to production [3].
Examples from the library
- Modular shelving configurator: bays in fixed widths (60, 80, 100 cm), fronts per bay, with rules, variant count and parts list on show.
- Sofa configurator: one to four seat modules, straight, with chaise, L- or U-shaped.
- Dock kit configurator: a kit dock with a parts list of indicative quantities.
All are example configurators with fictional products and example values.
What to watch
- Collect invalid neighbours early: which modules may not sit side by side?
- Show the limits of the system openly: whatever is off-grid becomes an enquiry.
- Load capacity and assembly are the manufacturer's responsibility; the configurator only implements their rules, see manufacturer responsibility.