Industries & use cases

Acoustic enclosure configurator software for machine enclosure manufacturers

What a 3D configurator for acoustic machine enclosures needs: panel grid, doors, vents, pass-throughs, a service access check and crane access.

Short answer: for makers of acoustic enclosures, acoustic panel systems and machine housings, a configurator is worth building when it answers the question that can undo an enclosure once installed: can maintenance still reach the machine? It places the enclosure around a machine on your panel grid, sets doors, vision panels, vents and pass-throughs, checks service sides, head height and crane access, and sends an enquiry with the machine size and a panel plan.

This guide is for managing directors, sales and product managers at makers of acoustic enclosures, machine enclosures, compressor and generator canopies and test-bench booths. Their enquiries come from production and maintenance managers, health and safety staff, or machine builders who want their own machine enclosed. They know the machine well and your panel system not at all, so the sale usually starts with the machine: size, operating side, where it is serviced, whether a crane has to lift parts, and where cables and pipes enter.

Acoustic machine enclosure configurator – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

What makes machine enclosures different?

  • The machine sets the size. Footprint and height follow from machine size, clearance and panel grid.
  • Every panel can have a job. Acoustic panel, vision panel, door, vent with silencer or pass-through: the buyer decides field by field.
  • Service access is the real risk. An enclosure that blocks a service side is a defect nobody sees in the quote.
  • The roof is more than a lid. Removable panels, a crane hatch or a roof fan decide whether the machine can be swapped later.

Behind this sits occupational noise protection. In Germany, section 7 of the Noise and Vibration Occupational Safety and Health Ordinance (LärmVibrationsArbSchV) names enclosures as an example of technical measures to reduce airborne noise [1]. Which measure a site needs, and what a given enclosure achieves, is for the operator and the manufacturer to assess. A configurator does not calculate acoustic performance. It can carry the buyer's target value into the enquiry and enforce the rules you set for your system.

Which features does it need?

FeatureWhyIn our example configurator
Machine and clearanceDerive the size from the machineYes, four stylised machines with example sizes
Panel grid and extra panelsSizes you can supplyYes, 1,000 or 1,200 mm; the enclosure snaps to the grid
Panel height with head-height checkRoom above the machineYes
Tap a panel: window, door, vent, pass-throughBuild the panel planYes, in 3D and on the plan
Service check with service zonesSettle access before quotingYes, green, amber or red
Roof: removable, crane hatch, roof fanCrane access and machine removalYes
Exploded view and assembly sequenceExplain the buildYes, animated
Cut-away viewShow the machine insideYes
Acoustic ratings, ventilation sizing, staticsEngineeringNo, the manufacturer's job

What does it change?

We do not promise figures. The work it saves is easy to name:

  • Machine details arrive with the enquiry. Machine and size, panel plan, ventilation and crane access are in the first message rather than three later e-mails.
  • Service conflicts show up first. With no door in front of a service side and too little room inside, the check turns red.
  • The panel plan is sketched. Your engineers check and correct it instead of starting from a blank sheet.
  • The build is explained. The exploded view and assembly sequence show posts, rails, panels and roof to buyers without an engineering background.

Example: our acoustic machine enclosure configurator

The acoustic machine enclosure configurator is an example configurator by Modelwright with a fictional product and sample values, with no statement on acoustic ratings, statics or standards [2]. It offers a screw compressor, a press, a generator set and a machining centre, each stylised with example sizes. The enclosure snaps to the panel grid, and any panel can be tapped in 3D or on the plan and changed. The service check draws service zones on the floor, swings the doors open and warns when a service side is blocked. There is also an exploded view with an animated assembly sequence, a cut-away, removable roof panels with lifting eyes, a crane hatch, a roof fan with silencer, and colours for panels, frame and doors. Buyers can state a desired noise reduction as a target; the demo labels it as not a promise.

What we checked (emulated, not on real phones): an independent review ran the demo on seven screen sizes without errors, found all 19 summary rows word for word in the enquiry text, and confirmed that the PDF carries a three-quarter view and a top view with service zones.

Example configurator · fictional product

Acoustic machine enclosure configurator

Plan an acoustic enclosure around a machine: pick the machine and clearance, tap panels to turn them into doors, windows, vents or pass-throughs, set the roof and crane access – with an exploded view, assembly sequence, service check and a PDF enquiry.

Industrial cells & machines · Dimensions and sizes · Colours · Materials and finishes

How the grid, service zones and example rules fit together is covered in machine enclosure configurator rules: grid, service access, checks.

How would it be built for your system?

We build it on your panel system: grid sizes and heights, your panel types with doors, windows, silencers and pass-throughs, your minimum clearances and rules, your roof variants and colours. Instead of stylised machines, buyers can enter their own machine size and service sides, or you can set up typical machine classes. Photos, drawings and dimension tables are usually enough; we use CAD when it suits the web.

Who receives the enquiry is covered in configurators for stores, booths and enclosures: from enquiry to quote. For machinery more broadly, see 3D configurators for manufacturers, and for the project itself custom 3D configurator development.

Frequently asked questions

Does the configurator calculate sound insulation?

No. It records the buyer's target in the enquiry. What an enclosure actually achieves is for you as the manufacturer to state.

Can buyers enter their own machine?

In the demo they pick one of four example machines. In a project they can enter the size and service sides of their own machine, and the checks use those values.

Can it be used on a tablet on the shop floor?

Yes, in the browser with no app. We tested seven emulated screen sizes, not real devices.

Sources

  1. Federal Ministry of Justice (Germany): section 7 LärmVibrationsArbSchV, measures to avoid and reduce noise exposure, read 14 November 2026: https://www.gesetze-im-internet.de/l_rmvibrationsarbschv/__7.html
  2. Modelwright library, acoustic machine enclosure configurator, "Live in this demo" list, read 14 November 2026: modelwright.de/en/library/acoustic-machine-enclosure-configurator/

Read next