Balcony configurator for manufacturers: plan whole facades, show the installation, receive complete enquiries
What a 3D balcony configurator can do for makers of bolt-on, stacked and hung balconies: facade planning, assembly views and project enquiries.
Short answer: for a balcony manufacturer, a configurator is less a product picker and more a facade planning tool. Housing providers, developers and architects decide which balcony type goes on which position, see railings, decking and colour on the building, and send an enquiry that lists the layout per storey, the sizes and the fit-out. Structural design, fixings and approvals stay with the manufacturer.
This guide is for managing directors, sales and marketing leads at manufacturers of bolt-on, post-supported and hung balconies, balcony railings and Juliet balconies. The worked example is our bolt-on balcony configurator: an example configurator with a fictional product, an example facade and example values.
Why is a balcony configurator different from most product configurators?
Because the sale is a project, not a unit. Retrofit and new-build balconies on apartment buildings are planned for a whole elevation: many positions, often several types on one facade, and decision-makers who will never stand on the balcony themselves. A typical shop configurator, one product with options, does not fit that buying process.
A balcony configurator therefore needs a building as its canvas. Our example starts with an apartment facade you can size from one to five upper storeys and two to five window axes, retrofit or new build. Balconies are then placed onto it, position by position or in bulk. A Juliet balcony, a railing in front of a full-height window with no or almost no projection [1], is one more state a position can take.
For contrast, a spiral stair is sold one at a time from two site measurements; see staircase configurators for spiral stair manufacturers.
Who is involved, and what do they need to see?
| Stakeholder | Question | What the configurator can show |
|---|---|---|
| Housing provider or landlord (retrofit) | What will the building look like, and which options are there? | The whole facade in 3D, types and railings side by side |
| Developer (new build) | Which type suits which axis? | A layout per position, storey or stack |
| Architect | Sizes, views and a summary for the drawings | Dimension lines, facade and side view, PDF |
| Residents and their representatives | How much daylight will the flat below lose? | A shadow check as an example calculation |
The last row matters most in retrofits of occupied buildings. In the example, a depth slider moves the shadow line on the window below, for summer, spring and autumn, and winter sun at noon. It is an example calculation, not a daylight study.
What should a balcony configurator include?
- Apply to the facade: pick a balcony type, then tap one position, a whole storey, a whole stack or the whole facade, in the 3D view or in a facade grid.
- Types with their own logic: bolt-on cantilevered on brackets, hung with tie rods, post-supported stacks, Juliet balconies. In the example, post stacks are kept continuous down to the ground automatically.
- Range limits: example width and depth limits per type, a red check when they are exceeded, and a one-click suggestion of a type that fits.
- Fit-out: five railing types, railing height, RAL colours, decking, open or closed soffit with lights, side privacy screens, spouts or downpipes.
- Views: angle, facade, side and balcony camera presets, a scale figure and dimension lines.
- Enquiry: a review with checks, enquiry text to copy and a PDF with a facade view and a side view.
How the grid, the type rules and the shadow calculation work is explained in balcony configurator logic for facades.
Showing the installation
If your balconies arrive prefabricated and are lifted into place, you have a selling point that is hard to put into words. In the example, each balcony you place hangs from a crane hook on slings, is lowered in front of the facade and slides in; "show assembly" replays the whole facade. For an owner deciding on a retrofit of an occupied building, that sequence may explain more than a page of text. In a project we would animate your actual installation sequence, not our example one.
What the configurator does not do
Balconies and railings are safety-relevant. The configurator makes no statement about structural design, load capacity, fall protection or standards. The limits per type are the limits of a fictional range; the railing heights are choices, not requirements. Loads, anchoring and the connection to the facade are designed and checked by the manufacturer with the structural engineer, and the rules that apply are established by the manufacturer and the design team for each building. The example says so in its own checks: "Statics and fixing by the manufacturer".
Where it fits in project sales
For apartment balconies, the configurator's job is the first conversation and early design: it produces an enquiry that names the building, the layout, the sizes and the fit-out, and a PDF an architect or owner can circulate internally. Site survey, structural design and the quotation follow as they do today. Which of those steps the demo covers, and what a project would add, such as handing enquiries to a CRM, is covered in enquiries and site surveys for stairs and balconies. Scope and budget are covered in what a stair or balcony configurator costs.
The example configurator
The bolt-on balcony configurator runs in English and German. It is Modelwright's own demo: the facade, the product and every value are fictional. For how we would build one for your range, see custom 3D configurator development.
Common questions
Does the configurator do the structural calculation?
No. It checks sizes against limits the manufacturer sets. Structural design, fixings and approvals are planned by the manufacturer with the structural engineer.
Can buyers upload their own facade?
Not in the demo, which uses an example facade with adjustable storeys and axes. Whether a project should take photos or drawings of the building is assessed case by case.
Sources
- Wikipedia (German): Balkon, definition of the French (Juliet) balcony (read 14 November 2026): de.wikipedia.org/wiki/Balkon
- Demo features: the "Live in this demo" list on the library page (read 14 November 2026): /en/library/bolt-on-balcony-configurator/


