Technology

Balcony configurator logic for facades: grid, type rules, shadow check and enquiry

How a balcony configurator models a facade as a grid, keeps post stacks continuous, checks size limits, calculates shade and builds the enquiry.

Short answer: a balcony configurator's logic starts with the facade, not the balcony. The facade becomes a grid of storeys and axes, and every cell holds one balcony type. Rules keep the layout consistent, for example by keeping post-supported stacks continuous, and check width and depth against each type's range. Fit-out applies to the whole facade, a shadow calculation shows what depth does to the storey below, and the enquiry carries the layout storey by storey.

This guide uses our bolt-on balcony configurator as the worked example. It is an example configurator: the product, the facade, the limits and the shade values are fictional example values, not manufacturer data and not a structural statement. The business case is covered in balcony configurators for manufacturers.

Bolt-on balcony configurator – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

How does the configurator represent a facade?

As a grid. You choose the project type (retrofit or new build), then one to five upper storeys and two to five window axes. Each cell, one storey on one axis, has exactly one state: bolt-on, hung, post-supported, Juliet, or none. The configurator adds a ground floor with an entrance, and the axis spacing follows the balcony width.

That grid is the data model for everything else. The 3D view, the checks, the summary and the PDF all read the same layout. Change the facade, for example from four storeys to three, and the configurator adjusts the layout and tells you it has done so.

How are balconies placed?

With a brush: pick a type, then the scope it applies to.

ScopeEffect
One positiononly the cell you tap
Whole storeyevery axis on that storey
Whole stackevery storey on that axis
Whole facadeevery cell

You tap either the facade in the 3D model or a facade grid next to it. The grid is the more precise input on a small screen; the 3D view shows what you have built. Every new balcony is lowered into place by the crane animation.

Which rules apply to each type?

Post stacks stay continuous

In the example, post-supported balconies form a stack down to the ground. So setting a cell to "posts" also sets every storey below it on that axis, with a message. The other way round, changing a cell beneath a post stack to another type switches the balconies above it to "hung", again with a message. The layout can never contain a post-supported balcony standing on nothing.

It is a good example of a dependency a form cannot express: the rule is not about one option but about neighbouring cells.

Width and depth limits

Width is set with steppers or typed in; depth with a slider from 0.80 to 2.50 m. Each type has its own example range. If a placed balcony falls outside its type's range, the check turns red and the configurator suggests a type that covers the size; one click applies it.

Type (example)DepthWidth
Bolt-on on brackets0.80 to 2.00 m2.00 to 4.50 m
Hung with tie rods0.80 to 2.20 m2.00 to 5.00 m
Post-supported0.80 to 2.50 m2.00 to 5.00 m
Juliet balconyno platform–

Limits of a fictional range, not a structural rating. The sizes a real balcony type allows are set by the manufacturer with the structural engineer; the configurator only applies them.

How does the shadow check work?

The deeper the balcony, the more light it takes from the window below. The demo calculates this as an example for a south-facing facade at noon, at about 51° north. The sun's height at noon follows from latitude and the sun's declination [1], and the declination moves between about +23.44° and −23.44° over the year [2]. That gives the example three sun heights: 62° in summer, 39° in spring and autumn, 15° in winter.

On the facade, the shadow drops depth × tan(sun height) below the underside of the balcony. The demo shows how much of that falls on the window below as a share of the window height, with the same sun angle in the 3D view and a shadow line drawn on the window. A separate check says whether the low winter sun still reaches the window below.

This is an example calculation for a design question, not a daylight study. For your range, orientation and latitude could become inputs; whether they should is a sales question as much as a technical one.

What applies to every balcony?

In the example, fit-out is chosen once for the facade: railing (frameless glass, glass with handrail, vertical bars, perforated metal, mesh), one of two railing heights, a RAL colour for frame and railing, decking (aluminium, composite or timber look), soffit (open, panel, panel with lights), privacy screens left, right or both, and drainage by spout or downpipe. Privacy screens apply only to balconies with a platform. Colours on screen are approximations.

If your projects need fit-out per balcony, say a different railing on one storey, that is a data-model decision: every per-cell option multiplies the number of states and the length of the enquiry.

What goes into the enquiry?

The example's review lists project type, storeys, axes, number of balconies with a platform, number of Juliet balconies, types, width, depth, total platform area, railing, railing height, colour, decking, soffit, privacy screen, drainage, shade on the window below with the sun position, and the layout per storey. The checks follow, then fields for name, company, email, phone, project or location, and a note.

The text can be copied, and the PDF adds a facade view and a side view with the shadow. In the demo nothing is sent or stored; text and PDF are created in the browser. In a project, the enquiry would reach your sales team by email or webhook. What happens next is covered in enquiries and site surveys for stairs and balconies.

What we need from you

  • Your balcony types with size ranges, and your sign-off on those ranges
  • Dependencies between positions, such as posts or tie rods
  • Railings, decking, colours and accessories, with exclusions
  • Whether fit-out is chosen per facade or per balcony
  • The fields your sales team needs in every enquiry

For how we work, see custom 3D configurator development; for the technical side, building a 3D configurator for stairs and balconies.

Sources

  1. Wikipedia: Solar zenith angle, formula at solar noon (read 14 November 2026): en.wikipedia.org/wiki/Solar_zenith_angle
  2. Wikipedia: Position of the Sun, declination (read 14 November 2026): en.wikipedia.org/wiki/Position_of_the_Sun
  3. Demo features: library page and the demo itself (read 14 November 2026): /en/library/bolt-on-balcony-configurator/

Read next