Industries & use cases

Boat configurator for boat builders and dealers: features, benefits, build

What a 3D boat configurator for small powerboats needs: length, helm layout, colours, equipment, engine, trailer, option rules and a PDF enquiry.

Short answer: a boat configurator earns its place at builders and dealers of small powerboats who sell their boats as a package: hull and helm layout, colours, deck and cushions, shade, electronics, fishing gear, engine and trailer. The buyer puts the boat together on a 3D model, rules block combinations you do not offer, and it ends in an enquiry with a complete equipment list and images. It does not replace the sea trial or the sales conversation.

Boat configurator – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

Who is a boat configurator for?

This guide is for managing directors, sales and product leads at builders of small powerboats of roughly 5 to 7 metres: centre and side consoles, open day boats and small cabin boats, in GRP or aluminium. It is also for dealers who sell these boats as a package with engine and trailer, and for suppliers of equipment such as T-tops, upholstery and decking.

If you sell a boat like this as a package, the buyer makes a string of choices: first a length and a helm layout, then colours, decking, seats, top, display, rod holders and engine, plus a road trailer where one is offered. Each choice changes how the boat looks, and some of them depend on each other.

What makes boats different from other configurable products?

  • The package is the product. Hull, equipment, engine and trailer are enquired about together. If one of them is missing from the enquiry, you have to ask.
  • The helm layout decides the options. Whether a hard top, a large display or rod holders up high are possible can depend on the deck layout. The configurator should know that, not the buyer.
  • Not every engine suits every hull. Which engines are approved for which hull is the builder's decision. A configurator turns that into a rule instead of a footnote.
  • On land, the rig counts. Anyone who wants to store the boat on its trailer needs the height of boat and trailer. That depends on the superstructure, for example the top over the helm.

Without a configurator, these points come up in a conversation, on the phone or at the boat show. A configurator asks them in a fixed order before the enquiry reaches you.

Which features does it need, and what does our example show?

FeatureWhyIn the example configurator
Model and helm layoutstart from the rangeyes: three lengths (5.5, 6.2 and 6.9 m); centre console, side console or small cabin
Hull and colourrecognitionyes: six hull colours including natural aluminium, four stripe options, five stripe colours
Deck and seatingshow the equipmentyes: four deck finishes, four cushion colours, bow cushions, leaning post or helm seat, folding rear bench
Top, electronics, fishingsell accessoriesyes: T-top or bimini, chart plotter display 7, 9, 12 or 16 inch, rod holders, swim ladder
Engine and trailercomplete the packageyes: fictional unbranded outboard in four size classes and three colours; road trailer
Option rulesonly enquire about what you offeryes: options that do not fit are disabled, automatic switches come with a short note
Clearance heightthe storage questionyes: height of boat and trailer from the 3D model against an entered clearance
Summary, enquiry text, PDFan enquiry without gapsyes: equipment list, example checks, copyable text, PDF with two views
Your pricesprice frameno, in the project

What does it bring?

  • Show the boat online without a boat at the dock. Buyers see their combination even when that exact version is not in the marina or at the dealer.
  • One configuration for builder, dealers and boat-show stand. Everyone works from the same options and the same rules.
  • Enquiries with a complete equipment list. Every enquiry lists length, helm layout, colours, equipment, engine class and trailer in the same order, with images.
  • Only combinations you offer. What your rules exclude cannot be selected in the configurator.

Example: our boat configurator

The boat configurator is an example configurator by Modelwright with a fictional product, a console boat. All sizes, options and rules are example values; the horsepower figures of the four engine classes are only example labels of a fictional outboard. The demo shows no prices and makes no statement on speed, fuel use, load, number of people, design category or safety; the manufacturer decides those.

The default is a 6.2 m boat with a 2.35 m beam: centre console, white hull, navy pinstripe, teak-look deck, sand cushions, T-top, 12-inch display, four rod holders in the gunwale, swim ladder and a class L outboard. The hull is rebuilt from parameters for each length: a V bottom with a hard chine, two spray rails per side and a rub rail along the sheer.

Seven steps lead from model through hull, deck, equipment and engine to the review and the enquiry. Every choice brings the changed part into view; for many options a short label at the part names the change. Switch on the trailer in the engine step and the boat stands on land on its trailer with the outboard tilted up. "Launch" then shows, in about seven seconds, the trailer reversing down the slipway, the boat floating off and the empty trailer driving back up; "Retrieve" plays it in reverse. On a showroom screen or a boat-show stand, the animation shows the boat where it belongs: in the water.

The demo ends with a summary with example checks, a copyable enquiry text and a PDF with two views. It does not send the enquiry; text and PDF are created in the browser only. In a project, the enquiry goes by email or webhook to your sales team or to the right dealer.

Tested: on 17 November 2026 an independent QA round clicked through every control of the steps on version 7 of the demo, apart from the enquiry fields and choices, in German and English, directly and embedded, on an emulated 1440 px desktop and an emulated 393 px phone: 528 of 528 control results showed a visible effect. The builder fixed the two defects found in that round in version 8 and re-ran the direct test at both widths: 67 of 67 and 65 of 65 controls visible. All of it ran on emulated devices; real phones were not tested.

Example configurator · fictional product

Boat configurator

Put together a console boat: length, centre or side console or cabin, hull colour and stripe, deck, cushions, T-top or bimini, display, rod holders, outboard and trailer – with a launch animation, a clearance check and a PDF enquiry.

Docks & marine · Dimensions and sizes · Colours · Materials and finishes

Which option rules the demo applies and how the clearance check works is covered in Boat configurator: option rules, trailer and clearance check.

How is it built for your range?

For your yard, we build the configurator with your hulls and deck layouts, your colours, upholstery and decking, your equipment options, your engine pairings per model and your rules on what combines with what. Your hull lines can come from an offsets table or from existing 3D data, if it is suitable. Optionally, we add your pricing logic, dealer routing and your model codes in the enquiry.

How a configuration becomes a site visit, a dealer enquiry or a shop cart is covered in Dock configurator enquiries, using docks as the example, with the same questions for marine products. If you sell docks or berths, the manufacturer's view is in Aluminium dock configurator software. Budget and scope are covered in How much does a custom 3D product configurator cost?, the project process on 3D configurator development.

Send us your model list and your equipment options, and we will reply with a proposal and a fixed-price quote.

Frequently asked questions

Can the configurator handle our engine pairings?

Yes. The demo shows the principle with an example rule: the largest engine class starts at 6.2 m. On the 5.5 m length it is disabled, and switching to 5.5 m with class XL selected changes it to class L with a note. In a project, your pairing table per hull replaces that rule.

Can dealers use the same configurator?

Yes. The configurator runs as its own page or embedded in your website. Routing each enquiry to the right dealer is not part of the demo, but can be set up in a project.

Can it show prices?

The demo shows no prices. Pricing logic for model, equipment, engine and trailer can be added in a project if you want to show prices.

Sources

  1. Demo features: "Live in this demo" list and note on the boat configurator library page, read 18 November 2026: modelwright.de/en/library/boat-configurator/
  2. Options, rules and default set-up: demo source code (data.js, app.js) and schema notes; test results: log of the independent QA round of 17 November 2026 and the re-test after the fixes, emulated devices.

Read next