Industries & use cases

Bathroom planner for sanitary ware, bathroom furniture and tile makers: features, benefits, build

What a 3D bathroom planner needs for manufacturers: room size, presets, fixtures on the walls, tiles, clearance check, equipment list and enquiry.

Short answer: a bathroom planner earns its place at a maker of sanitary ware, bathroom furniture, showers or tiles when it starts from the buyer's room, not from the catalogue. The buyer sets the width and depth of the bathroom, picks a preset, puts the shower, bathtub, vanity and WC on the walls and sees in the 3D model whether there is enough free space in front of each fixture. It ends in an enquiry with a plan, check results and an equipment list. It does not replace professional planning on site.

Bathroom planner – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

Who is a bathroom planner for?

This guide is for managing directors, sales and product leads at makers of bathroom furniture and vanities, shower enclosures and walk-in showers, bathtubs and sanitary ware, and tiles, and at companies selling complete bathrooms and renovations. Their buyers are homeowners building or renovating a bathroom, and the installers who plan it for them.

A bathroom is planned as a room, not as a set of single products. Whether a 1.20 m vanity fits depends on where the shower goes, which way the door opens and how much space is left in front of the WC. A product photo cannot answer that. Someone planning a bathroom needs their own measurements in the picture.

What makes bathroom planning different?

  • The room sets the size. Width, depth, door and window are given. Every fixture has to go on a wall, and every wall has a fixed length.
  • Fixtures need space in front. The area in front of the WC, the vanity, the shower entry and the bathtub must stay free. A fixture can fit on its wall and still block the space in front of another one.
  • The door has a say. Nothing may stand where the door swings, and the open door leaf needs its own place against the wall.
  • Finishes are chosen in the room. Tile colour, format and tiling height only show their effect on the wall, and tap finishes next to the vanity and shower.

Without a planner these questions wait for the sales conversation or the site visit. A bathroom planner asks them earlier, in a fixed order: the room first, then shower and bathtub, then basin and WC, then the finishes.

Which features does it need, and what does our example show?

FeatureWhyIn the example configurator
Room size, door, windowstart from the roomyes: width 1.60–4.60 m, depth 1.60–4.00 m in 0.1 m steps; 80 cm door with the door swing drawn; window none, back, right or left wall
Presetsquick start, show bundlesyes: shower room, bath room, family bathroom, spa bathroom; a preset that needs more space says so on its button
Shower and bathtubshow the rangeyes: walk-in 1.20 / 1.40 / 1.60 × 0.90 m, corner shower 0.90 / 1.00 m; built-in or freestanding bathtub
Basin, WC, radiatorshow the rangeyes: vanity 0.60–1.40 m, double basin from 1.20 m, four fronts; mirror cabinet, mirror or none; wall-hung WC with in-wall frame; towel radiator
Fixtures placed on the wallsown layoutyes: choose the wall, move in 10 cm steps, snap to the wall, the corners and the next free spot
Tiles and fittingschoose finishes in the roomyes: wall tiles in six colours and four formats, half or full height; floor tiles in five colours and four formats; three fitting finishes
Clearance check with suggestionscatch layout mistakes before the visityes, live on the floor and with a one-click suggestion
Equipment list, enquiry text, PDFa complete enquiryyes: example equipment list with tile areas, text to copy, PDF with a 3/4 view and a plan
Your pricesprice guidanceno, in a project

What does it bring?

  • Enquiries that include the room. The enquiry carries the room size, each fixture's position on its wall, the window, the finishes and the clearance check result, plus a plan in the PDF.
  • Presets as bundles. A preset puts several products into the room at once. In a project these can be your bathroom series or complete-bathroom packages.
  • Problems become visible. A fixture with no room on any wall is disabled and says why; when a fixture blocks the space in front of another, that clear area turns red, with a suggested fix.
  • Finishes where they belong. Tiles and fittings appear in the room, not as swatches on a white background.
  • Comparable enquiries. Every enquiry follows the same structure, from room size to equipment list.

Example: our bathroom planner

The bathroom planner is an example configurator by Modelwright with a fictional product. All sizes, clear areas, rules and quantities are example values; the demo shows no prices, names no standard, and the clearance check is a planning aid, not professional planning. By default the room is 2.40 × 2.40 m with the shower room preset: a 1.20 m walk-in shower in the left corner of the back wall, a 0.80 m vanity with mirror cabinet in the right corner, the WC on the left wall, the towel radiator on the right wall and the window in the middle of the right wall. The check reads "3 of 3 clear".

Two walls are lowered so you can see into the room. When a fixture moves to a wall behind the cut-away, the camera flies to it. In this room the bathtubs are disabled and say why: the built-in tub needs 1.70 m, the freestanding tub 1.95 m of wall. Pick the family bathroom preset and its button shows the size it needs; the room is set to 2.9 × 3.1 m.

Reduce the room depth to 2.00 m and two areas turn red: only 22 cm stay clear in front of the vanity and the shower. The line under the sliders names both, and a suggestion sits right below it; one click applies it and everything is clear again. The last steps show a review with the checks, an example equipment list with tile areas, an enquiry text to copy and a PDF. The demo does not send an enquiry; text and PDF are created in the browser only. In a project the enquiry goes by email or webhook to your sales team, your dealer or an installer.

Tested: on an earlier build (v14) a 46-step journey ran on seven emulated screen sizes from 360 px to desktop and passed on each. An independent QA round then found ten defects, among them a towel radiator that could stand behind the open door. They were fixed (v18); after that every control was tested again on two emulated sizes (1440 and 393 px), and a second reviewer who did not build the demo re-checked eight of the ten fixes: pass. The seven-size journey was not repeated after the fixes. No real phones were tested.

Example configurator · fictional product

Bathroom planner

Plan a bathroom in a 3D cut-away: set the room size, place shower, bathtub, vanity and WC on the walls, choose tiles and fittings, and see at once whether there is enough free space in front of each fixture.

Furniture in the buyer’s room · Dimensions and sizes · Layout and planning · Options, modules and accessories

How placement, snapping and the clearance check work in detail is covered in Bathroom layout: placement and clearance rules.

How is it built for your range?

For your product we build the planner with your showers, bathtubs, vanities, mirrors and WCs, your fronts, tiles and fitting finishes, your planning rules and distances from your own documentation, your equipment list with item numbers, your enquiry route and, if you wish, your prices. The presets become your series or bundles. The model is built from your dimensions and drawings, not from a stock model. If you make washroom cubicles and lockers for schools, sports venues or workplaces, the logic for runs of many cubicles is in Locker and washroom cubicle configurator for makers.

Who needs which details in specialist retail, your own shop or contract business is covered in Furniture configurator enquiries, dealers and contract; the effort in Furniture configurator cost and buying questions. The project process is on 3D configurator development.

Send us your range and your planning rules, and we will reply with a proposal and a fixed-price quote.

Frequently asked questions

Does the bathroom planner replace professional planning?

No. It makes sure the enquiry arrives with a room size, a layout and a first space check. The clear areas in the demo are example values; your product documentation, the installer and the site survey decide.

Can we use our own product sizes and distances?

Yes. In the demo, product sizes, clear areas and side gaps sit in a separate data file, apart from the program logic. In a project your sizes and planning distances replace these example values.

Can the planner show prices?

The demo shows no prices. Pricing per fixture, bundle and tile area can be added in a project if you want to show prices.

Sources

  1. Demo features: "Live in this demo" list and note on the bathroom planner library page, read 18 November 2026: modelwright.de/en/library/bathroom-planner-configurator/
  2. Default, rules and presets: demo source code (data.js: RANGE, RULE, PRESETS; app.js: placement, clearance check, suggestions, equipment list) and schema notes, read 18 November 2026; test results: QA log of 17 and 18 November 2026 with an independent QA round and re-check, emulated devices.

Read next