Cold room configurator software for makers of modular cold rooms
What a 3D configurator for modular cold rooms needs: sizes on a panel grid, use and ambient temperature, door, plug-in unit, shelving with an aisle check.
Short answer: for makers of modular cold rooms and insulated panels, a configurator is worth having when it turns a largely standard product into a complete data sheet in minutes: sizes on the panel grid, use and ambient temperature, door and hinge side, a suitable plug-in cooling unit, shelving with a clear aisle and a check that the room fits the space. The buyer, or their refrigeration contractor, then holds a document your team can quote from.
This guide is for managing directors, sales and product managers at manufacturers of cold rooms and insulated panels, and for refrigeration contractors who plan and install them. Buyers include restaurants and caterers, butchers, bakeries, food retailers, canteens, laboratories and businesses with a store room that needs cooling. Often it is the owner, or a kitchen designer, looking for a cold room for one particular room.
In our view this market has a typical shape: a modular, largely standard product, enquiries that resemble each other, and many of them coming through dealers or refrigeration contractors. This guide therefore covers the path from grid to data sheet. Made-to-measure walk-in coolers and freezers, where doors and glass openings can sit anywhere on any wall and a drawing is signed off, are covered in a separate guide on walk-in cooler configurator software.
What makes modular cold rooms different?
- The grid sets the size. Cold rooms are built from panels, so width and depth come in fixed steps and height from a few available heights.
- Temperature is a requirement with consequences. Use temperature and ambient temperature together decide which refrigeration and insulation are suitable. Buyers know the first and rarely think about the second.
- Fit-out is part of planning. Shelving and the aisle between it decide how much the room really holds. Without a shelving plan, a room is easily ordered too small.
- The space is given. The room has to get through doors and corridors and stand with clearance to walls and ceiling.
Engineering stays with the manufacturer and the refrigeration contractor. A configurator does not calculate cooling capacity or promise insulation values. It collects the information that design starts from, and shows notes based on rules you set.
Which features does it need?
| Feature | Why | In our example configurator |
|---|---|---|
| Width and depth on a grid, height from a list | Only sizes you supply | Yes, 100 mm grid, two heights |
| Use and ambient temperature | Capture the requirement | Yes, with a ΔT check |
| Floor, door position, hinge side | Settle access | Yes |
| Cooling unit | Suggest suitable equipment | Yes, plug-in units as options |
| Shelving layout with aisle check | Show usable space | Yes |
| Surface colours | Finish | Yes |
| Placement in the room | Does it fit? | Yes, a placement check |
| Data sheet | Basis for a quote | Yes, enquiry text and a two-page PDF data sheet |
| Refrigeration design, prices, lead times | Binding figures | No |
What does it change for makers and contractors?
We do not promise figures. The effect shows in places you will recognise:
- A data sheet instead of a sketch. Every enquiry has the same details in the same order: sizes, temperatures, door, unit, shelving, colours.
- Ambient temperature gets asked. Because the configurator asks for it, it arrives, and the check flags combinations worth a second look.
- Shelving is planned in. Buyers see whether an aisle remains before they fix a size.
- Contractors share one tool. If you sell through refrigeration contractors, they can use the same configurator when advising buyers and pass on the data sheet.
How can you tell whether it is worth it for your range?
Not every cold room range needs a 3D configurator. These questions help: does your sales office produce many data sheets or quotes for rooms that differ only in size, door and unit? Do enquiries often arrive without ambient temperature, door position or a shelving plan? Do you sell through dealers or contractors who need a consistent tool in front of buyers? Are some rooms regularly ordered too small because nobody thought about shelving and the aisle? If several answers are yes, a configurator with a data sheet is usually the sensible first step. A shop with fixed prices can follow later if your standard rooms suit it.
Example: our cold room configurator
The cold room configurator is an example configurator by Modelwright with a fictional product. Temperature and check values are simplified sample values, not guaranteed; it is not a refrigeration design and not a quote [1]. It offers width and depth on a 100 mm grid with two heights, use and ambient temperature with a ΔT check, floor, door position and hinge side, plug-in cooling units as options, a shelving layout with an aisle check, surface colours and a placement check in the room. It ends with enquiry text to copy and a two-page PDF data sheet. The controls of this demo are in German; in a project we set up the languages you need.
Example configurator · fictional product
Cold room configurator
Plan a cold room: sizes on a 100 mm grid, use and ambient temperature, door, cooling unit and shelving with an aisle check – with a PDF data sheet.
How the grid, temperatures and shelving can be written as rules is covered in cold room configurator rules: grid, temperature and shelving.
How would it be built for your range?
We build it with your panel grid and heights, your doors and floors, the mapping from temperature range to units and panel thickness that your sales office takes from tables today, your shelving and colours, and your data sheet layout. If you sell through contractors, each can have their own entry point with their contact details, and the enquiry goes to them, to you or to both. Photos, drawings and data sheets are usually enough; we use CAD when it suits the web.
Who receives the enquiry is covered in configurators for stores, booths and enclosures: from enquiry to quote, and the project in custom 3D configurator development.
Frequently asked questions
Does it calculate cooling capacity?
No. It captures temperatures and sizes and suggests units according to your mapping. Design is done by you or your refrigeration contractor.
Can the data sheet show prices?
The demo shows none. If you want list prices for standard rooms, the configurator can calculate them from your price list.
Which language is the demo in?
German. Further languages are set up in a project.
Sources
- Modelwright library, cold room configurator, "Live in this demo" list and language note, read 14 November 2026: modelwright.de/en/library/cold-room-configurator/


