Industries & use cases

Walk-in cooler configurator software for made-to-measure coolers and freezers

What a 3D walk-in cooler configurator needs: cooler, freezer or combo, indoor or outdoor, doors and glass openings on any wall, and values for a drawing.

Short answer: for makers of made-to-measure walk-in coolers and freezers, a configurator earns its keep when it does the work that comes before drawing approval: cooler, freezer or combination, indoor or outdoor, the buyer's own sizes, doors and glass openings exactly where they are needed, floor, ramps and refrigeration unit. Door values come out the way a drawing request form needs them. The buyer sees their walk-in; your team gets what it needs for the first drawing.

This guide is for managing directors, sales and product managers at manufacturers of walk-in coolers, freezers and insulated panels who build to size, and for refrigeration contractors who plan them. Buyers include grocery and food production, commercial kitchens, restaurants with their own storage, drinks distributors, florists and businesses placing a walk-in outdoors next to a building. Several people are usually involved: owner, kitchen designer, refrigeration contractor, sometimes an architect. When the kitchen designer fixes the door, the contractor the unit and the owner the budget, one shared model helps more than another e-mail attachment.

Unlike a compact standard cold room, the grid is not the main question here; position is. Where is the door, where a glass door to the sales floor, where the ramp for a pallet truck, how is a combination split? If you sell compact rooms from a panel grid with a data sheet, see cold room configurator software instead.

Walk-in cooler configurator – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

What makes made-to-measure walk-ins different?

  • The floor plan is the product. Doors and glass openings can sit on any wall, and their position shapes the buyer's workflow and what you manufacture.
  • Three base types with their own questions. A cooler, a freezer and a combination with a partition wall differ in floors, doors and units.
  • Indoor or outdoor changes a lot. An outdoor walk-in needs a roof, other finishes and a different base from one inside a building.
  • It ends in a drawing. Before anything is built, the buyer approves a drawing. The values for it, such as door size, hinge and offset from the corner, are often collected today by form and phone.

Refrigeration and insulation design remain with the manufacturer and the refrigeration contractor. A configurator promises no insulation values or cooling capacity. It makes sure the information that design starts from is complete and unambiguous.

Which features does it need?

FeatureWhyIn our example configurator
Cooler, freezer or combinationPick the base typeYes
Indoor or outdoorBuild and finishesYes
Sample sizes or own sizesQuick start or size to the roomYes, in ft-in or mm
Drag doors and glass openingsSet the floor planYes, along any wall in plan or 3D
Door values for a drawing formPrepare the drawingYes: size, hinge, side, offset
Floor, ramps, refrigeration unit, accessoriesEquipmentYes
Exterior and interior finishes, insulationBuildYes, insulation with sample values
Review with checks and enquiryPrepare quote and drawingYes, enquiry text and PDF
Refrigeration design, drawings, pricesBinding documentsNo

What does it change?

We do not promise figures. But the road to the first drawing gets shorter, because questions that almost every enquiry raises today fall away:

  • Door position is unambiguous. Instead of "door front right", you get side, hinge and offset.
  • Glass openings are planned in. A buyer who wants a glass door to the sales floor sees it in the model and gives its position.
  • The type is settled. Cooler, freezer or combination, indoor or outdoor, are decided before your team starts work.
  • Everyone sees the same thing. Owner, kitchen designer and contractor work from the same model and the same PDF.

Example: our walk-in cooler configurator

The walk-in cooler configurator is an example configurator by Modelwright with a fictional product. Insulation and check values are sample values, not guaranteed; it is not a refrigeration design and not a quote [1]. It offers cooler, freezer or combination, indoor or outdoor location, sample sizes or your own sizes in ft-in or mm, doors and glass openings that can be dragged along any wall in plan or 3D, door size, hinge, side and offset as values for a drawing form, floor, ramps, refrigeration unit and accessories, exterior and interior finishes with a colour palette, insulation with sample values and a review with checks. It ends with enquiry text and a PDF.

Example configurator · fictional product

Walk-in cooler configurator

Plan a walk-in cooler or freezer: size, location, doors and glass openings on any wall, floor, refrigeration unit and finishes – with review checks and a PDF enquiry.

Prefab process cells · Dimensions and sizes · Colours · Materials and finishes

How doors, glass openings and the floor plan can be written as rules is covered in walk-in cooler configurator rules: doors, glass openings and layout.

How would it be built for your range?

We build it with your panel systems, heights and size limits, your door and glass door types with their minimum clearances, your floors, ramps and units, your finishes, and the drawing request form your team uses today. The fields of that form become the structure of the enquiry. Photos, drawings and data sheets are usually enough; we use CAD when it suits the web.

Who receives the enquiry and how it turns into a quote is covered in configurators for stores, booths and enclosures: from enquiry to quote, and the project in custom 3D configurator development.

Frequently asked questions

Does the configurator replace the drawing?

No. It supplies the values your team uses to produce the drawing the buyer then approves.

Why feet and inches?

The demo works in ft-in or mm. If you supply metric and imperial markets, you keep the data once and the display converts.

How is a combination split?

In the demo the combination is its own type. Where the partition and the doors between the cooler and freezer sections may go is set by you in a project.

Sources

  1. Modelwright library, walk-in cooler configurator, "Live in this demo" list, read 14 November 2026: modelwright.de/en/library/walk-in-cooler-configurator/

Read next