Industries & use cases

Control cabinet configurator software for enclosure manufacturers: features, benefits, build

What a 3D control cabinet configurator needs for enclosure makers: type, size grid, door, cut-outs for fans and cooling, cable entry and a PDF enquiry.

Short answer: a control cabinet configurator is worth building for makers of control cabinets and electrical enclosures when it does more than list part numbers: type and size from your grid, door and lock, fans, viewing windows and cooling units in the right place on the door, plus cable entry and interior. It should end in an enquiry with outer dimensions, a door drawing and an accessory list, so your estimators already have the answers to the usual questions about door, accessories and cable entry.

Control cabinet configurator – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

Who is a control cabinet configurator for?

This guide is for managing directors, sales and product leads at makers of control cabinets, wall-mounted enclosures, stainless steel enclosures, terminal boxes and cabinet accessories, and at panel builders with their own enclosure range. Their enquiries come from panel builders, design engineers in machine and plant building, electrical planners and distributors.

A first enquiry often names only the outline: wall-mounted or floor-standing, an approximate width, a fan in the door, perhaps a viewing window. For the quote you need more: hinge side, lock, plinth, cable entry and, above all, exactly where the door cut-outs go.

What makes control cabinets different?

  • Sizes come from a grid. Width, height and depth are steps in your range, not free values. The configurator has to know the grid and offer only valid sizes.
  • The door is where the configuring happens. Filter fans, outlet filters, viewing windows and cooling units sit in or on the door. Whether they fit depends on door width, the edge margin, the lock zone and, on double doors, the joint between the leaves.
  • Cabinets are bayed. In a suite each cabinet has its own width and door, but height and depth are shared. Side panels only sit at the two ends.
  • The inside counts. Mounting plate, mounting rails, cable ducts and cable entry at the top and bottom are part of the order even though you cannot see them with the door shut.

A catalogue with size tables answers the size question. It does not tell anyone whether a given fan fits next to the lock. That is the gap a configurator with a door view closes.

Which features does it need, and what does our example show?

FeatureWhyIn the example configurator
Types: wall-mounted enclosure, floor-standing cabinet, bayed suitereflect the rangeyes; suite of 2 to 5 cabinets
Width, height, depth from the grid; plinthoffer only sizes you supplyyes, example grid; each width set separately in a suite; plinth none, 100 or 200 mm
Door, hinge side, lock, finishdefine the frontyes; single or double, left or right, three locks, light grey powder coat or brushed stainless steel
Door cut-outs with a fit checkplace fans, windows and cooling units correctlyyes; cut-out editor checked against door frame, lock zone, leaf joint and other cut-outs
Cable entry, interior, lightcomplete the orderyes; blank plate, gland plate or brush strip at top and bottom; mounting plate; LED light with door switch
Door opening and exploded viewshow interior and how bays joinyes
Summary, enquiry text, PDF with door drawingsa complete enquiryyes; sending is set up in a project
Your prices, bill of materials, machining dataquote and productionno, possible in a project

What does it bring?

We do not promise figures. The benefit lies in clarifications that today happen by email or phone after the first enquiry:

  • The enquiry includes the door layout. Every cut-out is listed with its size and position, and the PDF draws each door from outside with its cut-outs.
  • Conflicts show up before the quote. If a cooling unit is too big for the door or a fan sits in the lock zone, the buyer sees it straight away and can re-plan.
  • Comparable enquiries. Every enquiry has the same structure: type, outer dimensions, plinth, finish, lock, door and cut-outs per cabinet, interior, cable entry, light.
  • The range is easier to understand. Seeing the door open and the bays join explains a range faster than a dimension table.

Example: our control cabinet configurator

The control cabinet configurator is an example configurator by Modelwright with a fictional product. All sizes, grids, accessory sizes and fit rules are example values. The demo explicitly makes no statement on protection rating, heat, EMC or standards; the manufacturer and the panel builder decide those.

It opens with a floor-standing cabinet 800 mm wide, 2,000 mm high and 600 mm deep on a 100 mm plinth, with a swing handle, a mounting plate with mounting rails, gland plates with cable glands at the top and bottom and an LED light. Six steps lead through the configuration: type, door, cut-outs, interior, check, enquiry. Switching to a bayed suite gives three joined cabinets of 800, 800 and 1,200 mm, and you can choose between two and five cabinets.

When the door opens, the handle turns, the door swings open and the interior with mounting plate, rails, cable ducts and example devices comes into view. In the exploded view the cabinets of a suite move apart and show bay connectors, seals and the side panels that only sit at the ends. The last steps give a summary with the example checks, a copyable enquiry text and a PDF with door drawings. The demo does not send the enquiry; text and PDF are created in the browser only. In a project the enquiry goes straight to your sales team.

Tested: an independent QA round ran the full journey on seven emulated screen sizes from 360 px to desktop, passing 60 of 60 steps on each; the last small change was re-run on two of those sizes. Real devices were not tested.

Example configurator · fictional product

Control cabinet configurator

Plan a control cabinet: wall-mounted, floor-standing or a bayed suite, sizes from a grid, door, lock, fans, windows and cooling unit with a fit check against the door frame – with an opening door, interior, a view of how bays join and a PDF enquiry.

Industrial cells & machines · Dimensions and sizes · Colours · Materials and finishes

How the cut-out fit check and the bayed suite work in detail is covered in Control cabinet door cut-outs, fit check and bayed suites.

How is it built for your range?

For your range we build the configurator with your size grids and types, your doors, locks and finishes, your accessories with their real cut-out sizes, your mounting plates, gland plates and plinths, and your own rules: minimum distances to the door edge, the width from which a door becomes a double door, which accessory may go where. Pricing logic, a bill of materials and machining data for the cut-outs can be added. Types the demo does not show, such as terminal boxes or desk consoles, are added as their own types with their own grid.

How enquiries from configurators for technical enclosures and booths reach sales is covered in Configurators for stores, booths and enclosures: from enquiry to quote. What such a project costs is set out in 3D configurator cost. A related example from the same group is the acoustic enclosure configurator. The project process is described on 3D configurator development.

Send us your enclosure range with grids and accessories – you get a proposal and a fixed-price quote.

Frequently asked questions

Does the configurator check protection rating or heat load?

No. The demo shows fans and cooling units only as accessories with example sizes and says nothing about protection rating, heat, EMC or standards. The sizing, output and position of cooling accessories are for the manufacturer and the panel builder to decide. Your own rules on this can be built in as notes in a project.

Can we use our own size grids?

Yes. The demo reads widths, heights and depths per type from a table. In a project your grids replace that table, and further types are added with their own values.

Can it show prices?

The demo shows none. Pricing per cabinet, accessory and cut-out can be added in a project if you want buyers to see prices.

Sources

  1. Demo features: "Live in this demo" list on the control cabinet configurator library page, read 15 November 2026: modelwright.de/en/library/control-cabinet-configurator/
  2. Grid, default set-up and fit rules: demo source code (data.js, app.js) and schema notes; test results: QA log of 15 November 2026, independent round, emulated devices.

Read next