Industries & use cases

Fence and gate configurator software for fencing manufacturers

What a 3D fence configurator needs for commercial fencing and gate makers: site layout, slope, gate types, run-back checks and quantities.

Short answer: for a fencing and gate manufacturer, a configurator is worth building when it plans a whole installation, not just one panel: the fence line on the site, the slope, the gate and the space it needs to open, and the quantities that follow. The enquiry then arrives with a plan, a length, a panel and post count and the gate details, which is what your estimators need to price it.

This guide is for managing directors, sales managers and product managers at makers of mesh panel, palisade, vertical bar and privacy fencing, at gate manufacturers with swing and sliding gates, and at installers who quote perimeter fencing for commercial and industrial sites. Their enquiries may come from facilities managers, site managers and specifiers who need a first figure for a site.

Fence & gate configurator – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

Why is a fence configurator different from a product configurator?

You are not selling one item; you are selling an installation. That changes what the software has to do:

  • Quantities come from the layout. Fence length, panels, cut panels and posts follow from the site outline, the post spacing and where the gate sits.
  • Terrain changes the build. On a slope, panels are either stepped or raked, and not every fence system can be raked.
  • Sliding gates need room beside the opening. A cantilever gate runs back behind the fence when it opens and needs a straight, clear stretch there. A corner, a tree or a wall can block it.
  • Accessories belong to the gate. An operator, an intercom post or a signal lamp only makes sense when a gate is planned.

A form with a length field and a height drop-down cannot show any of this. A site plan where the fence is drawn and the gate visibly opens can.

What is available off the shelf?

Template software exists for this market. SaleSqueze, for example, lists fence configurators by name on its fence page, such as "Aluminium louvered fence" and "Glass pool fence", and describes the result as "Buyers design your product in 3D and see it in their garden"; the page publishes no price for the fence configurator [1]. Those are the vendor's own statements. Template tools of this kind lean towards residential garden fencing. If you sell perimeter systems with sliding gates, sloping sites and quantity-based quotes, check whether a template can carry your systems, your height steps and your gate rules as they are.

Which capabilities matter?

CapabilityWhyIn our example configurator
Fence type, height from a height list, post spacing, post section, fixingOnly sizes you supplyYes
Fence line from outlines or run by runMatches the real siteYes, up to 8 runs
Slope with stepped or raked installationSettles the build per systemYes, with a limit per fence type
Gate type, clear width, positionPlans the entranceYes
Run-back check for sliding gatesCatches a space problem before the surveyYes, with a one-click suggestion
Live length, panels and postsThe basis of a quoteYes
Enquiry with plan and quantitiesEstimators can price without a call-backEnquiry text and a PDF
Your prices and bills of materialsBudget figures, costingNo, built in a project

What does a maker gain?

We do not promise figures. The gains are in work that is done twice today:

  • Quantities from a plan, not from a phone call. The enquiry states the length, panels and posts instead of "about 50 metres".
  • Gate problems before the site visit. If a cantilever gate cannot run back, the person enquiring sees it on the plan and can choose another gate.
  • Less explaining. Stepped or raked panels, toppings and colours are visible on the model.
  • Comparable enquiries. Every enquiry has the same rows in the same order.

Try the example

Our fence and gate configurator is an example configurator with a fictional product and example values, built by Modelwright with its own geometry. Sizes, run-back and clearance values and checks are example values, and there is no statement on security, structural strength or standards. It offers five fence types (twin-wire mesh panel, welded mesh with V-beams, palisade, vertical bar and aluminium privacy slats), heights from a list per type, a fence line of up to eight runs, slope with stepped or raked panels, swing gates, cantilever and tracked sliding gates, the run-back check with suggestions, toppings, RAL powder-coat colours or hot-dip galvanised, and a live count of length, panels (including cut panels) and posts. The operator, intercom post, closing-edge strip and signal lamp appear as icons and in the model only, with no claim about their function.

What we checked: on the default L-shaped site we recounted the quantities by hand. The demo shows 44.6 m of fence, 19 panels and 24 posts, matching the hand count. The run-back arithmetic matched in 7 of 7 test cases. Device tests were emulated, not run on real phones.

Example configurator · fictional product

Fence & gate configurator

Plan fencing and a gate for a commercial or industrial site: draw the fence line, pick the gate and see on the ground whether the sliding gate's run-back is clear.

Partitions, guarding & shelving · Dimensions and sizes · Layout and planning · Options, modules and accessories

The individual rules for run-back, slope and quantities are explained in sliding gate run-back, slope and quantity rules.

How would it be built for your range?

For your product we build it with your fence systems, heights and panel sizes, posts and fixings, your gate ranges with their run-back and foundation rules, your toppings, colours and operators, your enquiry route and, if you want them, your prices and bills of materials. Drawings, size tables and photos are usually enough; CAD is used when it suits the web. Who receives the enquiry, and how it turns into a site survey and a quote, is covered in from configuration to site survey. For hiring us, see custom 3D configurator development.

Frequently asked questions

Does it replace the site survey?

No. It delivers a complete enquiry with a plan and quantities. Dimensions, ground and foundations are still checked on site.

Can it produce a bill of materials?

The demo counts length, panels and posts. A bill of materials with your part numbers can be set up in a project.

Does it work on a tablet or phone?

Yes, in the browser with no app. We tested the demo at seven emulated screen sizes from phone to desktop, not on physical devices.

Sources

  1. SaleSqueze, fence 3D configurator page, read 14 November 2026: salesqueze.com/fence-3d-configurator

Read next