What is this product type?
An example configurator for fence and gate systems (fictional product). You choose the fence type, height and posts, set the fence line from outlines or run by run and enter the slope; the fence is shown stepped or raked. For the gate you choose a swing gate, a cantilever sliding gate or a tracked sliding gate. The run-back zone is drawn on the ground in green or red, corners and obstacles limit it, and the gate stops at the obstacle when it opens. Fence length, panels and posts are counted live. All sizes and rules are example values; there is no statement on security, structural strength or standards.
Example configurator by Modelwright for manufacturers of partitions, guarding & shelving. Product, sizes, options and prices are fictional sample values – not a product of any real manufacturer; no manufacturer ordered, reviewed or endorsed this demo.
What manufacturers use it for
- Mesh panel fencing for commercial and industrial sites
- Palisade and vertical bar fencing
- Cantilever and tracked sliding gates
- Swing gates and pedestrian gates
For your own product, Modelwright builds the configurator with your fence systems, heights and panel sizes, posts and fixings, your gate ranges with their run-back and foundation rules, your toppings, colours and operators, your enquiry route and, if you wish, your prices and bills of materials.
Whether and how this pays off for your product depends on your range and sales process; we do not promise figures.
Live in this demo
- fence type: twin-wire mesh panel (2D), welded mesh with V-beams (3D), palisade, vertical bar or aluminium privacy slats, each built in 3D
- fence height from a height list per type, post spacing, rectangular / square / round posts, concreted in or on base plates
- fence line from site outlines (straight, L, U, all round) or run by run: add straight / left / right runs, set each length, remove runs
- terrain slope along the gate run with stepped or raked installation; step per panel and raked limit per fence type shown live
- gate types: single or double swing gate, cantilever sliding gate with counterbalance tail, tracked sliding gate, or no gate; clear width and gate position
- signature run-back check: the run-back zone is drawn on the ground, green or red, with needed vs. free length; corners and obstacles (tree, wall) limit it; one-click suggestion (other side, tracked gate, double swing gate)
- opening animation: the cantilever leaf slides over its carriages and stops at an obstacle; swing leaves turn inwards; pedestrian gate
- level gate leaf on a slope with the ground gap at the low end
- operator, intercom post, closing-edge strip and signal lamp as icons and in the model (no function claims); topping: spikes, outrigger with 3 wires or wire coil
- RAL powder-coat colours or hot-dip galvanised
- live fence length, panel count (incl. cut panels) and post count
- gate, site, plan and inside camera presets, dimension labels, reset; industrial site with hall, driveway, car and scale figure
- review with checks, enquiry text copy and PDF download with gate view, plan and site view
Example configurator, fictional product. Sizes, run-back and clearance values and checks are example values, not ratings.
Features:
Possible in your project
- Your product with your sizes, variants and rules
- Your pricing rules, languages and analytics events, set up per project
- Enquiries by e-mail or webhook to your sales team
- From photos, drawings or CAD data, if they are suitable (we check that before we start)
- Product images per variant from the same 3D model
- As its own page or embedded in your website or shop, with hosting and updates if you like
Not offered as standard: AR view in your room, an editor to maintain products yourself, PDF quotes and CPQ, and ERP integrations. We assess these case by case.
Request a configurator for my product