Door, gate and window configurators: from enquiry to site survey and dealer
How a door, gate, window or fence configurator should hand enquiries to sales, dealers and installers, and what our demos actually implement.
Short answer: for made-to-measure doors, gates, windows and fences, a configurator rarely ends at a checkout. It ends at a site survey. It earns its place when the enquiry tells your sales office, dealer or installer everything they need before they visit: the opening, the space around it, the chosen build, the result of each check and who to call. Decide who receives the enquiry before you decide what the configurator looks like.
This guide is for heads of sales, sales operations and dealer managers at manufacturers of industrial and garage doors, front doors, windows, fencing and gates.
Why do these products end at a site survey rather than a basket?
Every unit is made for one opening or one site. What a buyer types into a browser is their own measurement: an opening they measured, a headroom they estimated, a fence run they took from a site plan. Before a firm quote, someone from the manufacturer or its installer checks those numbers on site.
So the configurator's job is not to replace the survey but to make it a short one. It should rule out requests your range cannot meet, such as a sectional door in a garage with too little headroom, and it should hand over the open questions so that the visit starts with them. One software vendor in this market describes the same sequence. Threekit's page for door and window makers says reps and dealers "need to establish swing, hinge side and the opening requirements before choosing the unit" [1]. That is the vendor's own statement, not a study, but it matches what our example configurators show.
What should the enquiry contain for each product?
| Product | Information that prepares the survey | Implemented in our example configurator? |
|---|---|---|
| Sectional, roller and high-speed doors | Clear opening, available headroom and side room, application, track type, operation, accessories, check vehicle | Yes: review with checks, enquiry text and a two-page PDF with outside view and section |
| Windows and lift-and-slide doors | A list of positions: opening type, width, height, material, inside and outside colour, glazing bars | No: the demo shows the product and profile; there is no enquiry |
| Pivot front doors | Structural opening, side and top panels, pivot side, opening direction, finish, handles and locks | Yes: copy the enquiry text and download a PDF |
| Fencing and gates | Fence line with run lengths, slope, gate type, clear gate width, run-back side, obstacles, quantities | Yes: review with checks, enquiry text and a three-page PDF with gate view, plan and site view |
Two points stand out. First, the checks are information in their own right. A red side-room check or a blocked run-back tells your sales office what to discuss on site far better than a free-text note. Second, windows need a different kind of enquiry: a homeowner or contractor fitting out a building asks about a schedule of positions, not one window. A position list is not part of our window example; in a real project it would be the central requirement.
What the examples implement, and what would be project work
All four demos are Modelwright's own example configurators with fictional products and example values. No manufacturer ordered, reviewed or endorsed them. For planning a sales process, the line between what runs today and what we would build matters.
Implemented in the demos
- A review step before the enquiry. The sectional and roller door configurator and the fence and gate configurator show every value and every check on one screen.
- Enquiry text and PDF with the same rows. In our test of the door demo, every summary row and every check title appeared in the PDF, in German and in English. The fence PDF has three pages including the plan with the run-back zone. The pivot front door configurator also produces enquiry text and a PDF.
- Contact fields. In the door demo: name, company, email, phone, quantity and a field for site and notes.
- Privacy in the preview. In the door and fence demos, entries are neither sent nor stored; the text and PDF are created in the browser. We only count which controls are used, never what is typed.
Proposed for your project
- Delivery by email or webhook to your sales team. This is part of our usual project scope; in the demos it is switched off on purpose.
- Routing to the right dealer or installer, for example by postcode. Not part of any demo; we assess it per project, depending on how your dealers receive leads today.
- CRM hand-over is assessed case by case. ERP integration, binding PDF quotes and CPQ are not part of our standard offer.
- Site photos attached to the enquiry, and position lists for windows: neither is in the demos; both are typical project requirements.
Any quote you receive, from us or anyone else, should draw this line explicitly. What each scope costs is covered in scope, cost and procurement.
Manufacturer, dealer or installer: who gets the enquiry?
In this product group there are usually three possible recipients, and each needs something different.
- Your sales office needs the full specification to check feasibility and prepare a quote. Check results and chosen variants matter most here.
- The dealer or door installer also needs location and contact details to arrange the visit. Some manufacturers show dealers more than end buyers: Combeenation, for instance, says its garage door configurator shows prices and further information only in a separate retailer login [2].
- The fitter needs the installation situation: headroom, side room and depth for a door, slope and obstacles for a gate, swing direction for a front door. A section or plan in the PDF often tells them more than any text.
Decide who receives the enquiry first and whether it travels on in the same form. That decides which fields are mandatory and which views belong in the PDF.
How can a configurator qualify leads without putting buyers off?
A check that turns red can either stop an enquiry or improve it. Our examples aim for the second: in the door and fence demos a red check never blocks the enquiry; it names the problem and offers a way out.
- The door demo shows how many millimetres of headroom are missing and suggests a track type that fits; one click applies it. In our tests the suggestion was right in 9 of 9 cases: after applying, the check was green every time, and where nothing fits, no suggestion appears.
- The fence demo offers the other side, a tracked sliding gate or a double swing gate when the run-back is blocked.
- The pivot door demo shows the swing and estimates the walk-through width, with an exposure check based on example rules.
What sales receives is an enquiry with a known issue rather than one built on a wrong assumption. All checks in the demos use example values. Which rules apply to a real product is the manufacturer's decision; the configurator only applies them and does not replace a survey or the manufacturer's planning. The logic behind the checks is explained in the headroom and side room fit check and sliding gate run-back and slope rules.
When does a shop make sense?
A basket fits only where sizes and installation are standardised, such as garage doors in fixed sizes or fence kits for self-assembly. Once a survey is needed, an enquiry is the more honest ending. A guide price can still help to set expectations, as long as it is clearly a guide. None of the four demos in this group shows a price.
The four examples
Example configurator · fictional product
Sectional & roller door configurator
Plan an industrial or garage door: enter headroom and side room and see in the building section at once whether tracks, barrel or head box fit.
Example configurator · fictional product
Fence & gate configurator
Plan fencing and a gate for a commercial or industrial site: draw the fence line, pick the gate and see on the ground whether the sliding gate's run-back is clear.
Example configurator · fictional product
Pivot front door configurator
Plan a pivot front door: structural opening with side and top panels, four door faces, pivot side and direction with a walk-through estimate, finishes and hardware – with a PDF enquiry.
Example configurator · fictional product
Window and door configurator
A window and door system: fixed, tilt-and-turn, double sash or lift-and-slide door, width and height, material, colour and glazing bars – with opening and a profile section.
The window and door configurator covers five opening types, material, colours and a profile section, but no enquiry. It is included because it shows how a product becomes visible before the enquiry path is built. For an overview of configurators in other industries, see 3D product configurators for manufacturers; for how we build one for your own range, see custom 3D configurator development.
Sources
- Threekit, "Door and Window Quoting for Reps and Dealers", read 14 November 2026: threekit.com
- Combeenation, garage door configurator, read 14 November 2026: combeenation.com
- Demo features: the "Live in this demo" lists on each linked library page (read 14 November 2026).


