Technology

Floating or stationary dock: mounting rules, sections and parts list in a configurator

How a dock configurator checks floating against stationary mounting, counts sections, derives a parts list and shows feet and inches or metres.

Short answer: an aluminium dock configurator has three parts. A mounting rule: given the water depth and level variation the buyer states, does a floating or a stationary dock fit your rule? A quantity logic: shape, walkway and head sections produce frames, floats or posts, connections and decking. And an output that dealers and installers can read, in feet and inches or in metres.

Aluminium dock configurator – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

How does the configurator check the mounting type?

Some aluminium dock makers offer the same frame in two builds: on floats or on posts. Not every buyer knows which one they need. A configurator can lead them to a pre-selection with two questions, whose thresholds you set as the maker:

Buyer's answerStationaryFloating
Depth up to threshold A, variation up to threshold Bfits the rulenote: check depth on site
Depth above threshold Adoes not fit the rule; suggest floatingfits the rule
Variation above threshold Bdoes not fit the rule; suggest floatingfits the rule

Two design questions decide whether this works in practice:

  • Categories or numbers? Not every buyer knows the depth exactly. A choice such as "shallow" or "deep", with your threshold in the label, can be more honest than a number field that suggests precision.
  • Note or block? A rule that does not fit should mark the configuration and offer a suggestion, not stop it. The decision stays with the dealer on site.

Our example uses example rules for water depth and level variation [1]. For your real product, only values you stand behind apply. Whether a dock is permitted and stable at a site is judged by your company, your dealers and, where required, engineers and authorities, not by the configurator.

What does the profile change for floating docks?

Some floating aluminium docks come with floats of different heights. The profile decides how high the deck sits above the water and so how easy it is to step across from a boat or the shore. In the configurator the profile is therefore a question of use, not a technical figure: for example low for kayaks and swimmers, higher for bigger boats. The demo offers a low and a medium floating profile plus stationary mounting [1]. Ratings such as freeboard or capacity belong on screen only if you release them for that exact build.

How are shape and sections counted?

  • Shape: straight, L (head to one side) or T (head to both sides).
  • Walkway sections: counted from the shore; they give the length.
  • Head sections: L and T only; they give the head width.

Each count has a lower and an upper limit. An entry outside the range should show a message and be set to the nearest valid value. In the demo this is the input validation for walkway and head section counts [1]. When a section is added, it snaps on in a short animation. That explains the modular build more clearly than text.

How is the parts list derived?

With dealer sales, the parts list is the most important output. It comes from simple per-section rules that you supply:

ItemQuantity fromNote in the list
Frame sectionswalkway plus head sections–
Floats or postssections × your quantity per section, by mounting typeprofile or post length
Connectionsjoints between sections, L/T junction–
Deckingsections × boards per section, only if decking is in the kitwithout decking: frame kit
Ladderchoiceversion
Anchoringsite-dependent"to be confirmed on site"

Items the configurator cannot know for certain, such as anchoring or post length on an unknown bottom, should be in the list but clearly marked "to be confirmed", so the dealer knows what to check. The demo includes a parts list with sample quantities [1]; the quantities your system really needs come from your installation documents.

Decking in the kit or the buyer's own boards?

A maker who sells frames only has a presentation problem: a bare aluminium frame does not look like a finished dock. A preview with the decking the buyer plans to fit solves that. The demo shows cedar decking or a preview of your own boards [1]. In the parts list this becomes the difference between "decking included" and "frame kit, decking by others".

Feet and inches or metres?

For makers selling in Europe and North America one rule keeps this maintainable: store dimensions once in one unit and convert only for display. Round when displaying, not in the data, or rounding errors add up over many sections. Dimension labels, parts list and enquiry should use the same unit as the interface. The demo switches between ft-in and metric, with views and dimension labels [1].

What goes to the dealer?

A complete enquiry carries mounting type and profile, shape, section counts and overall dimensions, ladder and decking, the depth and variation answers with the rule result, and the parts list with its open items. In the demo an inquiry text and a PDF can be produced [1]. How the enquiry reaches the right dealer is covered in dock configurator enquiries, site visits and dealers.

Try the example

The aluminium dock configurator is an example configurator by Modelwright with a fictional product and example values. Switch between stationary and floating, change the depth answers and add a head section.

Example configurator · fictional product

Aluminium dock configurator

Put together an aluminium dock: floating or stationary, straight, L or T, sections, ladder and decking – with water-depth rules, a parts list and a PDF enquiry.

Docks & marine · Dimensions and sizes · Materials and finishes · Options, modules and accessories

Who such a configurator is for is covered in aluminium dock configurator software, and the technical build in implementing a dock configurator. For a project of your own, see custom 3D configurator development.

Frequently asked questions

Is the mounting rule result binding?

No. It is a pre-selection based on your thresholds. The decision is made by the dealer or maker after checking on site.

Can floating and stationary sections be combined?

If your system allows it, yes. That is one more rule in the data; the demo offers one mounting type per dock.

Can the parts list include prices?

Yes, if you supply them. For dealer sales a list without prices, which the dealer prices, can make more sense.

Sources

  1. Modelwright library, aluminium dock configurator, "Live in this demo" list and sample-value note, read 14 November 2026: modelwright.de/en/library/aluminum-dock-configurator/

Read next