Technology

Food trailer hatch and equipment fit rules: the logic behind the configurator

The rules a food trailer configurator needs: menu presets, equipment along the back wall, serving hatch width and position, staff count, length, enquiry.

Short answer: a food trailer configurator needs four groups of rules. Presets: which menu brings which equipment and which length? Back wall: does the chosen equipment fit side by side? Serving hatch: how wide can it be at this length, and where may it sit? Staff: how many people can work at this length and fit-out? All four hang off the trailer length. Our example configurator shows these groups with simplified sample values.

Food trailer configurator – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

What are the parameters of a food trailer?

The inputs fall into three layers: the vehicle, the fit-out and the look.

LayerParameterDepends on / limits
VehicleTrailer lengthsets usable back wall, maximum hatch width and room for staff
VehicleOptions such as wheel cover or generatorindependent of length, but part of the specification
Fit-outMenu as a starting pointproposes a length and a set of equipment
Fit-outEquipment modulesoccupy the back wall; total width against available length
Fit-outServing hatch side, width, positionwidth and position limited by length and remaining wall
Fit-outPeople working insidechecked against length; in a project also against the fit-out
LookCovering colour, own nameno technical dependency

All values are sample values of a fictional product. Your lengths, equipment and hatches are yours to define.

Why start from the menu?

An operator knows whether they will sell crêpes, burgers or smoothies. They rarely know which length they need. A preset translates one into the other: choosing "crêperie" proposes a length and a list of equipment modules, which the buyer can then change. The example configurator has four such starting points: snack, crêperie, fruit bar and pastry.

For your range this is a table: per menu, a starting length and a list of modules. It can be maintained without programming when it lives in a data file rather than in the code. The preset is only a suggestion; the rules after it apply to every fit-out in the same way.

How does the configurator check that the equipment fits?

In the example the appliances stand in a row along the wall opposite the hatch. The rule is a sum: the widths of all chosen modules must not exceed the usable length of the back wall. "Usable" is defined by the manufacturer, for instance net of wall thickness, door or corners.

The example configurator has equipment modules with a check that they fit the back wall. A real range usually needs further rules, which we would write down with you in a project:

  • equipment that only makes sense from a certain length upwards;
  • equipment that should not stand next to each other, such as a heat source beside a chiller;
  • equipment that requires an extraction hood or a particular connection;
  • equipment under the hatch rather than on the back wall, such as a display counter.

These rules come from your own planning practice. Whether a layout meets food hygiene or technical requirements is still checked by the manufacturer; the configurator only reflects the rules you set.

How is the serving hatch handled?

The hatch has three properties: side, width and position along the trailer. The side follows the pitch, for instance the pavement or square side. Width and position are limited: there must be wall left on each side of the opening, and the shorter the trailer, the narrower the widest possible hatch.

In the example configurator, side, width and position can be chosen and are bound by fit rules. A good implementation explains a limit rather than quietly changing an input: "at this length the hatch can be at most this wide" helps the buyer more than a slider that suddenly stops.

How is the number of staff checked?

Staff numbers are an operational question: how many customers must be served at the lunchtime peak? In a configurator this becomes a check against length and fit-out. The example configurator checks how many people can work inside. In a project you decide which length you recommend for which team size; it is your company's recommendation, not a regulation.

What comes out at the end

The summary lists menu, length, hatch, equipment, options, colour and name. In the example it can be copied as enquiry text and downloaded as a PDF; prices in it are fictional sample prices. In a project the enquiry goes to your sales team by email or webhook, with exactly the details your office needs to quote. How that enquiry is used is covered in food trailer configurator software.

The example configurator

The food trailer configurator is an example configurator by Modelwright with a fictional product; all sizes, prices and checks are simplified sample values and not a quote.

Example configurator · fictional product

Food trailer configurator

Fit out a food trailer: a starting point by menu, length, serving hatch, equipment modules with a fit check, colour and your own name – with an interior view and a PDF enquiry.

Vehicles & trailers with interior · Dimensions and sizes · Colours · Options, modules and accessories

What data you supply for your rules

For a configurator with your range we need the documents your sales team plans with today: lengths and body sizes per model, a list of equipment with width and position, hatch widths and minimum wall sections, your recommendations for team size, options and colours and, if prices should appear, your price rules. Where a rule only exists in an experienced salesperson's head, we write it down together as condition, consequence and message. How data, geometry and mobile devices come together is covered in building a 3D configurator for trailers and vehicle bodies. For hiring us, see custom 3D configurator development.

Frequently asked questions

Does the configurator suggest a length?

Through the menu preset, yes. Whether it actively proposes a longer trailer when too much equipment is chosen is something we decide with you in the project.

Can we add new equipment ourselves?

Equipment and sizes are stored as data. A self-service editor is not standard; we add new equipment for you: small changes within the care plan, new geometry as a separate order.

Read next