Garden room configurator rules: size grid, placement, boundary distance and guide checks
The rules a garden room configurator needs: fixed and bespoke sizes, doors by width, placement in the garden, distances to the fence and guide notes.
Short answer: a garden room configurator needs rules in three areas: size (which sizes are standard, which are bespoke, and what changes with size), specification (which doors, windows and add-ons fit which size) and site (where the room stands, what distances follow, and which notes the buyer sees). The third area is delicate because it sounds like planning law. A configurator can only show notes the manufacturer writes; it cannot decide anything.
What does the buyer choose?
| Input | In the example | Proposed dependency |
|---|---|---|
| Size | Fixed steps or custom in 100 mm steps | Drives price, available doors and footprint |
| Price | Sample price per size | List price for steps, a separate rule for bespoke |
| Doors, windows | Choice | Wide door types only from a minimum width |
| Roof, veranda | Choice | A veranda adds to the area that stands in the garden |
| Layout | Choice | Only sensible from a certain size |
| Cladding | Several materials | Some materials only for certain ranges |
| Garden | Garden size, placement, distances to the fence | The basis of every note |
This is an example configurator with a fictional product; all values are example values. The first two columns follow the "Live in this demo" list on the library page. The dependency column is our proposal for how a manufacturer can write down its rules, not a description of the demo's logic.
How are standard and bespoke sizes handled?
The demo offers both: sizes from fixed steps with a sample price, and custom sizes in 100 mm steps. For your configurator we propose three rules:
- Limits for bespoke sizes. Length and width have a minimum and a maximum, and the step follows your production. A value typed outside the range is set to the limit, with a note that larger buildings can be requested.
- A price for bespoke sizes. Standard sizes use the price list. For bespoke sizes there are two honest options: a "from" price taken from the next standard size up, or a pricing rule you derive from your own costing, for example from a few reference points. Either way, the price is shown as a guide.
- Mark standard or bespoke in the enquiry. Your office then sees at once whether the enquiry comes from the list or needs costing.
Which options depend on size?
With garden rooms, much depends on the width of the front. Double or bi-fold doors need more wall than a single door; a layout with a store room needs length. We suggest writing each dependency as condition, consequence and message:
| Condition | Consequence | What the buyer sees |
|---|---|---|
| Front narrower than a door type's minimum width | The door type cannot be chosen | "Available from width X" |
| Size reduced so the chosen door no longer fits | The door switches to the nearest one that fits | A note saying what changed |
| Veranda added | The footprint in the garden grows by the veranda depth | Distances and notes recalculate |
| Partitioned layout chosen | Inner wall and second door in the model | The plan shows both rooms |
The second row matters most. A configurator should never change a choice silently; when a rule applies, it says so.
How do placement and boundary distance work?
According to the library page, the buyer enters the garden size, places the room and sees the distances to the fence. A simple, robust form of this logic: the garden is a rectangle, the room is a footprint including any veranda, and the configurator measures the distance to the boundary on each side. Moving the room updates the distances at once. In a project, the garden could also be drawn as a polygon, or you could set a minimum distance your installers need; that is a proposal for your project.
What may guide checks say, and what not?
The demo shows three simplified guide checks: height near the boundary, garden coverage and floor area. The library page says these are simplified sample values, not a quote and not a planning or building-regulations check. They resemble the kind of limits public guidance describes. For England, the Planning Portal lists conditions under which outbuildings are permitted development, including a maximum height of 2.5 metres for a building within two metres of the boundary and a limit on how much of the land around the original house may be covered. It also says its guidance relates to England, that policy in Wales may differ, and that local rules can apply [2].
That is exactly why a configurator should not turn these limits into a verdict. Our proposal: the configurator shows notes whose wording you write and stand behind, such as "At this height near the boundary, please check with your local planning authority". It does not present a number as a legal limit and promises nothing. Whether a project needs permission is for the planning authority to decide; responsibility for the information lies with the buyer and the manufacturer, not with the configurator.
What data do you supply?
Your standard sizes with prices, the grid and limits for bespoke sizes, your pricing rule for bespoke sizes, door and window types with minimum widths, roof and veranda options, cladding and colours, your placement notes, and the details your sales team needs to quote, such as base and access. If a rule is not written down, we write it with your sales team as condition, consequence and message.
What comes out at the end
The enquiry should state the size, marked standard or bespoke, the specification, cladding, garden dimensions, position and distances, and the notes that were shown. In the demo the enquiry text can be copied and downloaded as a PDF; in a project it goes to your sales team by email or webhook.
Example configurator · fictional product
Garden room configurator
Plan a garden room in your own garden: choose the size, place it, check the distances, pick doors, windows, roof and cladding – with a sample price and a PDF enquiry.
Try it in the garden room configurator. Who such a configurator is for is covered in garden room configurator software. How the model, the garden scene and the animations are built is covered in implementing garden building and sauna configurators. For hiring us, see custom 3D configurator development.
Frequently asked questions
Are the guide checks legally binding?
No. In the demo they are simplified sample values. In your project the configurator shows your wording; the planning authority decides.
We deliver to England, Wales and Scotland. What then?
We recommend a general note rather than figures per nation, pointing to the local authority. Region-specific notes are possible if you supply and maintain them.
Does the configurator check structure or snow loads?
No. It represents your product rules. Structural design and any approvals stay with you as the manufacturer.
Sources
- Modelwright library: garden room configurator, "Live in this demo" list, read 14 November 2026: /en/library/garden-room-configurator/
- Planning Portal: Outbuildings – Planning permission, read 14 November 2026: planningportal.co.uk/permission/common-projects/outbuildings/planning-permission


