Costs & planning

Configurators for halls, pavilions and modular buildings: scope, cost drivers and worked examples

What drives the cost of a configurator for steel halls, pavilions, guard booths, restroom blocks and site cabins, with year-one and three-year examples.

Short answer: for halls, pavilions and modular buildings, five things drive the effort: how many grids and tables go in, whether rooms and a floor plan are needed, how many states the model has (doors, night, stacked, towable, closed), whether a price appears, and how many recipients the enquiry has. Modelwright's packages and entry prices are set out in our guide to what a 3D configurator costs. Here we work them through for three typical building manufacturers, at entry prices excluding VAT.

Timber pavilion configurator – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

What drives the effort for buildings?

The general cost factors are covered in what a 3D configurator costs. For this product group, five drivers weigh more than elsewhere. The examples come from our five example configurators with fictional products.

  1. Grids and tables. A steel building with lists for span, length and eaves height is one data set. A pavilion range like the one in the timber pavilion configurator, with seven series and a price per size, is a table with many cells, where every empty cell is a blocking rule. More series cost less than more different kinds of table logic.
  2. Rooms and floor plan. Once a building has rooms, it needs inside-out arithmetic, room areas, a roof-off plan and layout rules. The restroom building configurator works this way; the steel hall and pavilion have no rooms.
  3. States of the model. Each animation and state is its own work and has to be tested on phones: doors opening, day and night, shutters closing, a second storey with a stair, a chassis. The site cabin configurator has several, plus exclusions between stacking and towing.
  4. Prices. A price per table size is simple. A band between table sizes, surcharges per option and delivery form, or separate dealer prices are each rules of their own. No price is cheapest to build but costs follow-up calls.
  5. Recipients. One email address is the simple case. Separate routes for sales and the hire desk, dealer mapping by region, or a CRM hand-over are assessed per project.

What rarely drives effort: more colours from a palette, more sizes within a list, another facade with the same geometry.

Which scope fits which building?

What the packages include is set out in what a 3D configurator costs. For building manufacturers we map them roughly like this:

  • One style or series to show, with no size choice and no rules: Package A (3D product viewer).
  • One product family with grids, options, blocks and an enquiry, such as a steel building range or a pavilion range: Configurator package.
  • Several families, rooms with a floor plan, several states, prices with surcharge logic or separate enquiry routes: the scope is set in the fixed-price quote; the cost guide describes a planner with checks as the Complete package.

That is our own assessment based on the examples, not a fixed rule.

What do year one and year three cost?

For Configurator and Complete, the monthly fee is part of the package; care runs for at least 12 months from go-live and can then be cancelled monthly. So year one is the useful figure, and year three helps with budgeting. Three examples at entry prices, excluding VAT; the scenarios are invented to show the arithmetic:

ScenarioPackageOne-timeYear 1After 3 years
Guard booth maker shows two styles in 3D on its websitePackage A, hosted by usEUR 1,990EUR 1,990 + 12 × EUR 19 = EUR 2,218EUR 1,990 + 36 × EUR 19 = EUR 2,674
Pavilion maker with one range, size table, price per size and enquiryConfiguratorEUR 5,400EUR 5,400 + 12 × EUR 199 = EUR 7,788EUR 5,400 + 36 × EUR 199 = EUR 12,564
Cabin maker with a hire fleet: several uses, rooms, stacking, towable, separate enquiry routesCompleteEUR 8,880EUR 8,880 + 12 × EUR 249 = EUR 11,868EUR 8,880 + 36 × EUR 249 = EUR 17,844

These are entry prices; the fixed price for your project may be higher, depending on the drivers above. With Package A, hosting by us is optional; without it the cost stays at EUR 1,990. The three-year figure assumes care continues.

With a pilot: if you are unsure whether buyers, dealers and field sales will use the configurator, start with the EUR 2,900 pilot: one product family from your data in six weeks. If you order the configurator within 60 days afterwards, the full EUR 2,900 is credited. For the pavilion maker that gives EUR 2,900 + EUR 2,500 + 12 × EUR 199 = EUR 7,788 in year one: the same total, split into two decisions.

How do you keep the first scope small?

With buildings it is tempting to model everything at once. A better first release does one product family completely, with a list of what comes later. Typical items to defer:

  • Steel hall: grid, doors and enquiry first; the price band once the price table is clean.
  • Pavilion: the best-selling range first; more series once the table logic works.
  • Guard booth: standard plans first; custom sizes as a note rather than their own logic.
  • Restroom building: room schedule, floor plan and enquiry first; night view and exterior lighting later.
  • Site cabin: single units with use and wall grid first; stacking and the towable version as a second stage.

Each deferred feature becomes a small extension later. Whether it fits into monthly care or needs its own quote depends on its size.

Which questions should building manufacturers settle first?

The general checklist is in the cost guide. This product group adds questions that do not arise with small products:

  • Which values are approved? Grids, door sizes, stacking and transport rules concern how the building is made. They should come from approved documents that you as the manufacturer are responsible for with your structural engineer, not from workshops.
  • Does a price appear, and which one? Kit or installed, with or without delivery and base? That decides the price logic.
  • Sale, hire or both? For hire companies an enquiry is an availability question; a link to the fleet system would be a separate integration.
  • Who buys from you? Public bodies tend to use a configurator for early planning, commercial buyers to order. That changes fields and recipients.
  • Which units and languages? If you ship cabins or pavilions to markets using feet and inches, you need both units in interface, enquiry and PDF.
  • Where does it run? Website, dealer pages, a tablet at site visits, shows.

Template or custom build?

Template software exists for sheds, carports and pergolas; see configurator software for sheds, carports and pergolas. For the buildings in this group one question usually decides: can the template handle your logic, such as balanced room rows, a wall grid with blocks, stacking with a stair, or a size table with empty cells? If yes, it is faster. If not, a custom build is the remaining route.

What to send for a fixed-price quote

  • the grid or size table of the first product family;
  • photos, brochure pages or drawings of the visible components;
  • your rules in plain words and the approved limits;
  • one good and one bad enquiry from everyday work.

Only you see your files and work in progress, through private links; your product appears in our gallery only with your explicit permission.

Examples to try

Example configurator · fictional product

Steel hall configurator

Plan a steel hall: machine or riding hall, width, length and wall height with drag handles, snow zone, gates and light panels, colours – with a sample price band and a PDF enquiry.

Halls & large structures · Dimensions and sizes · Colours · Options, modules and accessories

Example configurator · fictional product

Timber pavilion configurator

Put together a timber pavilion: seven series, size by drag handle or input, gable or hip roof, knee braces, privacy slats, wood species and stain – with sample prices and a PDF enquiry.

Halls & large structures · Dimensions and sizes · Colours · Materials and finishes

Example configurator · fictional product

Guard booth configurator

Plan a guard or ticket booth: three styles, length and width, roof, door, cashier window and equipment, colours and glazing – with foundation and shipping checks and a PDF enquiry.

Pods & booths · Dimensions and sizes · Colours · Materials and finishes

Example configurator · fictional product

Prefab restroom building configurator

Plan a prefab restroom building for a park, campsite or trailhead: pick the rooms, set the layout, roof and facade, tap doors to open them – with a roof-off floor plan, a day/night view and a PDF enquiry.

Pods & booths · Dimensions and sizes · Colours · Materials and finishes

Example configurator · fictional product

Site cabin & welfare unit configurator

Plan a site cabin or welfare unit: length from 10 to 32 ft, use, windows and doors on a grid, tap rooms with the roof off, stack two high or make it towable – and close the site with one click: the shutters come down and the doors are barred.

Halls & large structures · Dimensions and sizes · Colours · Materials and finishes

More examples: the steel hall configurator and the guard booth configurator. For how a project runs, see 3D configurator development.

Send us one product family with its grid or size table – you get a proposal and a fixed-price quote.

Frequently asked questions

Why no prices for single features such as a floor plan or stacking?

Because they depend on everything else. A floor plan for a building with fixed room modules is a different job from one with free walls. The scope is in the fixed-price quote.

Are the three scenarios real projects?

No. They are invented to show the arithmetic with entry prices.

What happens to grids and models when the contract ends?

You receive your data and models as files (glTF, JSON).

Sources

  1. Modelwright, "How much does a 3D product configurator cost?" (package prices, pilot, care, contract end), read 14 November 2026: modelwright.de/en/guides/3d-configurator-cost/
  2. Features of the example configurators: "Live in this demo" lists on the linked library pages, read 14 November 2026.

Read next