Technology

Mobile hen house configurator rules: flock size, production system, axle and options

The rules behind a mobile hen house configurator: capacity per production system, model suggestion, axle and transport width, options per range, inputs.

Short answer: a mobile hen house configurator works with four groups of rules: capacity (does the flock fit the model in the chosen production system, and if not, which model does?), running gear (which axle exists for which model, and what width results?), equipment (which option exists for which range?) and inputs (whole birds, limits, a short text for the farm name). The figures behind them come from the manufacturer; the configurator only applies them.

Mobile hen house configurator – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

What is in the data?

Our example configurator uses a fictional product and example values; its library page lists four sample models with dimensions, organic or conventional stocking and a capacity check. For a manufacturer's configurator we propose this data model: each model carries its length, width, heights, tank volumes and one capacity figure per production system, plus any figure that an extension package unlocks. Models can be grouped into ranges, for example compact and large. Each option carries the range or model it is offered for and whether it is standard there. Changing a figure in that table changes the checks; nothing is calculated from first principles.

How does the capacity check decide?

We propose four outcomes:

Flock enteredResult
Up to the model's capacity for the chosen systemGreen, with the capacity figure
Above the standard figure but within the figure an extension package allowsA warning that the extension package from the option list raises the capacity
Above the model's capacityRed, naming the smallest model that takes the flock, with the package if needed
Above every modelRed, suggesting several houses or a direct enquiry to the manufacturer

The model suggestion is the useful part: buyers think in birds, not in model names. For your project we recommend one fixed rule: every capacity figure is stored with the source it rests on, such as the regulation or the interpretation you apply. EU organic rules contain a specific provision on mobile poultry houses [1], and national welfare rules apply alongside them [2]. When a rule changes, you change the figure; the configurator does not re-derive it. Responsibility for the figures stays with you as the manufacturer, and for husbandry with the farm.

How are axle and transport width handled?

The library page lists an axle with wide or narrow tyres and a transport-width check. As a rule we propose: a narrow axle and removable nests are offered only on the models that allow them, for example a compact range. If the buyer chooses a model without that option, the configurator switches the running gear and says why. The transport-width check shows the width that results from axle, nests and add-ons, and what to change to get narrower. Where that is not possible, it states the width and refers the buyer to the manufacturer.

The demo does not say what widths are allowed on public roads or under which conditions. If you want a note on that, the wording comes from you.

How are options tied to ranges?

When the buyer changes model, the configurator should check every selected option; anything not offered for the new model is deselected and named in a note. Options with a 3D part appear on the model, the rest as a list, as in the demo, and both go into the enquiry. Assumptions should be labelled too: if the position and size of a climate area on the model are only assumed, the summary should say so.

How does it treat inputs?

We propose two simple rules:

  • Hen count: whole birds only. Decimals are rounded and values outside the range are limited, each with a note.
  • Farm name: plain text with a length limit; a longer name is shortened and flagged. It appears on the side wall and in the enquiry as a proposal.

What does the animation show?

The library page lists a move-to-fresh-pasture animation. It shows the routine a buyer will live with: the house is moved onto fresh grass. That explains the point of a mobile house faster than a paragraph. With reduced motion set on the device, an animation like this should jump to the end state.

What data do you supply?

  • Models with dimensions and capacities per production system, with sources
  • Extension packages and their effect on capacity
  • Running gear and axles, with the widths that result
  • Nest systems, and which models they fit
  • Your option list, mapped to ranges, with what is standard
  • Colours, and any rules for lettering or logos

What comes out at the end?

The summary should list model, production system, flock size with the check result, dimensions, running gear, nests, options, colour and farm name, and end with a note on which figures are non-binding and that price and a profitability calculation are for the manufacturer to provide. The enquiry text can ask for the price list and a quote, and add short yes/no lines, for example whether the buyer is a farm, has kept hens before, and when the purchase is planned. In the demo, the enquiry text can be copied and downloaded as a PDF.

Example configurator · fictional product

Mobile hen house configurator

Plan a mobile hen house: four models, husbandry type and hen count with a capacity check, axle and transport width, nests, options and your own farm name – with a PDF enquiry.

Equestrian & livestock · Dimensions and sizes · Colours · Options, modules and accessories

Try it in the mobile hen house configurator. Who it is for is covered in mobile hen house configurator software. How the model, animation and phones are handled is in building a configurator for equestrian and livestock products. For hiring us, see custom 3D configurator development.

Frequently asked questions

Who updates capacity figures when rules change?

You approve the new figures and we enter them. Small changes are part of the monthly maintenance; the scope is set in the fixed-price quote.

Can it split a large flock across several houses?

A configurator can point large flocks to several houses or an enquiry. Splitting a flock across houses can be built in a project if you define the rules.

The demo shows text. An uploaded logo is possible in a project; file format, size and data protection are agreed first.

Sources

  1. Commission Implementing Regulation (EU) 2020/464 on the application of Regulation (EU) 2018/848, Article 15(6) on mobile poultry houses, German text as reproduced on gesetze.legal (read 14 November 2026): gesetze.legal/eu/vo_eu_2020_464/15
  2. Tierschutz-Nutztierhaltungsverordnung (German regulation on keeping farm animals), section 3 on laying hens, gesetze-im-internet.de (read 14 November 2026): gesetze-im-internet.de/tierschnutztv
  3. Modelwright library: mobile hen house configurator, "Live in this demo" list (read 14 November 2026): /en/library/mobile-hen-house-configurator/

Read next