Technology

Pool enclosure configurator rules: bays, stacking and fit check

How to write the rules for a telescopic pool enclosure configurator: length in bays, stacking and clear span, pool fit check, budget band and PDF.

Short answer: a telescopic pool enclosure can be described in a configurator with four groups of rules: size from segments (width, length in bays, wall height), opening and stacking (how much area opens up), a fit check (does the enclosure cover the pool?) and the output (budget band, enquiry text, PDF). Our example configurator shows these features; the rules below are our proposal for your range, not the demo's internal logic.

Retractable pool enclosure configurator – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

What is live in the demo, and what is a proposal?

The demo is an example configurator with a fictional product and example values. The left column lists what the library page shows as live. The right column describes how a manufacturer can write the rule for its own range.

Live in the demoProposal for your project
Free-standing or lean-to typeA width and height list per type; for lean-to, details of the wall as a required enquiry field
Width, length in bays, wall heightLength as a number of your segments, not a free figure; widths and wall heights from your grid
Pool size with a fit checkCheck: the enclosure's inside size minus your minimum margins must cover pool length and width; if not, a suggestion with more bays or the next width
Single or double stacking, eave, doors, sliding windows, motorOffer options only where your system allows them, for example doors only in certain bays
Open the roof, with the clear-sky spanClear length = total length minus the length of the stack of nested bays; two stacks for double stacking
Fictional sample budget band per areaYour range per m² or per bay, always labelled as a guide
Feet and inches or millimetresOne internal unit, converted for display only
Copy the enquiry text and a PDF quote sheetDelivery by email or webhook to your sales team

How is the size built from segments?

A telescopic enclosure is made of bays that slide into each other. So in the configurator, length should be chosen as a number of bays, not as a free figure. We suggest writing the rule like this:

  • Length = number of bays × bay length from your table.
  • Width from a list per type, because each bay has to nest inside the next and widths are therefore stepped.
  • Wall height from a list per type; low and tall versions are usually separate series.

Which bay counts, widths and heights are allowed comes from your system documents. The configurator only applies what you supply.

How is the opening described?

For the buyer, the key figure is not the length but how much sky opens up. The demo shows this with a button, a slider and a clear-span readout. For your own range, the clear length can be derived as total length minus the length of the stack the nested bays form. Single stacking gives one stack at one end; double stacking gives one at each end. The exact stack length depends on your bays and belongs in your table as a value.

A motor does not change this arithmetic; it is an option. Whether a motor is available at every size is for you to set.

How does a pool fit check work?

The prospect enters the pool size, and a fit check compares it with the chosen enclosure. For your range we suggest three outcomes:

  • Fits: the pool lies wholly inside the enclosure, with your minimum margins to the edge.
  • Tight: it fits, but below your recommended margin; a note for the survey.
  • Does not fit: with a suggestion, such as one more bay or the next width, that the buyer can apply in one click.

The check does not replace the site survey. It makes sure the enquiry includes the pool size and that clearly unsuitable sizes are not requested at all. It says nothing about foundations, loads or approvals; those are for the manufacturer, a structural engineer and the authority.

Glazing, frame colour and views

Roof and wall glazing and frame colours can be chosen in the demo. For your own range we suggest handling glazing per surface (roof, side walls, ends), because makers often offer different materials there. The 3/4, side and top views and a person for scale help the prospect judge height and size; the top view shows best whether the pool is covered.

Budget band, enquiry text and PDF

The demo shows a fictional budget band per area and offers enquiry text to copy plus a PDF quote sheet. For your project we recommend showing the budget as a range, never a single price, and labelling it clearly as a guide. The enquiry text and the PDF should carry the same rows in the same order: type, dimensions, bays, stacking, pool size with the check result, options, glazing, colour, budget band and contact details. A picture of the enclosure, open and closed, helps your estimators more than any description.

Example configurator · fictional product

Retractable pool enclosure configurator

Plan a retractable pool enclosure: free-standing or lean-to, width, length in bays, wall height, doors, windows and motor – with a pool fit check, an opening animation and a PDF enquiry.

Pool enclosures & covers · Dimensions and sizes · Colours · Materials and finishes

You can try the features in the pool enclosure configurator. Who such a configurator is for is covered in pool enclosure configurator software. How the opening animation, units and phone display are built is covered in implementing 3D configurators for outdoor structures. For the project itself, see custom 3D configurator development.

Frequently asked questions

Can a fit check handle round or free-form pools?

Yes, if the check uses the rectangle that encloses the pool. Free forms can be added as a project feature.

Should an unsuitable size be blocked?

We recommend a note with a suggestion rather than a block. The enquiry stays possible, and your sales team sees what needs discussing.

Sources

  1. Modelwright library, pool enclosure configurator: "Live in this demo" list, read 14 November 2026: modelwright.de/en/library/pool-enclosure-configurator/

Read next