Sales trailer counter, cooling and layout rules: the logic behind the configurator
The rules a sales trailer configurator needs: trade and body first, series or custom length, counter, cooling and devices on the rear wall, layout plan.
Short answer: a sales trailer configurator works in a fixed order. Trade and body decide which building blocks exist at all. The length decides how much rear wall and counter there is. Then come counter, refrigeration and devices, with a check that they fit the rear wall, followed by hatches and the look. At the end a layout plan makes the fit-out readable for your sales office. Our example configurator shows this chain with simplified sample values.
Why does the order of decisions matter?
In a sales vehicle every early decision narrows the later ones. A bakery counter only exists for bakery, a cab only for the self-propelled body, a long chest freezer only in a vehicle that is long enough. A configurator that offers everything at once produces combinations your sales team has to unpick afterwards. That is why the trade comes first.
| Step | Decision | What it narrows |
|---|---|---|
| 1 | Trade: meat, fish, bakery, snack | counter types, refrigeration, device list |
| 2 | Body: trailer or vehicle with cab | available models, outside dimensions, cab |
| 3 | Model by length or individual length | length of rear wall and counter |
| 4 | Counter, countertop, fridges, chest freezer, devices | use of the rear wall |
| 5 | Sales hatches and rear hatch | access and selling side |
| 6 | Company name, slogan, stripe colours, wrap | no technical limit |
All building blocks in the example are fictional. Which trades, bodies and models you offer is yours to define.
Series model or custom length?
If you build fixed models and also custom lengths, the configurator needs both. The example offers sample models by length and an individual length. For your range that means two kinds of data. Series models get fixed dimensions and a standard fit-out. Custom lengths get a range and a step size, and the rules for counter and rear wall work with whatever length is chosen.
The enquiry must say clearly whether a series model or a custom length was requested. It changes lead time and costing, so it belongs in the summary as its own line.
How is the rear wall checked?
Fridges, chest freezer and appliances stand behind the seller. The rule is an allocation: the widths of the chosen items must not exceed the usable length of the rear wall. You define what counts as usable, for example net of an area kept clear for the entrance and a hand-wash basin. The example configurator has this rear-wall fit check.
Further rules we would write down with a manufacturer in a project:
- counter types offered only from a certain length;
- under-counter refrigeration that takes no rear-wall space;
- chest freezers in fixed sizes that need space as one block;
- devices offered for one trade only.
These rules come from your planning. Whether a vehicle with this counter, refrigeration and freezer meets technical or food hygiene requirements is for the manufacturer to decide, not the configurator.
How should a limit be shown?
A rule is only as good as its feedback. When a chest freezer no longer fits the rear wall, the buyer should learn three things: what does not fit, by how much, and what they can do, such as removing a device or choosing a longer model. We recommend phrasing these messages in the buyer's language, not as error codes.
A second question is whether a fit-out that does not fit may still be enquired about. For sales vehicles there is a case for it: a business with an unusual wish can be a good prospect, and your sales team can look at a special solution. The message then belongs visibly in the summary so your office sees it at once. We settle this with you for your range.
Hatches and the two states of the vehicle
A sales vehicle has a travel state and a trading state. In the example an animation switches between the sales and travel positions, and sales hatches and a rear hatch can be chosen. For the buyer this is more than an effect: they see the vehicle both ready to travel and ready to trade, and where hatch, sign and name sit.
In a project your hatch types with their sizes are added, and the animation follows your mechanisms. It illustrates the sequence; it makes no statement about the function or safety of the mechanism.
Why a layout plan belongs in the enquiry
A picture shows how the vehicle looks. A layout plan shows where everything is. For your sales office that is the real working document: counter, refrigeration, freezer and devices in order, with length and hatch position. The example configurator produces enquiry text to copy and a 2-page PDF with a layout plan. In a project the enquiry goes to your sales team by email or webhook.
The example configurator
The sales trailer configurator is an example configurator by Modelwright with a fictional product; sizes, options and fit checks are simplified sample values and not a quote. What manufacturers use it for is covered in sales trailer configurator software.
Example configurator · fictional product
Sales trailer configurator
Fit out a sales trailer: trade and body, length, counter, cooling and equipment with a fit check, hatches, your own company name and wrap – with a layout-plan PDF.
What data you supply
For a configurator with your range we need your models with inside and outside dimensions per body, the allowed range for custom lengths, counters, refrigeration, freezers and devices per trade with their widths and positions, the area to keep clear on the rear wall, hatch types, colours and wraps, and your price rules if prices should appear. How that becomes a model in the browser is covered in building a 3D configurator for trailers and vehicle bodies. For hiring us, see custom 3D configurator development.
Frequently asked questions
Can it produce a bill of materials?
The demo produces a summary and a layout plan. A bill of materials with your part numbers is project work, set up from your data.
What happens when someone changes the trade?
The offered building blocks change. How your configurator treats items already chosen is decided in the project, and the change is shown visibly.


