Shepherd's hut configurator rules: access, length, width and layout
The rules a shepherd's hut configurator needs: models with minimum sizes, layouts by length, an access check, the pitch on site, heating and the enquiry.
Short answer: a shepherd's hut configurator needs rules in three areas: size and layout (which lengths and widths a model has, and which fit-out fits at which length), delivery (does the hut pass the narrowest point of the access route and fit the pitch?) and specification (heating, roof, extras). The delivery rule matters most, because it can stop a sale before it starts.
What does the buyer choose?
| Input | In the example | Proposed dependency |
|---|---|---|
| Model | S, M, L with fictional sample prices | Sets starting values and minimum sizes |
| Length, width | Standard steps | Drive layout, space needed and delivery width |
| Layout | Layout rules per size | Fit-out only from a minimum length |
| Roof | Curved or pitched | Changes overall height and look |
| Heating | Woodburner or electric radiator | Woodburner adds a flue to the model and a note |
| Extras | Extra window, 12 V solar kit | Window position per layout |
| Cladding, colours | Tin or weatherboard, inside and out | Colours per cladding |
| Pitch, access | Space length and depth, narrowest access | The basis of the delivery check |
This is an example configurator with a fictional product; all values are example values. The first two columns follow the "Live in this demo" list on the library page. The dependency column is our proposal for a manufacturer's configurator, not a description of the demo's logic.
How does layout depend on length?
In a shepherd's hut every centimetre is spoken for. A bed across the end, a desk, a kitchenette, a shower room: each needs length, and the door has to stay clear. We suggest describing each layout as a list of elements with a minimum length:
- Each layout has a minimum length. If the buyer picks a shorter hut, the layout cannot be chosen, with a note "from length X".
- Each model has minimum sizes. A model with a shower room exists only from a certain length and width. When the model changes, length and width move to the minimum with a note.
- The door follows the layout. An end or side door depends on where bed and kitchen sit. The configurator should not offer a door position that blocks the fit-out.
The library page says the demo works with length and width in standard steps with layout rules. Your own rules are for you to set; we write them down with you as condition, consequence and message.
How does the access check work?
According to the library page, the demo checks space length and depth in the garden and the narrowest access. For a project we propose this logic:
- Delivery width, not nominal width. What must pass the gate is the widest part: roof overhang, wheel arches, fittings. You supply that value per width and roof shape.
- Working allowance. A hut is not pushed through a gate to the millimetre. An allowance you set makes the check realistic.
- The pitch with everything that belongs to it. The drawbar and the steps stand in front of the hut. The space check should use the footprint with those parts and a clearance around it.
- A result with a suggestion. If the access is too narrow, the configurator states the shortfall and suggests the next narrower width, if there is one. If not, it points to a request for special delivery.
The check answers one question: is the width entered enough for your delivery dimensions? Bends, gradients, ground and overhead obstacles remain a matter for the site visit. Whether and how the hut may be moved on public roads is for you as the manufacturer to clarify; the configurator says nothing about it.
Why show a person and dimensions?
The library page lists 3/4, side and plan views with person and dimension overlays, plus a cut-away animation to look inside. For the rules this is more than presentation: when length or layout changes, the buyer sees in the plan what moves, and from the person how tall the interior feels. For your project we recommend showing the same dimensions that appear in the enquiry, so the view and the PDF never disagree.
Which specification rules are there?
Heating is a basic decision. When the woodburner is chosen, the flue belongs in the model, and the configurator can show a note you write, for example about requirements on site. With the electric radiator, the enquiry should record that power is needed at the pitch. A 12 V solar kit is an option for sites without a mains connection; whether it covers the need is not something the configurator says. It records the choice, and your team advises.
The example offers two cladding types and colours for inside and out. In your project it may make sense to offer certain colours only with one cladding; that is a simple mapping rule.
What data do you supply?
Your models with lengths, widths and minimum sizes, your layouts with minimum lengths, delivery dimensions per width and roof shape, the working allowance for access, heating and extras with your notes, cladding and colours, and the details your sales team needs to quote.
What comes out at the end
The enquiry should state model, length, width, layout, roof, heating, extras, cladding and colours, plus the pitch and access dimensions and the result of the check. In the demo the enquiry text can be copied and a PDF summary downloaded; in a project it goes to your sales team by email or webhook.
Example configurator · fictional product
Shepherd’s hut configurator
Put together a shepherd’s hut: model, length and width, roof, heating, cladding and colours – with a garden fit check, a look inside and a PDF enquiry.
Try it in the shepherd's hut configurator. Who such a configurator is for is covered in shepherd's hut configurator software. How the cut-away and the views are implemented is covered in implementing garden building and sauna configurators. For hiring us, see custom 3D configurator development.
Frequently asked questions
Can buyers draw their own layout?
That would be a planner with free furnishing and many more rules. For many makers, fixed layouts per length are enough; special wishes come as an enquiry.
Are the demo's values general?
No. They are example values. In your project your dimensions and allowances apply.
Does the configurator check whether a woodburner is allowed?
No. It shows your note. Whether and how a stove may be used on site is for the manufacturer and the buyer to clarify with the relevant authorities.
Sources
- Modelwright library: shepherd's hut configurator, "Live in this demo" list, read 14 November 2026: /en/library/shepherds-hut-configurator/


