Staircase configurator for straight, L and U stairs: features, benefits, build
What a 3D staircase configurator for stair makers should do: shape, floor height, steps, headroom, construction and a PDF enquiry. With an example demo.
Short answer: a staircase configurator for straight, L and U stairs is worth building for stair makers when it does more than show materials. It takes the floor-to-floor height, floor thickness, stair width and the space along the wall, works out the steps and the run, checks the headroom at the floor opening and suggests another shape when a straight stair does not fit. It ends in an enquiry with every dimension and a PDF. Whether the stair may be built that way is still decided by you, the designer and the applicable building rules.
Who is this staircase configurator for?
This guide is for owners, sales and product leads at stair makers, joinery workshops and metalworkers who build timber, steel and mixed stairs between two floors, and for dealers who sell and install them. Their enquiries come from homeowners, architects, developers and contractors working on refurbishments.
If you make spiral and space-saving stairs, the guide Staircase configurator for spiral stair manufacturers covers what is special about that product. This one is about straight flights and stairs with a quarter or half turn.
Why do straight, L and U stairs need their own configurator?
- The shape follows the space. A straight stair needs length along the wall. Where that is missing it becomes an L or U stair, with a landing or winders, turning left or right. Buyers often do not know which shape fits their room.
- The steps follow the floor height. The height from finished floor to finished floor sets the number of risers, the rise and the going, and from those the length of the run. Change the height by a few centimetres and the whole stair changes.
- The floor opening matters as much. If the opening is too short, people hit their head on the edge of the floor above. A photo does not show that, and in conversation it can easily come up only at the site survey.
- The design is the buying decision. Closed or open stringers, cantilevered treads or folded plate, timber or steel, glass or bars: this is where makers differ and where buyers compare.
A catalogue shows the design. It does not show whether the chosen stair fits the height, the length and the opening on site. A configurator that calculates and shows the result in the model at once closes that gap.
Which features does it need, and what does our example show?
| Feature | Why | In the example configurator |
|---|---|---|
| Shapes: straight, L (quarter turn), U (half turn); landing or winders; left or right | match the room | yes |
| Site sizes: floor-to-floor height, floor thickness, stair width, available length, length of the floor opening | the inputs everything is calculated from | yes, with plus/minus and typed input; stair width chosen from five sizes |
| Live step calculation: risers, rise, going, step length, pitch, run | make the sizes traceable | yes, as an example calculation with example ranges |
| Headroom at the floor opening with a suggested opening length | see conflicts before the survey | yes, green or red in the model |
| Length check with an L or U suggestion | find the shape that fits | yes, applied with one click |
| Construction, risers, tread material, balustrade, handrail, colour | show the range | yes |
| Review, enquiry text, PDF | an enquiry without follow-up calls | yes; sending is set up per project |
| Your prices | give a price range | no, per project |
What does it bring to sales?
We do not promise figures. The benefit lies in work that is done twice today between enquiry and quote:
- The enquiry arrives with sizes. Floor height, floor thickness, stair width, space along the wall and opening length are in the enquiry, together with the step calculation, rather than being asked for after the first call.
- The shape is settled early. When the straight stair is too long, the buyer sees it and is offered an L or U stair that fits the space.
- The floor opening is discussed before it is built. In new builds an opening can still be changed. The configurator shows where it gets tight and names a length that works in the example.
- Comparable enquiries. Every enquiry has the same structure, whether it comes from a homeowner, an architect or a dealer.
How such an enquiry turns into a site survey and a quote is covered in From configurator to site survey.
Example: our staircase configurator
The staircase configurator for straight, L and U stairs is an example configurator by Modelwright with a fictional product. All sizes, ranges and rules are example values; the calculation is not a building-regulation check, and the demo makes no statement on structure, load capacity or standards. By default it shows a straight stair with closed stringers at a floor-to-floor height of 2.80 m: the demo works out 16 risers of 175 mm and 15 treads with a 280 mm going, a 4.20 m run, and sets the floor opening to 3.75 m automatically.
Enter only 3.00 m of available length and the length check turns red; the demo suggests an L stair that needs 2,960 mm along the wall with a landing. One click applies it. Shorten the floor opening and the headroom turns red, the headroom view shows the conflict point on the edge of the floor above, and a suggestion names the opening length that meets the example rule again. "Walk up" takes the camera up the stair at eye height, and it ducks where headroom is missing.
There are four construction types (closed stringer, open cut stringer, cantilevered wall-mounted treads for the straight stair only, folded steel plate), open or closed risers, treads in oak, ash, stone look or steel, a balustrade with vertical bars, horizontal bars or glass, also around the floor opening, and a wall handrail. The review lists the example calculation and the checks, followed by an enquiry text to copy and a PDF with a 3/4 and a side view. The demo does not send the enquiry; in a project it goes to your sales team by email or into your CRM.
Tested: an independent test run went through the full journey on seven emulated screen sizes from 360 px to desktop and passed 58 of 58 steps on each. Real phones were not tested.
Example configurator · fictional product
Staircase configurator: straight, L and U stairs
Plan a straight, L or U stair: enter the floor height, see rise, going and step length live as an example calculation, check the headroom at the floor opening and walk up the stair in 3D.
How rise, going, step length and headroom are calculated in the example is covered in Rise, going and headroom logic.
How is it built for your range?
For your range we build the configurator with your stair shapes and turn options, your width and step tables, your construction types, materials, balustrades and handrails, your planning values for rise, going and headroom, your enquiry route and, if you want, your prices. The demo's example ranges are replaced by your own values and stay labelled as your planning values, not as a building-regulation check. The cost of stair and balcony projects is covered in What does a stair or balcony configurator cost?, and the project process in 3D configurator development.
Frequently asked questions
Does the configurator check whether the stair meets the building rules?
No. The demo calculates with example values and says so in the interface, the enquiry text and the PDF. Which sizes apply to a project is for you to agree with the designer and the local rules. In a project we build your own planning values in as rules.
Can it show winders instead of a landing?
Yes. In the example the L stair has three winders and the U stair six. With winders the going is measured on the walking line, and the demo notes that it is much smaller on the narrow side. Your own winder layout can be set up in a project.
Can it show prices?
The demo shows none. Prices per shape, width, construction and material can be added in a project if you want buyers to see them.
Sources
- Demo features: "Live in this demo" list on the staircase configurator library page, read 15 November 2026: modelwright.de/en/library/staircase-configurator/
- Rules, default set-up and suggestions: demo source code (data.js, app.js) and schema notes; test results: QA log of 15 November 2026, independent round, emulated devices.


