Technology

Steel hall configurator: sizes, doors and price band as rules

How a steel building configurator turns building type, grid sizes, doors, snow zone, buyer wishes and a price band into rules, and what data you supply.

Short answer: a steel hall configurator puts decisions in a fixed order: building type first, then span, length and eaves height on your system's grid, then doors and light panels, then cladding and colours. Two inputs run alongside that the configurator records but does not judge: the site with its snow zone, and the buyer's wishes for the quote. A price band can follow from size and type if you supply a price table. Our example configurator includes these decisions with example values.

Steel hall configurator – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

In what order is a steel building configured?

The order is not a matter of taste. Each step limits what the next one can offer:

  1. Building type. It sets the standard specification, doors and cladding. The example has a machinery shed and a riding arena.
  2. Dimensions. Width, length and wall height, set with drag handles on the model in the example.
  3. Openings. Sliding doors, personnel doors and light panels.
  4. Site and wishes. Snow zone, insulation, erection, foundation, solar.
  5. Finishes. Cladding and RAL colours for roof, walls and trims.
  6. Review and enquiry. Everything as text and PDF.

Reverse the order, colours before size for example, and you get enquiries in which the colour is fixed but the building is not.

How are dimensions kept on the grid?

Steel buildings come in steps: spans from a list, lengths in multiples of the bay spacing, eaves heights in fixed increments. A configurator should therefore not accept any number but snap to the nearest valid value. On the model, the drag handle clicks into place, and the dimension readout always shows a size your system knows.

For your range we need three lists per building range, with their limits:

DimensionWhat you supplyTypical dependency
Span (width)allowed spans per rangeframe, roof area and possible door widths in the gable
Lengthbay spacing and maximum lengthnumber of bays and room for doors on the long side
Eaves heightsteps per rangedoor height, ridge height and cladding area

The right-hand column lists dependencies we typically record in projects. Which ones apply to your system is your decision.

How do doors and light panels depend on size?

A sliding door needs wall beside the opening to slide onto. A building with a short gable wall therefore offers fewer door widths than a wide one. Rules like this can be written as conditions: "door width plus slide-back space no more than the wall length", or "two doors on the long side only from a minimum length". The configurator then offers only combinations that fit, or explains why a choice is not available.

In the demo you pick sliding doors, personnel doors and light panels. For your range we write the door rules with your sales team, using your door sizes and minimum dimensions from your documents, not assumptions of our own.

What does the configurator do with the snow zone?

The snow zone is a fact about the site. In the example the buyer selects it and the model shows snow on the roof. That is an illustration, not a calculation: the library page labels the snow zone and price band as fictional sample values, "not a structural design and not a quote" [1].

The same applies to a real product. Which snow load applies at the site, and how frame and foundations are designed for it, is decided by you as the manufacturer with your structural engineer. The configurator only makes sure the information is in the enquiry instead of being asked for in the third phone call. A note next to the field telling buyers where to look up their zone is useful.

Why wishes sit apart from the configuration

Insulation, erection, foundation and solar are "wishes for the quote" in the demo. The separation is deliberate: the buyer says what they have in mind, and your adviser checks what is possible. Ticking solar is a question to you, not a commitment by the configurator. In the enquiry the wishes should therefore sit in their own block.

How is a price band built?

The demo shows a fictional sample price band. For your range there are three options we set up per project:

  • Price per table size. You supply prices for the sizes you also print in the brochure. The configurator shows the price when the chosen size is in the table.
  • Band between table sizes. If the choice falls between two table sizes, a band appears instead of a single figure.
  • No price, only a note. Outside the table, the configurator says "price from your adviser".

All three are labelled as guidance. Whether prices show with or without VAT, erection and delivery belongs in the same table.

What data do you supply?

  • span, length and height grids per building range, with minimum and maximum values;
  • door sizes with the wall space they need and where they are allowed;
  • light panels, cladding types and the colour palette per part;
  • the price table, if a price should appear, and what it includes;
  • the questions your adviser always asks in the first call; these become the wish fields.

If a rule only exists in people's heads, we write it down with your sales team as condition, consequence and message. Values that affect load-bearing capacity are taken only from your approved documents.

What comes out at the end

At the end, the configuration is available as enquiry text to copy and as a PDF [1]. Which lines your enquiry carries is set in the project; building type, dimensions, openings, site, wishes, colours and, if shown, the price guidance are a sensible start. The demo does not send the enquiry; in a project the enquiry goes to your sales team by email or webhook.

Example configurator · fictional product

Steel hall configurator

Plan a steel hall: machine or riding hall, width, length and wall height with drag handles, snow zone, gates and light panels, colours – with a sample price band and a PDF enquiry.

Halls & large structures · Dimensions and sizes · Colours · Options, modules and accessories

Try it in the steel hall configurator. Who benefits from such a configurator is covered in steel building configurator for manufacturers. How models and data are built is in building a configurator for halls and modular buildings, and the project process in 3D configurator development.

Send us your grid sizes, door sizes and price table.

Frequently asked questions

Can buyers type any size?

You can allow it. We recommend rounding free input to the nearest grid value and noting that in the enquiry.

Are the demo values general?

No. Sizes, snow zones and prices are example values for a fictional product. In a project your tables apply.

Who maintains the price table after launch?

Small changes such as new prices are part of our monthly care. We do not offer a self-service editor as standard.

Sources

  1. Modelwright library, steel hall configurator, "Live in this demo" list and note on snow zone and price band, read 14 November 2026: modelwright.de/en/library/steel-hall-configurator/

Read next