Industries & use cases

Window configurator software for window makers and profile system suppliers

What window configurator software should do for fabricators, profile system suppliers and dealers, where 3D helps, and what a custom build involves.

Short answer: window configurator software does two different jobs. One is explaining the product: how each opening type moves and what is inside the profile. The other is collecting a priced or quotable order: many positions, each with size, opening type, finish and glass. 3D is strongest at the first job. The second needs your size limits, your rules and an enquiry your estimating team can work from.

This guide is for owners, sales and product managers at window and door fabricators, profile system suppliers and the dealers who sell their windows.

Window and door configurator – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

Which job should your window configurator do?

Before comparing software, decide which of these you need. They lead to very different projects:

JobTypical userWhat it needs
Explain the systemProfile supplier, marketing, trade fair standOpening types in motion, a profile section, finishes
Support the dealer conversationShowroom, field sales, installerSide-by-side variants: material, inside and outside colour, glazing bars
Collect an order or enquiryHomeowner, contractor, inside salesSeveral positions with sizes and specifications, sent as one enquiry

Some window makers already run estimating or manufacturing software that holds the real rules. In that case the question is not "which configurator replaces it" but "what sits in front of it": a visual layer that shows the product and passes a clean list of positions on.

Where 3D helps with windows

Opening types differ mostly in movement. A tilt-and-turn sash, a double sash without a mullion and a lift-and-slide door look similar in a drawing and very different when they open. A profile section is the other case: a dealer understands chambers, reinforcement and gaskets faster in a cut-away than on a technical sheet. For a profile system supplier that sells through fabricators, a shareable 3D view lets every fabricator show the system without carrying samples.

What 3D does not do on its own is make an order valid. That still depends on rules.

An example configurator you can try

Our window configurator is an example configurator with a fictional window system and example values; no manufacturer ordered, reviewed or endorsed it. As listed on its library page and visible in the demo, it covers:

  • five opening types: fixed, tilt-and-turn, tilt, double sash and lift-and-slide door;
  • width and height, and PVC or aluminium;
  • four colours (white, anthracite, jet black, golden oak decor), set separately for inside and outside;
  • glazing bars, and the sash closed, tilted or open;
  • a profile section, labelled in the demo as illustrative and not a real system.

Example configurator · fictional product

Window and door configurator

A window and door system: fixed, tilt-and-turn, double sash or lift-and-slide door, width and height, material, colour and glazing bars – with opening and a profile section.

Doors & openings · Dimensions and sizes · Colours · Materials and finishes

Just as important is what it does not have: no enquiry, no price, no checks and no list of positions. It covers the first job in the table above. Everything beyond that is described here as a proposal for your project, not a feature of the demo. The parameters and size ranges it does use are explained in opening types, size ranges and the profile section.

What we would add in a project

For a window configurator that produces enquiries, a project would typically add (proposed, not in the demo):

  1. A list of positions: configure one window after another, each with size, opening type, handing, finish and quantity.
  2. Your size limits per opening type and profile system, taken from your manufacturing data.
  3. Glass and hardware rules: which glazing, security fittings and handles are possible at which size, mirroring what your estimating software already knows.
  4. An enquiry with every position as text and PDF, by email or webhook to inside sales or a dealer.
  5. Performance values only from you: thermal or other figures appear only if you supply and stand behind them.

How enquiries reach dealers and installers, and where the site survey fits, is covered in From configuration to site survey.

Profile supplier or fabricator: two different projects

For a profile system supplier, the configurator is mainly an explainer used by many fabricators, so it should embed in their websites and stay neutral on price. For a fabricator selling direct or through dealers, the enquiry comes first: a contractor enters several windows and your estimators receive a list they can price without calling back. Both can share one 3D model, but scope, rules and the enquiry route differ, so decide who the configurator is for before you scope it.

How vendors frame it

Threekit titles its door and window industry page "Door and Window Quoting for Reps and Dealers" and says reps and dealers need to establish swing, hinge side and the opening requirements before choosing the unit [1]. That is the vendor's own description, and the page publishes no price. It shows where this vendor puts the value: in quoting through reps and dealers, not in the picture alone. If you sell through dealers, ask any vendor how a dealer's configured list reaches your estimating team, and whether your rules then live in two places.

Custom build or platform?

A platform is quicker if your range fits its model of a window. A custom build pays off when your profile, your opening types or your dealer process are your own, or when the configurator has to sit in your existing website in your design. We build the visible part: the 3D model, the rules you give us and the enquiry. Binding prices and quote documents stay in your systems; ERP integration is not standard and is assessed case by case. For how we work, see custom 3D configurator development.

What to send us

  • Profile sections as drawings, and views of each opening type.
  • Your size tables per opening type and system.
  • Colour and finish list, with inside/outside combinations you offer.
  • CAD data if available; we check before the start whether it suits the web. Multi-chamber profiles are simplified for display.

Sources

  1. Threekit, Door and Window Quoting for Reps and Dealers, vendor statement, read 14 November 2026: threekit.com

Read next