Technology

Opening types, size ranges and the profile section: the logic of a window configurator

How a window configurator holds opening types, size ranges, materials and colours as data, what the example demo implements and which rules a project adds.

Short answer: in a window configurator the opening type is the master rule. It sets the size range, the way the sash moves and which further options apply. Material and colour barely depend on it; glass, hardware and order positions depend on it a lot. Our example configurator implements the first layer. The second layer belongs in a project built on your data.

Window and door configurator – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

What does a window configurator need to know?

A single window needs few parameters: opening type, width, height, profile system, inside colour, outside colour and glazing bars. Two more parameters change nothing about the product but explain a great deal: the sash position and the profile section. Keeping these apart matters for the data model, because product parameters go into an enquiry and display parameters do not.

ParameterKindIn the example configurator
Opening typeproductfixed, tilt-and-turn, tilt, double sash, lift-and-slide door
Width, heightproductsliders, range set by the opening type
Profile systemproductPVC or aluminium
Inside and outside colourproductfour colours each, chosen separately
Glazing barsproducton or off
Sash positiondisplayclosed, tilted, open
Profile sectiondisplayon or off, with labels

The core rule: a size range per opening type

In the window example configurator, each opening type has its own size range and starting size. These are example values for a fictional system:

Opening typeWidthHeight
Tilt-and-turn0.60 to 1.40 m0.60 to 1.90 m
Tilt only0.50 to 1.40 m0.40 to 1.20 m
Fixed glazing0.40 to 2.60 m0.40 to 2.40 m
Double sash (no mullion)1.00 to 2.40 m0.80 to 1.90 m
Lift-and-slide door2.20 to 4.20 m2.00 to 2.60 m

Switching the opening type resets the element to that type's starting size; within a type, width and height stay inside its range. A door-sized tilt-and-turn sash simply cannot be configured. For your range this table becomes your manufacturing limits, possibly split by profile system.

Motion and section as explanation

The sash position shows how each type moves: a tilt-and-turn sash tilts or turns, and for the lift-and-slide door "tilted" means half open. The profile section cuts the element and labels its parts, such as the multi-chamber profile, steel reinforcement, centre gasket and triple glazing. The demo labels this section "illustrative, not a real system". That is the right way to treat performance data: a configurator shows technical properties only as the manufacturer supplies and stands behind them.

Example configurator · fictional product

Window and door configurator

A window and door system: fixed, tilt-and-turn, double sash or lift-and-slide door, width and height, material, colour and glazing bars – with opening and a profile section.

Doors & openings · Dimensions and sizes · Colours · Materials and finishes

Parametric geometry instead of a model per size

The window in the demo is generated at runtime: frame, sash and glass are built from width, height and the profile cross-section rather than stored as separate models for each size. That keeps the download small and allows any size within the range (in 1 cm steps in the demo). The wider implementation choices for doors, gates and windows (geometry from size tables, opening paths, section views, mobile and maintenance) are covered in implementation decisions for door, gate and window configurators.

What the demo does not implement

The example configurator is a variant viewer. It has no enquiry, no prices, no checks and no list of positions. Handing, glass build-up, handles and security fittings cannot be chosen. This older demo is also limited on phones, so we describe it on desktop only.

Rules a project would add

A configurator that should produce enquiries needs a second layer of rules. Typical rows we would write down with you (proposed, not in the demo):

ConditionConsequence
Sash larger than your limit for a hardware setsuggest another hardware set or opening type
A specific glass type selectedallow only matching profile systems and sizes
Glazing bars selectedshow only the bar types that suit the glass
Outside colour differs from insideflag as a two-colour specification in the enquiry
Several windowsa position list with a quantity per position

Decide early where these rules are maintained. If your estimating or manufacturing software already holds them, the configurator should follow that source rather than keep a second copy that drifts. A rule table like this also serves as the acceptance test: each row becomes one test case.

Proposed: a data model for the enquiry

If the configurator is to produce enquiries, every position needs the same fields so your estimators can import them. A suggested set (not implemented in the demo):

  • position number and quantity;
  • opening type and handing, named unambiguously;
  • width and height, stating whether they are structural opening or order sizes;
  • profile system and inside and outside finish, under your article names;
  • glass, hardware and glazing bars, chosen only from valid combinations;
  • a view of the position rendered from the 3D model for the PDF.

Leaving open whether the opening size or the order size is meant easily leads to queries, so the configurator should ask for it explicitly. How the list reaches your software (email, webhook or a file) is settled in the project.

Next step

The business case for fabricators, profile suppliers and dealers is in window configurator software for window makers. How we build configurators is described on custom 3D configurator development.

Frequently asked questions

How many 3D models does a window configurator need?

With a parametric build, one per profile system and opening type, not one per size. Sizes come from the rules.

Can it show thermal values?

Only from your documents. The demo shows no performance values; its profile section is illustrative.

Sources

  1. Example configurator: feature list on the library page and the model's source file (Modelwright, 14 November 2026)

Read next