Technology

Barrel sauna configurator rules: length, porch, heater and fit

Rules for a barrel sauna configurator: shapes and lengths, porch split, windows and back walls, heater, feet and millimetres, and the fit check.

Short answer: a barrel sauna configurator needs four groups of rules: shape (which lengths, windows and back walls each shape offers), split (from which length a porch is possible and how much sauna room is left), specification (what a wood-burning or electric heater and the timber change) and space (does the footprint fit the spot?). Each rule can be written down as a condition, a consequence and a message before any 3D model is built.

Barrel sauna configurator – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

What are the parameters of a barrel sauna?

A barrel sauna is described by only a handful of inputs. The hard part is not their number but the way they depend on each other. In the example configurator they are:

ParameterIn the exampleDependency (proposed)
ShapeBarrel, barrel with panorama window, cabinSets the length list, back walls, and whether a porch and front windows are possible
Nominal lengthA list of nominal lengthsOwn list per shape; porch only from a minimum length
SplitPorch and sauna roomSauna room = length minus porch; porch sizes per length
Front windowsOptionsOnly on shapes with a window front
Back wallOptionsOwn choice per shape
HeaterWood or electricWood heater with a flue on the model and its own line in the enquiry
TimberWhite or red cedarMaterial colour; in a project possibly a surcharge
Your spotThe chosen spotBasis of the fit check
Unitsft/in or mmDisplay only; one unit internally

All values are example values for a fictional product. The first two columns follow the list on the library page; the dependency column is a proposal for how a manufacturer can write down its rules, not a description of the demo's logic.

How should length and porch be handled?

Length matters most because it sets room, price and footprint at once. We propose three rules:

  • Nominal lengths, not free input. If you build to fixed length steps, the configurator offers only those and shows them in the unit your market thinks in.
  • A porch from a minimum length. Below a length you set, there is no porch. If someone shortens the sauna, the porch is dropped with a message rather than vanishing silently.
  • Sauna room as a result, not an input. The split is chosen as a porch length; the sauna room follows. A worked example with freely chosen figures, not demo values: a 2.7 m nominal length with a 0.6 m porch leaves 2.1 m of sauna room, before the partition is taken off. Which wall and bench sizes you deduct is up to you.

Which options does the shape rule out?

Not every back wall or window suits every shape. One example of such a rule: if a shape has a fully glazed back, the configurator can hide front windows and the porch for that shape. When the buyer switches back to the closed barrel, the options return, and an earlier choice is either restored or reset with a message.

What matters is that such rules live in one place. If a length applies to only two of three shapes, that fact must not be maintained separately in the interface, the 3D model and the enquiry. How your drawings and CAD files become the web model is covered in CAD to web 3D configurators.

What does the heater choice change?

The library page lists a wood or electric heater and a light-the-stove animation. For a maker's configurator we suggest that the heater choice changes three things: the model (heater inside, and the flue for a wood heater), the text under the choice, and its own line in the enquiry. Whether a wood heater is allowed at the planned spot, and which clearances and connection it needs, is not something the configurator decides. Those questions are for the manufacturer, the installer and, where relevant, the local authorities. A configurator can only point to them with a note that you write.

How does the footprint fit check work?

According to the library page, the demo checks the footprint against your spot, as a simplified sample value. A simple version of the check, as we would propose it for your configurator: the buyer enters the length and width of the spot, the configurator compares them with the footprint of the chosen sauna and reports "fits", "fits if turned" or "does not fit". If it does not fit, it can name the longest nominal length that would.

That is all such a check does. Distances to buildings, boundaries and trees, the base and the access for delivery are still for planning on site.

How should feet and millimetres be handled?

The demo has an ft/in and mm toggle. For a range that is named in feet and built in millimetres we recommend maintaining each value once, in millimetres, and converting for display. Nominal lengths keep their sales name, such as "8 ft", even when the metric size is not exactly eight feet. That way the catalogue, the configurator and the enquiry use the same names.

What data do you supply?

For a configurator with your range we need: shapes with cross-section, nominal lengths and outside sizes, porch rules, windows and back walls per shape, heaters with your wording, timbers with photos or samples, your list of what is included, and your enquiry route. Where a rule is not written down, we write it down with your sales team.

What comes out at the end

The enquiry should list shape, nominal length, split, windows, back wall, heater, timber and the spot size entered, in a fixed order and in both units if you sell internationally. In the demo the quote request text can be copied and downloaded as a PDF. In a project it goes to your sales team by email or webhook.

Example configurator · fictional product

Barrel sauna configurator

Put together a barrel sauna: shape, length with porch, windows, wood or electric heater and timber – with a look inside, a fit check and a PDF enquiry.

Saunas & hot tubs · Dimensions and sizes · Materials and finishes · Options, modules and accessories

You can try this in the barrel sauna configurator. Who such a configurator suits is covered in barrel sauna configurator software. For hiring us, see custom 3D configurator development.

Frequently asked questions

Are the demo's lengths and limits generally valid?

No. They are example values for a fictional product. In a project your lengths, splits and exclusions apply.

What about custom lengths?

The configurator covers your standard steps. Special requests can go into the enquiry as free text or as an option such as "ask for a custom size".

Does the configurator check rules for heaters or siting?

No. It reflects your product rules. Fire safety, clearances, connections and permits remain with the manufacturer and the installer.

Sources

  1. Modelwright library: barrel sauna configurator, "Live in this demo" list (read 14 November 2026): /en/library/barrel-sauna-configurator/

Read next