Industries & use cases

Booth and banquette configurator for contract seating makers: features, benefits, build

What a 3D booth and banquette configurator needs for restaurant seating makers: layouts, run length, backs, cover count, aisle check and a PDF enquiry.

Short answer: a booth seating configurator is worth building for contract upholstery makers when it puts the banquette into the room rather than just showing fabrics: layout and run length, back, plinth and cover, plus the number of covers and the clear aisle in plan view. It should end in an enquiry with sizes, check results and a PDF, so your estimators can price the job without first reconstructing the room over the phone.

This guide is for managing directors, sales and product leads at makers of wall banquettes, corner seating and booths for restaurants, cafés, bars, hotel lobbies and staff canteens, and for fit-out contractors who plan and install them. Enquiries come from operators, interior designers, hospitality consultants and shopfitters fitting out a space with fixed seating.

Booth & banquette seating configurator – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

Why is banquette seating different from loose furniture?

A chair has a size; a banquette has a length, and the length belongs to the room. That changes what the buyer needs to see:

  • Length comes from the wall. A wall banquette runs corner to corner, a U-booth fills an alcove. Buyers think in metres of wall, not in modules.
  • Covers follow from length. How many guests a run seats depends on the seat width allowed per guest; in a booth, both benches count.
  • Seating eats into room depth. Bench depth, table and the aisle behind must fit the room. If the aisle gets too narrow, the plan does not work.
  • Design is the range. Back height up to a privacy screen, channel or diamond tufting, plinth, end panels and cover are how operators recognise and choose a range.

A brochure shows the design. It cannot show whether the seating fits or how many people it will hold. That is the gap a configurator closes.

Which features are needed, and what does our example show?

FeatureWhyIn the example configurator
Single booth, booth row, L-corner, U-booth, curved booth, wall banquettematch the room situationyes, six layouts
Run length, side length, booth count; seat height, seat depth, table heightsizes you actually makeyes; lengths with steppers and typed input, booth count, heights and seat depth as choices
Room check: covers and clear aisle in plan viewfeasibility before the site visityes, red warning below an example minimum
Seat and table height in profilecheck heights togetheryes, with a seated figure
Back, tufting, plinth, ends, top, cover, piping, tablesshow the rangeyes
Review, enquiry text, PDF with 3D view and planenquiry without call-backsyes; sending is set up in a project
Your pricesprice per module or metreno, a project feature

What do makers gain?

We do not promise figures. The gains are in work that is currently done twice on most projects:

  • The enquiry arrives with the room. Run length, room depth, aisle and cover count are in it, rather than chased after the first call.
  • Problems show early. If a U-booth squeezes the aisle, the designer sees it in plan and can shorten the sides or pick another layout.
  • Design narrowed down before the sample case. Back height, tufting and cover colour are visible on the model. The physical swatch still decides, because screen colour is only approximate.
  • Comparable enquiries. Every enquiry follows the same structure.

Try the example

Our booth and banquette configurator is an example configurator with a fictional product and example values, built by Modelwright. All sizes, cover counts, aisle widths and checks are example values, and it makes no statement on standards, fire safety or escape routes. By default it shows two booths back to back with 1.40 m benches in a room 4.20 m deep: the demo counts 8 covers and a 2.80 m clear aisle. Switch to the U-booth, reduce the room depth to 3.00 m and raise the example minimum from 0.90 m to 1.20 m, and the aisle turns red: 1.10 m clear.

Around that sit back heights up to a privacy screen, plain, channelled or diamond-tufted backs, three plinth types, three end-panel types, a slatted screen or planter on free-standing backs, woven fabric or faux leather in 15 colours with self or contrast piping, and pedestal or two-pillar tables. It ends with a review of every value and check, an enquiry text to copy and a two-page PDF with a 3D view and the plan. The demo does not send the enquiry; in a project it goes to your sales team by email or webhook.

Tested: an independent QA round ran the full journey at seven emulated screen sizes from 360 px phones to desktop, passing 52 of 52 steps on each. No physical phones were tested.

Example configurator · fictional product

Booth & banquette seating configurator

Plan restaurant banquettes and booths: choose layout, length, back and cover, and see in plan at once how many covers fit and whether the aisle stays wide enough.

Furniture in the buyer’s room · Dimensions and sizes · Layout and planning · Options, modules and accessories

How covers, bench depth and aisle width are calculated is explained in banquette cover count and aisle check.

How would it be built for your range?

For your product we build it with your models and module lengths, your back and stitching variants, plinths and end panels, your fabric and vinyl books, your planning values for covers and aisles, your enquiry route and, if you want them, your prices. The model is built from your dimensions and drawings, not from a stock model. Who should receive the enquiry in contract work is covered in furniture configurator enquiries and dealers; what drives the effort in furniture configurator cost. For hiring us, see custom 3D configurator development.

Frequently asked questions

Does it replace the hospitality designer's plan?

No. It produces a complete enquiry with sizes and check results. Which aisle widths and escape routes apply on site is for the designer and operator to decide; your own planning values are what we build in as rules.

Can it use fixed module lengths instead of free lengths?

Yes. The demo takes free lengths: the steppers move in 100 mm increments and typed values are rounded to 50 mm. In a project your module lengths replace those free lengths, and long runs are split into your seat and back modules.

Can it show prices?

The demo shows none. A price table per module or per running metre can be added in a project if you want buyers to see prices.

Sources

  1. Demo features: "Live in this demo" list on the booth and banquette configurator library page, read 14 November 2026: modelwright.de/en/library/booth-seating-configurator/
  2. Rules and default set-up: demo source code (data.js, app.js) and schema notes; test results: QA log of 14 November 2026, independent round, emulated devices.

Read next