Industries & use cases

Brise-soleil and external louvre configurator for manufacturers: features, benefits, implementation

What a 3D configurator does for makers of brise-soleil, external louvres and louvre screens: profiles, spacing, drive, and the shadow on the glass.

Short answer: for a maker of brise-soleil, external louvres, rotating sun-shading blades and louvre screens, a configurator is worth building when it shows what a drawing struggles to: how the blades look on this particular facade, and how their shadow moves across the glass through the day. It sets blade direction, profile, depth, spacing, fixing, drive and finish, blocks combinations that cannot work, and produces an enquiry that lets the architect, the facade contractor and the manufacturer talk about the same product.

This guide is for managing directors, sales teams and technical marketing at manufacturers of brise-soleil, external louvres, rotating louvre systems, louvre screens and aluminium facade cladding. The people you deal with are architects and facade consultants, facade contractors who install the system, and the owners and property managers of offices, schools and public buildings.

Brise-soleil & louvre configurator – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

Who buys louvres, and when is the decision made?

Not an end customer picking from a catalogue. The system is chosen early in the design of a building, often long before installation, and later tendered and quoted per project. A maker who supplies a convincing image and a clean description at design stage stands a better chance of being written into the specification.

What makes louvres hard to explain?

  • The effect depends on time. Whether a blade shades the window depends on facade orientation, month and time of day. A photograph shows one moment.
  • Small dimensions, large consequences. Profile, depth and spacing decide the view through, the shading, and whether rotating blades can turn at all without touching.
  • Many system variants. Horizontal or vertical, on brackets or in frames, per window bay or continuous, fixed or motorised: each combination has its own rules.
  • Two purposes. The same blades shade windows or, as a louvre screen, hide plant and equipment, where the view matters more than the shade.

Which capabilities matter?

CapabilityWhyIn our example configurator
Application: facade or louvre screenShow both product linesYes: a two-storey facade with an interior, or a screen in front of a plant area
Direction, fixing, layoutSettle the system variantYes: horizontal or vertical, brackets or frames, per bay or continuous
Bays, window height, gap to the facadeBuilding dimensionsYes, with dimensions on the model
Profile, depth, spacingChoose the productYes: four profiles, live blade count and total length
Fixed or motorised rotationDrive and controlYes; impossible combinations blocked with a reason and a suggestion
Sun path and shadow on the glassShow the effect over the dayYes, with the share shaded as an example calculation
FinishesDesignYes: RAL-like colours, anodised tones, wood-look
EnquiryPrepare a quote or tenderReview, enquiry text and a PDF with outside and profile views

What does the manufacturer gain?

We do not promise figures. The gains are in the coordination between design team and manufacturer:

  • An image for the design stage. Architects see grid, projection and finish on the building instead of inferring the effect from datasheets.
  • Valid variants from the start. A profile that cannot be motorised is never requested as motorised, and the reason is shown next to it.
  • Shade as a talking point. The day's course on the glass makes visible what is otherwise discussed in the abstract.
  • Complete enquiries. Every enquiry states profile, depth, spacing, blade count, drive, finish and the results of the checks.

Try the example

Our brise-soleil and louvre configurator is an example configurator with a fictional product and example values, built by Modelwright with its own geometry. Profiles, spans, rules and shading figures are simplified sample values and example calculations: not a quote, and no statement on statics, wind load, energy or standards.

According to its "Live in this demo" list, it shows a facade or a louvre screen, with horizontal or vertical blades on outrigger brackets with blade carriers or in frames, per window bay or as a continuous run. You set the number and width of bays, the window height and the gap to the facade. You choose an aerofoil, elliptical, rectangular box or Z-profile in several depths, the blade spacing with blade count and total length, and a fixed tilt or motorised blades that track the sun, open or close. A sun-path slider moves the sun by time, month, facade orientation and an example latitude, casting shadows on the facade, the glass and into the room. There is a "window shaded" readout in percent, a day chart, outside, front, profile close-up and inside views, and a review with enquiry text and PDF.

In an independent QA round, not run by the builder, the full journey ran without errors on five emulated screen sizes from phone to desktop; no real devices were tested.

Example configurator · fictional product

Brise-soleil & louvre configurator

Plan facade louvres: choose horizontal or vertical blades, profile, depth, spacing, fixed or motorised rotating blades, mounting and finish – then move the sun with the sun-path slider and see the shadow travel across the glass and the share of the window shaded (example calculation).

Facades, balconies & solar shading · Dimensions and sizes · Colours · Materials and finishes

The rules for rotation, spacing and shading are explained in louvre configurator: sun path, shading and blade rules. Where shade on the ground and headroom matter, for school canopies and shade sails, see canopy and shade structure configurators.

Where responsibility stays

The configurator shows geometry and an example calculation of direct sun. Structural design, fixing to the building, wind loads and any statement on energy or indoor climate remain with the manufacturer, the structural engineer and the building services designers. The demo writes into every enquiry that it makes no statement on statics, wind load, energy or standards.

How would it be built for your systems?

For your range we use the outlines of your real profiles, your available depths, your span tables, your bracket and frame details, the rotation ranges of your actuators and your colour card. Profile drawings and size tables are usually enough; CAD is used when it suits the web. How the enquiry reaches sales, the facade contractor or the design team is covered in outdoor structure configurators: enquiries and dealers. For what drives the price, see what a 3D configurator costs; for hiring us, custom 3D configurator development.

Frequently asked questions

Can architects use it at design stage?

Yes, that is its purpose: check grid, profile and finish on the building and prepare an enquiry for the manufacturer. It does not replace detailed design.

Can our own building be shown?

The demo shows a generic two-storey facade with adjustable bays and window heights. Loading a specific building model or facade grid is a project requirement.

Does it give energy or cooling-load figures?

No. The "window shaded" share is an example calculation of direct sun. Energy and indoor-climate statements belong to the specialist designers.

Sources

  1. Modelwright library: brise-soleil and louvre configurator, "Live in this demo" list, read 14 November 2026: modelwright.de/en/library/brise-soleil-configurator/

Read next