Cleanroom tent configurator rules: airlock, filter units and hall fit
The rules a cleanroom tent configurator needs: system, size, airlock, a desired class as a sample value with filter units, and a hall fit check.
Short answer: a configurator for cleanroom tents and modules needs rules for four questions. System: tent or module, in which sizes? Access: with or without an airlock? Equipment: how many filter units for which desired cleanliness class? Placement: does it fit under the hall ceiling and on the free floor area? Our example configurator shows these questions with sample values. This guide explains how a manufacturer would write the rules down.
Which inputs does a cleanroom tent have?
| Input | In the demo | Proposed dependency for your range |
|---|---|---|
| System | Cleanroom tent or cleanroom module | Sets grid sizes, heights and possible options |
| Size | Selectable | Only sizes on your grid |
| Airlock | Optional | Changes footprint, access side and floor area needed |
| Inner height | Selectable | Plus the height of the filter units gives the overall height |
| Cleanliness class | Sample value, not guaranteed, with a filter unit count | Your mapping of requirement, area and filter units |
| Hall floor, colour, lighting | Selectable | Presentation in the existing building; options |
| Buy or rent | Selectable, price on request | Separate enquiry routes or price rules |
The "proposed dependency" column describes how we would build the rules for a manufacturer; it does not describe the demo's logic. All demo values are sample values of a fictional product.
How should desired class and filter units be linked?
In the demo, the configurator shows a number of filter units for the chosen class, explicitly as a sample value and not guaranteed. For a manufacturer, this link is the sensitive part: it is your expertise, and it depends on more than floor area.
We therefore suggest not inventing a formula in the configurator but taking a table from your sales team: for each system, size and desired class, the equipment you offer as a starting point. The configurator then shows that starting point, labels it as a proposal for the quote, and writes the desired class into the enquiry as the buyer's requirement. Whether the installation reaches that class in operation, and how it is qualified, is for the manufacturer and the operator; a configurator can neither check nor promise it.
Where your table has no answer, for example for very large areas, the configurator should say so openly and still allow the enquiry, with a note such as "equipment to be agreed".
How should the airlock be handled?
The airlock is optional in the demo. For a manufacturer's range we would propose three rules:
- The airlock adds to the footprint, and the hall check uses the total area, not just the work area.
- The airlock's access side can be chosen and appears on the plan in the enquiry, because it decides where free space must remain in the hall.
- Some requirements may make an airlock advisable. Whether and when is your decision; the configurator then shows a note rather than forcing it.
How do you check placement in the hall?
The demo checks against free room height and floor area. For height, what counts is not only the inner height but everything above it, such as filter units, frame and the clearance you need for installation and service. For area, it is the work area, the airlock and access. We recommend that the result names the constraint, for example "overall height exceeds free room height by X mm", and offers a way out, such as a lower inner height or another system. Whether the hall is genuinely suitable, for example because of ventilation, floor or services, is something you settle on site.
How should buying and renting be split?
The demo offers a choice of buying or renting, with the price on request. For a manufacturer's range we suggest treating the choice as a switch. Rental shows only systems and sizes available in the rental fleet and adds fields for start date, rental period and delivery location, plus a note on installation and removal if you offer it. Purchase shows the full range, with fields for the desired delivery date and possible later extension. If the buyer has not decided, the enquiry carries a short version of both. Whatever the route, the enquiry should state it clearly so it reaches the right desk in your sales team.
What data would you supply?
Your systems with grid sizes and heights, the build-up height of the filter units, the requirement-to-equipment table, airlock variants, clearance rules for placement, options and colours, and for rental the terms you want to ask about in the enquiry, such as rental period and delivery date.
What comes out at the end?
The demo produces a summary, enquiry text to copy and a two-page PDF. For a manufacturer project, we suggest the enquiry carries system, size, airlock, inner height, the desired class as a requirement, the proposed equipment, the hall data with the check result, and buy or rent.
Example configurator · fictional product
Cleanroom tent configurator
Plan a cleanroom tent or module: size, airlock, inner height, cleanliness class as a sample value with the number of filter units – with a hall fit check and a PDF enquiry.
Try it in the cleanroom tent configurator. Who such a configurator is for is covered in cleanroom tent configurator software, and the technical build in implementing configurators for stores, booths and enclosures. For a project, see custom 3D configurator development.
Frequently asked questions
Formula or table for the filter units?
We recommend a table from your sales team. It is traceable and can be maintained without anyone touching code.
Should an enquiry be possible when the hall check fails?
We recommend it. The enquiry then names the constraint, and your sales team can offer a solution.
Can it ask for the rental period?
In a project, yes, as a field in the enquiry. The demo offers a choice of buying or renting, with the price on request.
Sources
- Modelwright library, cleanroom tent configurator, "Live in this demo" list, read 14 November 2026: modelwright.de/en/library/cleanroom-tent-configurator/


