Technology

Implementing configurators for stores, booths and enclosures: data, geometry, checks

How 3D configurators for chemical stores, enclosures, booths, cold rooms and in-plant offices are built: grids as data, plan and 3D, checks, phones.

Short answer: stores, booths, enclosures, cold rooms and in-plant offices are systems of grids, modules and fields. A 3D configurator for them is best built from data: grid, modules, field types, options and rules sit in tables, and geometry, plan, checks and enquiry all read the same tables. Model, check and PDF then always agree, and you can maintain a range without rebuilding the visuals. This guide covers the decisions this group raises.

It is written for product managers, technical marketing and digital teams at manufacturers who are scoping a configurator, and for agencies working with them.

Acoustic machine enclosure configurator – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

Why data rather than finished 3D models?

A four-module chemical store, a 10 × 8 field in-plant office or an acoustic enclosure around one particular machine cannot be stored in advance as a single 3D model; there are too many combinations. Geometry is therefore generated from building blocks: a module, a panel, a wall field, a door, a shelf. Which blocks appear, how often and where, follows from the inputs and the tables.

In our own demos that split is literal. In the chemical store configurator, the acoustic machine enclosure configurator and the in-plant office configurator, everything a manufacturer would replace lives in one data file: module widths, grids, wall heights, containers, field types, door sizes, colours and the limits of the example rules. The geometry reads only from those tables. For a manufacturer project that means your range is mostly a data question, and new parts such as a louvre panel or a roller door are a new building block, not a new configurator.

Where does the geometry come from: CAD or grid?

For this group, dimension tables, drawings and photos are almost always enough. Panels, profiles, doors and shelving are rebuilt to your sizes, proportions and colours. We use CAD for parts whose shape itself sells, such as a cooling unit, a vent hood or a distinctive handle, when the data suits the web; how CAD is prepared for the browser is covered in CAD to web 3D configurator.

A special case is everything that is not your product but shows scale: the machine inside the enclosure, the vehicle in the spray booth, the forklift at the store, the hall around the office. In our own demos, such as the machines in the acoustic enclosure, these are stylised bodies so the eye stays on the product. In a project, buyers could for example enter their own machine size and the stylised body adapts.

Plan and 3D: two views, one state

Buyers in this group plan in two modes at once: on the plan for sizes and position, in 3D for the picture. Good configurators let both views edit the same thing. Examples from the demos:

  • In the in-plant office and the acoustic enclosure, a wall field or panel can be tapped in 3D or on the plan and changed.
  • In the walk-in cooler configurator, doors and glass openings are dragged along a wall in plan or 3D.
  • In the wire partition planner, the outline is drawn or dragged on a grid and doors are dragged along the walls.

Technically there is a single state, and both views redraw from it; a change on the plan must never look different in 3D. Phones add a limit: a plan field of a ten-field-wide in-plant office is well under 44 px wide on a 360 px screen. The demo therefore adds arrow buttons to move from field to field; in testing, no control was under 44 px.

Checks from the same data

Checks in this group are spatial: clearance to the hall ceiling, service zones around a machine, sump volume from footprint and height, the aisle between shelves, a booth inside a bay. They should calculate from the same numbers as the geometry, not from a second table; otherwise the model shows an enclosure that fits and the check reports an error.

Where a check becomes visible matters just as much. In the acoustic enclosure, service zones lie on the floor in green, amber or red. In the chemical store, a cutaway shows liquid rising in the sump and overflowing in red when it is short. In the in-plant office, the hall ceiling appears as a line above the office. Visuals like these explain a result better than a sentence in the summary.

Every check in the demos is an example rule with sample values. In a project we implement your rules; structure, fire safety, acoustics, ventilation and refrigeration are for you and your engineers.

Animation with a purpose

Animation is not decoration here when it shows a process that would otherwise need explaining. The forklift in the chemical store shows loading for front-access and walk-in stores. The exploded view of the acoustic enclosure shows posts, rails, panels and roof in assembly order. In the spray booth planner, an animated air path makes the booth types understandable. Doors open in several demos.

Technically, once an animation ends the picture stands still and the browser draws nothing until something changes. In the independent reviews of our own demos, idle state showed zero draw calls in three seconds, which spares battery and fans.

Phones, usability, units and languages

  • Phones: the three own demos were checked on seven emulated screen sizes from 360 px to 1,440 px, with no errors, no horizontal scrolling and no controls under 44 × 44 pixels, the target size named by the stricter success criterion 2.5.5 of WCAG 2.2 [1]. Real devices were not tested.
  • Usability: controls need meaningful labels for screen readers, in the page language. In the in-plant office, the independent review found English labels in the German version, which were corrected before publication.
  • Units: several demos work in feet-inches or millimetres, such as the spray booth, walk-in cooler and wire partition; the in-plant office offers a 1.20 m or 4 ft grid. We recommend keeping data in one unit and converting only the display.
  • Languages: the chemical store, acoustic enclosure and in-plant office run in German and English, the cleanroom tent configurator has its own English version, and the cold room configurator is German only. More languages are a matter of text tables in a project.

Privacy and maintenance

On our library pages the 3D demo starts at once on desktop and only after a tap on phones and tablets; until then the page shows a preview image. For analytics, our own demos recorded only control names in tests, no typed contact details. Which events you analyse is agreed in the project. Maintenance depends on keeping data and visuals apart: when a grid, a door width or a colour changes, a table changes. New products, such as another booth series, usually need new data and occasionally a new building block.

What the demos deliberately simplify

An honest assessment includes the limits of our own demos as recorded in their review notes. The forklift in the chemical store follows a simplified path without steering, storage places are a fixed grid, and there is deliberately no logic for mixed storage of substances. The machines in the acoustic enclosure are stylised bodies with example sizes. The in-plant office has partitions on the ground floor only, and HVAC and electrics are schematic boxes. In a project we agree with you which simplifications are enough for your sales process and where more precision is needed.

Examples

Example configurator · fictional product

Acoustic machine enclosure configurator

Plan an acoustic enclosure around a machine: pick the machine and clearance, tap panels to turn them into doors, windows, vents or pass-throughs, set the roof and crane access – with an exploded view, assembly sequence, service check and a PDF enquiry.

Industrial cells & machines · Dimensions and sizes · Colours · Materials and finishes

Example configurator · fictional product

In-plant modular office configurator

Plan an in-plant office on a panel grid: choose the size and storeys, tap wall fields to turn them into windows or doors, set rooms, HVAC, electrical and colours – with a floor plan, a hall-clearance check and a PDF enquiry.

Prefab process cells · Dimensions and sizes · Colours · Materials and finishes

Who receives the enquiry at the end is covered in configurators for stores, booths and enclosures: from enquiry to quote, and the project in custom 3D configurator development.

Frequently asked questions

Do we need CAD data?

Usually not. For grid and panel systems, dimension tables and drawings are enough. CAD pays off for individual parts whose shape matters.

Can we change grids and colours ourselves?

The data sits apart from the visuals. A self-service editor is not part of our standard offer; we assess case by case whether it is worthwhile.

What do devices without 3D support see?

On our library pages a note appears with a link that opens the demo directly. For your project we recommend that the enquiry stays possible anyway, for example through a simple form.

Sources

  1. W3C: Web Content Accessibility Guidelines (WCAG) 2.2, success criteria 2.5.5 and 2.5.8, read 14 November 2026: https://www.w3.org/TR/WCAG22/
  2. Features of the example configurators: "Live in this demo" lists on the linked library pages, read 14 November 2026.

Read next