Technology

Flagpole configurator rules: height, outrigger arm, fixing and rows of poles

The rules a flagpole configurator needs: height and diameter per type, flag and outrigger arm, matching ground fixings, rows of poles and building height.

Short answer: a flagpole configurator needs five rules: a table of heights and diameters per pole type, a rule for flag and outrigger arm, a mapping of fixings to diameters, a rule for a row of poles in front of a building, and clear limits on what the configurator does not judge. According to its library page, our example configurator shows pole types with height and diameter, an outrigger arm, fixings and a row of poles with a building height check, all with sample values; this guide proposes how you would write the rules behind them for your range.

Flagpole configurator – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

Which parameters does a flagpole have?

The "Live in this demo" list of the flagpole configurator names the inputs [1]. The right-hand column is our proposal for how they should depend on each other in a project.

ParameterIn the demoProposed dependency
Pole typeA, B, C conical, LEDsets heights, diameters, halyard, outrigger arm and lighting
Height and diameterper typeonly pairs from your table
Outrigger armoption with flag widthonly on types that carry one; length follows flag width
Flagsize, motif placeholderssize to suit the pole height
Fixingground sleeves, tilt mounts, typical-mount badgeonly fixings for the chosen diameter
Colourspole and LED coloursLED colours only for the LED type
Quantity1–5 poles in a row with building height checkspacing from flag width, height against the building

Why height and diameter come from a table

A pole is not continuous. Each type is made in certain heights and diameters, and not every height exists in every diameter. We propose keeping these pairs as a table per type, with every value your catalogue lists. The configurator then offers only heights that exist for the chosen type and only the diameters that belong to that height. If the buyer switches type, the nearest available height should be selected and a note should say what changed.

An important limit: which height and diameter suit a site is not in this table. Design is your responsibility as the manufacturer. The configurator can show a note you write, for instance that suitability for the site is clarified in the quote.

How do flag and outrigger arm relate?

We propose two rules. First, a rule of thumb for the ratio of flag size to pole height, taken from your catalogue. The configurator uses it to suggest a flag size and warns when the chosen one differs a lot. Second, a link between arm and flag: with an outrigger arm the flag hangs vertically, and the arm length has to suit the flag width. The demo shows the arm as an option with flag width [1]; which lengths exist and in which steps is up to you.

The flag motif is a placeholder in the demo. In a project, buyers can upload their logo. That needs a rule that checks file type and size, and a decision on whether the file travels with the enquiry.

Which fixing suits which pole?

Ground sleeves and tilting bases are made for certain foot diameters. The rule is a mapping: each fixing has a list of diameters it is intended for. The configurator shows only fixings that fit and marks the one that is typical for this pole. The demo shows such a typical-mount badge [1]. What "typical" means is your call, for example a tilt mount for poles that are regularly lowered for maintenance.

The "tilt" animation makes the difference visible: with a tilt mount the pole is lowered without lifting it out. The "foot" view shows the fixing close up.

How do you check a row of poles in front of a building?

The demo puts 1–5 poles in a row and checks the building height [1]. For a project we propose two rules:

  • Spacing. The gap between poles follows from the flag width plus an allowance you set, so flags do not touch. The total length of the row appears in the summary.
  • Height against the building. Poles almost as tall as the eaves can look undecided. A rule can require a pole to stay a minimum distance below the building height or to clearly exceed it. You set the values; the configurator shows the result as a note, not a ban.

The buyer only enters the building height. That is enough for a first impression; your team settles the exact position on site.

What the animations do here

The demo shows hoist, wind, tilt and night [1]. Each one explains a property that would otherwise need words: how the flag is raised, how it flies in the wind, how the tilt mount works and how an LED pole looks after dark. The animation shows the principle, not the exact mechanics of your product, and the configurator should say so.

What data do you provide?

For a configurator with your poles we need, per type, the height and diameter table, halyard system and arm lengths, the mapping of fixings to diameters, your colours and LED options, your flag formats and your rules for flag size, spacing and building height.

What comes out at the end?

According to the list, the demo lets you copy the enquiry text and download a 2-page PDF [1]. For a project we propose that the enquiry holds type, height, diameter, arm, flag size, fixing, colour, quantity and the building check result, plus a view of the row. How checks, animations and the PDF are built technically is covered in building configurators for trade fair and event structures.

Example configurator · fictional product

Flagpole configurator

Put together flagpoles: four mast types, height and diameter, boom, flag size, ground sleeves and tilt mounts, colours, 1–5 masts in a row – with animations and a PDF enquiry.

Other niches · Dimensions and sizes · Colours · Options, modules and accessories

Who such a configurator is for is covered in flagpole configurator for manufacturers and dealers. For the project process, see 3D configurator development.

Send us your pole tables – we show which rules follow from them.

Frequently asked questions

Are the demo's heights and fixings generally valid?

No. They are sample values of a fictional product. In a project your catalogue values apply.

Can a row have more than five poles?

The demo allows up to five. For your project we set the limit from your typical installations.

Which language is the demo in?

The controls are in German. In your project we set up the languages you need.

Sources

  1. Modelwright library, flagpole configurator, "Live in this demo" list and sample-values note, read 14 November 2026: modelwright.de/en/library/flagpole-configurator/

Read next