3D gearbox viewer: building item numbers, cut-away and technical data properly
How a 3D viewer for a planetary gearbox is structured: part structure, item numbers, section plane, drive speed, technical data and the step to selection.
Short answer: a 3D viewer for a planetary gearbox rests on a clean part structure: every part that carries an item number, looks different in the section or moves must be a separate part in the model. Four functions sit on top: item numbers, a cut-away view, a drive with adjustable speed and a block of technical data. Our example with a fictional planetary gearhead shows all four.
Why does everything start with the part structure?
Gearbox CAD data is organised for manufacturing: assemblies, standard parts, variants. A web viewer needs a different structure, organised by what the user should see. Before we build a model, we set up a table:
| Column | Content | Example |
|---|---|---|
| Part in the model | Unique name | Planet gear 1, ring gear, output flange |
| Item number | Number shown on the model | From your drawing or spare parts list |
| Motion | Turns with which shaft, at what ratio | Planets spin and orbit with the carrier |
| Section | Cut or left whole | Housing cut, gears whole |
| Explosion | Direction and order | Flange first, then the planet stage |
The examples in the right-hand column are proposals for a project, not a description of the demo's internals. The table is also the basis for sign-off: your design team sees which parts become visible and can exclude details.
How do item numbers work in a 3D model?
In the example, item numbers can be shown on the parts [1]. Technically an item number is a label attached to a point on the part that follows every rotation and every view. Three decisions make the difference:
- Which parts get a number. Numbering every part clutters the view. Number the parts service staff and buyers ask about.
- Where the numbers come from. For a maker they should match the spare parts list or drawing; otherwise two numbering systems appear.
- What a tap does. In the demo, hovering over or tapping a part shows its designation with example details. An article number or a link to a spare-part request would be project work.
Item numbers and the section depend on each other: a number on a part hidden by the section helps nobody. In a project we decide per view which numbers are visible and check it with your technical writers on images from the model before the view goes live.
How is a cut-away view defined?
The demo has a cut-away view [1]. For a gearbox the position of the section plane is the main decision: it must show sun gear, planet gears and ring gear at the same time. Then comes which parts are cut. Cutting housing and ring gear shows the inside; leaving the gears whole keeps the teeth readable. The cut-away works best with the drive running, so you see the planets roll inside the ring gear.
How is the drive controlled?
In the example the user runs the drive and sets the input speed [1]. For an explainer the rule is: motion must follow from the gear ratio, not be animated freely, or the model contradicts the data sheet. In a planetary gearbox the motion depends on which member is held and which drives; that comes from your design. At high speeds a slowed-down display that keeps the ratio makes sense.
Where does the technical data belong?
The demo shows technical data as sample values; the library page says explicitly that they are not a design calculation and not a data sheet [1]. In a project there are two routes:
- Fixed figures per model, taken from your data sheet. Easy to maintain while there are few variants.
- Figures from a data table per variant, when the user chooses frame size or ratio. That is the step towards a configurator.
Either way, the viewer shows values; it does not calculate a design. Whether a gearbox suits an application is still judged by your engineers.
What would a selection configurator add?
Not in the demo, and described here as a proposal: choice of frame size, ratio from your stage list, output type (shaft or flange) and motor adapter; rules for which combinations exist; a type code and an enquiry. For planetary gearboxes with many variants per frame size, it pays to assemble geometry from a few blocks rather than load each variant as its own model.
Who maintains the data?
A gearbox viewer has three kinds of content that change at different rates: the geometry (rarely, with new series), the item numbers and designations (when the spare parts list changes) and the technical data (when the catalogue changes). We recommend keeping numbers, designations and figures in a table separate from the model, checked by your technical writers. A change to the spare parts list then stays a table change, not a new model.
What about loading time?
Gear teeth have many faces. For the web the geometry is simplified until the teeth look clean but the model loads quickly; see CAD to web 3D configurator. The example planetary gearhead runs in an older control shell; we recommend viewing it on a desktop.
Try it
Example configurator · fictional product
Planetary gearhead
A planetary gearhead for sales and training: running drive with adjustable input speed, cut-away and exploded views, item numbers and technical data as sample values.
The planetary gearhead is an example configurator with a fictional product and example values. What makers use such a model for is covered in planetary gearbox in 3D; the project is described on 3D configurator development.
Frequently asked questions
Do we need CAD data?
For gearboxes it is usually the best starting point. We check before the start whether it suits the web.
Can we maintain the item numbers ourselves?
A self-maintenance editor is not standard with us. Small changes are part of hosting and care; larger ones are a separate job.
Does the demo work on a phone?
It loads in the browser, but the control bar of this older demo covers part of the model on small screens. We recommend a desktop.
Sources
- Modelwright library: planetary gearhead, "Live in this demo" list and sample-value note, read 14 November 2026: modelwright.de/en/library/planetary-gearhead-3d/


