Technology

Guard booth configurator logic: standard plans, size grid and shipping checks

How a guard and ticket booth configurator links style, size grid, door, windows, standard plans and shipping notes as rules, and what data you supply.

Short answer: a guard booth configurator needs three kinds of rule. Form rules say which roof, door and glazing go with which style. Grid rules set the steps and limits for length and width. Advisory rules say whether the size matches a standard plan and what follows for shipping and foundations. The first two narrow the choice; the third only informs. Our example configurator contains the parameters, the grid and the notes with example values; the form rules are our proposal for a project.

Guard booth configurator – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

What are the parameters of a guard booth?

ParameterIn the exampleKind of rule
Stylestraight, glass corners, hip roofform rule: can set presets for roof, finish and glazing
Length, width1 ft steps by drag handle, fields or steppersgrid rule
Roofroof typesform rule
Doordoor type and positionform rule; position can depend on size
Equipmentcashier window, A/C, lightschoice, partly with a space requirement
Finisheswall finish, sample paint and roof colours, glazingchoice
Standard plannote when the size matches a standard planadvisory rule
Foundation, shippingchecks shown as notesadvisory rule

The middle column reproduces the "Live in this demo" list [1]. The right-hand column sorts the parameters into the three kinds of rule; that is our classification for planning a project.

Form rules: what goes with which style?

A style is more than a picture. A booth with glass corners needs a different roof edge from one with a hip roof; a particular finish may only exist for one style. These dependencies are kept as a list: for each style, which roofs, finishes and window divisions are allowed and which are preset. When the buyer changes style, the configurator should reset values that no longer fit to an allowed default, and say so.

For your sales team this matters: a change must never silently drop input. If a value is reset, the buyer has to see it, or the enquiry will describe a different booth from the one in their head.

Grid rules: how are length and width controlled?

In the example, length and width move in 1 ft steps, three ways: a drag handle on the model, a number field, or plus and minus buttons [1]. Three ways to set one size is not a luxury. On a desktop, dragging is quick; on a phone, steppers are more precise; and someone with a dimension from a site plan types it.

For your range you set the grid, for example in 250 mm or 6 in steps, plus minimum and maximum sizes per style. A value outside is moved to the nearest allowed value, with a message.

Advisory rule: does the size match a standard plan?

The example reports whether the chosen size matches a standard plan [1]. It is a simple but effective rule: a list of sizes with finished drawings and a comparison with the choice. To the buyer the message can read "standard" or "custom size"; to your sales team it means "can be priced now" or "needs engineering".

Such a rule blocks nothing. It only resets expectations, and it appears in the enquiry. Whoever picks a custom size knows in advance that it needs its own design work.

Advisory rules: shipping and foundations

For the chosen size the demo shows foundation and shipping checks. The library page labels them explicitly as simplified sample values, "not a structural design and not a quote" [1].

In a project, such notes translate your own information, for example "oversize load above this width", "crane required" or "base to manufacturer's drawing". The configurator calculates none of this; it passes on what you have defined for a size class. How the foundation is actually built is decided by you as the manufacturer with your structural engineer and whoever manages the site.

How is workplace equipment handled?

Cashier window, A/C and lights are simple choices in the example [1]. In a real range they almost always have a place: a cashier window sits on the lane side, an A/C unit needs a wall without windows or a spot on the roof, and lighting depends on the roof form. These dependencies are written as placement rules: which wall, which height, what minimum distance from door and windows.

There is an easily missed benefit for sales. When the configurator fixes the position, it is in the enquiry too, and nobody has to ask "which side should the cashier window be on?". If a placement rule is missing, the configurator should at least ask for the position.

Units: ft/in and mm

The demo switches between ft/in and mm [1]. For makers who also ship to markets using feet and inches, this is more than display: the grid is defined in one unit and the other is converted. The enquiry should therefore always state the unit you build in, so that no rounding creeps in between configuration and production.

What data do you supply?

  • styles with their allowed roofs, finishes, doors and glazing;
  • size grid and limits per style, in your production unit;
  • the list of sizes with a standard plan;
  • size classes with your shipping and foundation notes in plain words;
  • equipment with its space needs, such as where an A/C unit can go.

What comes out at the end

The buyer copies the enquiry text or downloads a PDF [1]. The demo does not send the enquiry; in a project the enquiry goes to your sales team by email or webhook.

Example configurator · fictional product

Guard booth configurator

Plan a guard or ticket booth: three styles, length and width, roof, door, cashier window and equipment, colours and glazing – with foundation and shipping checks and a PDF enquiry.

Pods & booths · Dimensions and sizes · Colours · Materials and finishes

Try it in the guard booth configurator. Who benefits is covered in guard booth configurator for manufacturers, and how models and rules are built and maintained in building a configurator for halls and modular buildings. For the project process, see 3D configurator development.

Send us your standard plans and size grid.

Frequently asked questions

Can the configurator block custom sizes?

Yes, if you want. More often a "custom size" note is the better choice, because the enquiry still arrives.

Are the shipping notes binding?

No. In the demo they are sample values; in a project they reflect your information and do not replace transport planning.

How many styles make sense?

As many as you actively sell. The demo shows three.

Sources

  1. Modelwright library, guard booth configurator, "Live in this demo" list and note on foundation and shipping checks, read 14 November 2026: modelwright.de/en/library/guard-booth-configurator/

Read next