Technology

Office chair configurator logic: options, dependencies, mechanism and exploded view

How an office chair configurator models options and their dependencies, animates the mechanism and explains the build in a labelled exploded view.

Short answer: an office chair configurator has three layers. Options: back, cover, frame, armrests, headrest. Movement: seat height, armrest height and recline as linked animation. Construction: an exploded view where every part has its place and its name. The options are few but interlocked, and the movement needs a model whose parts are genuinely separate and hinged at the right points.

Office chair configurator – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

Which options are there, and how do they interact?

Our office chair configurator is an example configurator with a fictional chair and example values, built by Modelwright. Its options:

  • Back: mesh or upholstered. The backrest is swapped, and its label in the exploded view follows.
  • Cover: grey melange, navy wool, green felt, cream bouclé, cognac leather. It colours the seat cushion and an upholstered back; with a mesh back, the mesh takes a matching tone. Each cover also has its own stitching colour.
  • Frame: black, white or polished aluminium. It colours the base, back carrier, armrest brackets and headrest stem, together with coordinated plastics and castor bodies. With polished aluminium the shell and castors stay dark; with white they turn light.
  • Armrests and headrest: on or off. Switched on, the parts slide into place; switched off, they are hidden.

In the demo the dependencies live in data rather than in prohibitions: a cover sets not only the cushion colour but the mesh tone and stitching; a frame finish colours several parts and their matching plastics. That kind of mapping is typical for office seating and belongs in a table your product team can maintain. Real exclusions, such as "headrest only with the high back", would be added for your range; the demo has none.

Covers need more than a colour name: a colour value, a texture (melange, wool, felt and bouclé read differently, leather has a sheen) and the right thread colour. Your fabric book and, ideally, scans of the materials are the best input. Screen colour remains an approximation; the buyer still makes the final choice on the swatch.

How is the mechanism shown?

Three sliders drive the adjustment: seat height, armrest height and recline (synchro). In the demo they run between lowest and highest position without millimetre values, because the chair is fictional; for your chair we would use the real travel.

  • Seat height: the chair rises or lowers on the gas lift, and the lever under the seat flicks as it moves, so you can see where the adjustment is made.
  • Recline (synchro): the back tilts and the seat follows at a fixed, smaller ratio. That coupling is exactly what a photograph cannot show.
  • Armrest height: the armrests travel up and down in their guides.

"Play mechanism" runs the adjustments as one continuous sequence. All movements are spring-animated and settle cleanly. If the operating system asks for reduced motion, the demo jumps straight to the reclined, raised position instead of animating. Once movement stops, the page stops drawing until something changes again, which spares battery and processor.

How is the exploded view built?

In the exploded view the parts move apart slightly staggered, so the order of assembly can be followed. Each label appears once its part has arrived: twin-wheel castor, five-star base, telescopic cover, gas spring, synchro mechanism, seat (upholstered cushion with piping), 4D armrest, back carrier, backrest (mesh or upholstered), lumbar support (mesh back only) and headrest. In the English version the labels are the part names stored in the model; the German version uses its own, slightly longer wording. Parts that are switched off, such as a deselected headrest, stay out of the explosion and carry no label.

The names belong to the fictional demo's data. For your product we would use your part names and, if useful, your spare-part numbers.

Example configurator · fictional product

Office chair configurator

An office task chair: mesh or upholstered back, covers, base, armrests and headrest – with adjustable seat height, synchro mechanism and an exploded view.

Furniture in the buyer’s room · Dimensions and sizes · Colours · Materials and finishes

What must the 3D model support?

For movement and explosion to work, the model has to be built differently from one made for a still image:

  1. Separate parts with meaningful names, not one merged mesh. Everything that moves or carries a label is its own object.
  2. Pivots in the right place: back and seat tilt around the mechanism's axis, not around their own centre.
  3. Linked parts: parts that move together, such as back carrier, back and headrest when reclining, are assigned to one motion.
  4. An explosion direction and order per part, so pieces do not drive through each other.

Parts and pivots can often be taken from engineering data, but the model still has to be simplified for the web. That step is covered in furniture configurator implementation.

What is missing for sales?

The demo ends at the view: no price, no article number, no enquiry. For a project we would propose a summary of model, back, cover, frame, armrests, headrest and quantity, sent to your sales team by email or webhook, or a price per version if you sell direct. Why manufacturers build one and how it fits shop, dealer and contract sales is the subject of office chair configurator for manufacturers; how a project runs is under custom 3D configurator development.

Frequently asked questions

Can it show real adjustment dimensions?

Yes, if you supply the travel. The demo deliberately shows no millimetres because the chair is fictional.

Does the configurator make comfort claims?

No. It shows how a chair moves and what it is made of. Claims about your product remain yours as the manufacturer.

Can the exploded view be used for spare parts?

Yes. If each part carries an article number, the exploded view can be used to pick spare parts. That is not built into the demo.

Sources

  1. Demo features: "Live in this demo" list on the office chair configurator library page, read 14 November 2026: modelwright.de/en/library/office-chair-configurator/
  2. Options, movement and labels: demo source code (office-chair/runtime/chair.js: FABRICS, FRAMES, BACKS, LABEL_DE/LABEL_EN, controls and animation), read 14 November 2026.

Read next