Technology

Outdoor kitchen planner rules: modules, corners and wall fit

Rules for an outdoor kitchen planner: the grill as anchor, module widths, fillers, L-shaped corners, wall or island, finishes and wall fit.

Short answer: an outdoor kitchen planner needs four groups of rules: run (which modules at which widths may sit side by side), shape (straight or L, against a wall or as an island, and what happens at the corner), fit (how the run fills the available wall) and design (which fronts combine with which finishes). Together they produce a layout with module order, sizes and prices that your sales team can recalculate.

Outdoor kitchen planner – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

What are the parameters of an outdoor kitchen?

In the example configurator the inputs are:

ParameterIn the exampleDependency (proposed)
GrillThree sample built-in grills (S/M/L)Cut-out width; position in the run
ShapeStraight or L, wall or island backCorner solution; back panel for an island
Cabinet modulesAdd, remove, reorder; sample widthsWidths per module type; total against the wall
FrontsStyle A/B; stainless, ipe or paintedFinishes per door style
ColourColour paletteOnly with painted fronts
Handles, steel gradeA choicePrice per module
FuelA choiceGrill version
WorktopMaterialsAcross the whole run
Wall and patioSizes for the autofitBasis of the fit check

All values and prices are fictional example values. The first two columns follow the list on the library page; the dependency column is a proposal for how a manufacturer can write down its rules, not a description of the demo's logic.

How should the module run be handled?

An outdoor kitchen is a chain of modules. We propose building every chain from three kinds of element:

  • The grill module. It has a fixed cut-out width per grill size and is the only required element.
  • Cabinet modules with permitted widths. Each module type has a list of widths you build: a drawer cabinet perhaps in three widths, a refrigerated module in one. The planner offers only those.
  • Fillers. Narrow filler pieces take up remainders. They are a module type of their own with their own widths and appear in the enquiry like any other module.

Reordering then means changing the order of the chain, not its total. Whether certain modules may not sit next to each other, a refrigerated module right beside the grill for instance, is a manufacturer's rule that you set and stand behind; the planner implements it as a message or a block.

How does the planner fit the run to the wall?

The library page lists a fit-to-my-wall autofit with patio size. A traceable form of this rule, as we would propose it for your planner:

  1. The sum of all module widths is compared with the wall length.
  2. If the run is longer than the wall, the planner says so and states the overhang.
  3. If it is shorter, the planner proposes filling the remainder with fillers or a wider module.

A worked example with freely chosen figures, not demo values: on a 3.00 m wall, a 0.90 m grill module and three cabinets of 0.60 m each make 2.70 m. That leaves 0.30 m: either one cabinet is swapped for a 0.90 m one, or three 0.10 m fillers close the gap. Whether the planner applies the fix itself or only proposes it is a decision for your project; we recommend proposing it so that buyers see what changed.

What happens at the corner and with an island?

In an L-shape two runs meet. The corner needs its own rule: either a corner module or a filler, so that doors and drawers do not block each other. Each leg is checked against its own wall length. An island adds a visible back, which can have its own cladding and its own price. The demo shows straight and L-shaped runs against a wall or as an island; how your corner is solved is for you to specify.

Which fronts go with which finishes?

According to the library page there are door styles A/B and stainless, ipe or painted finishes with a colour palette. For a maker's planner we propose tying each finish to the door styles it is available in. If the buyer changes style, a matching finish stays selected or is replaced with a message. The colour palette appears only when painted is chosen. How timber or stainless fronts should be cared for outdoors belongs in your product information, not in a planner rule.

Why animate the hood and drawers?

The library page lists a hood and drawer animation. A configurator can use it to show which modules have drawers, doors or open shelves, a question that is hard to answer from photos. In a project the same approach can show pull-outs or refrigerated drawers if your range has them.

What data do you supply?

We need your module catalogue with types, widths, heights and depths, your grills with cut-out sizes, your corner and island rules, fronts, finishes and worktops with their combination rules, part numbers and, if wanted, prices. How drawings and CAD become the web model is covered in CAD to web 3D configurators.

What comes out at the end

The enquiry should list the module order from left to right with type and width, plus shape, grill, fuel, fronts, finish, colour, handles, steel grade, worktop and the wall length entered. In the demo the enquiry text can be copied and downloaded as a PDF. In a project it goes to your sales team or dealer by email or webhook.

Example configurator · fictional product

Outdoor kitchen planner

Plan an outdoor kitchen: grill, straight or L-shaped, add and reorder cabinet modules, fronts and countertop, auto-fitted to your wall – with sample prices and a PDF enquiry.

Outdoor kitchens · Dimensions and sizes · Colours · Materials and finishes

You can try this in the outdoor kitchen planner. Who such a planner suits is covered in outdoor kitchen configurator for manufacturers. For hiring us, see custom 3D configurator development.

Frequently asked questions

Can the planner produce a bill of materials with part numbers?

In a project, yes, if you supply your part numbers. The demo shows the layout with fictional sample prices.

Does it check gas, electrical or water connections?

No. It reflects your modules and combination rules. Connections and clearances are the responsibility of the manufacturer and the installer.

What about custom sizes?

The planner works with your standard widths. If a remainder does not work out, the enquiry can flag it as a custom size.

Sources

  1. Modelwright library: outdoor kitchen planner, "Live in this demo" list (read 14 November 2026): /en/library/outdoor-kitchen-configurator/

Read next