Technology

Reception desk workstation and reach checks: the rules inside a counter configurator

The rules a reception desk configurator runs: usable edge per shape, width per workstation, space to the back wall, reach across the desk and a suggestion.

Short answer: a reception desk configurator needs four checks on the staff side. Width per workstation: do the places fit along the usable edge? Space behind: is there room for a chair and a way past? Reach: can something be handed across the desk? And, for a U-shape, staff access past the return. Each is a short formula with limits. Our example configurator runs all four with example rules and colours the result green, amber or red in plan view.

Reception desk configurator – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

What goes into the calculation?

  • Shape: straight, L, U, curved or island; it decides the usable edge.
  • Module width 0.80, 1.00 or 1.20 m and 2 to 6 modules along the front; 1 to 3 modules per return on L and U.
  • Radius 2.5, 3.5 or 5.0 m for the curved desk.
  • Depth 0.70, 0.80 or 0.90 m.
  • Space to the back wall 0.60 to 3.00 m in 100 mm steps.
  • Raised top on or off, 1.05, 1.10 or 1.15 m high, with an overhang of 100 to 350 mm.
  • Workstations: 1 to 4.

How long is the usable edge?

Workstations line up along the staff edge, and how much of it is usable depends on the shape. In the example: the full front for a straight desk; the front less one desk depth for an L, because the inside corner is no place to sit; less two depths for a U; less 0.1 m for an island; and for a curved desk, the front scaled by the ratio of inner to outer radius, (R − depth) ÷ R.

The workstation count is capped at as many as fit on that edge at 0.60 m each, and never more than four. Ask for more and the demo resets the number with a short notice. Other impossible combinations are tidied up the same way: a small-radius curved desk gets fewer modules, and pedestals are limited to the free places.

Which limits does the example use?

CheckCalculationGreenAmberRed
Width per workstationusable edge ÷ workstationsfrom 1.20 mfrom 1.00 mbelow
Space behind the deskthe set distance to the back wallfrom 1.00 mfrom 0.80 mbelow
Reachdepth + raised-top overhang (no raised top: depth + 20 mm)up to 0.95 mup to 1.10 mabove
Staff access (U only)depth + space behind − return lengthfrom 0.80 m–below

Every limit is an example rule for a fictional product. Which dimensions apply to workplaces and visitors on a real project is for the designer and the client to settle; the demo explicitly makes no statement on that.

Two cases from the demo's QA, recalculated by hand. The default L-desk of four 1.20 m modules, 0.80 m deep, with three workstations: (4.80 − 0.80) ÷ 3 = 1.33 m each, green; reach 0.80 + 0.15 = 0.95 m, also green. A U-desk of four 1.00 m modules, 0.90 m deep, with three workstations: (4.00 − 1.80) ÷ 3 = 0.73 m, red.

What happens on amber or red?

If the width per workstation is not green, the demo suggests the largest smaller number of workstations that turns it green and applies it with one click. For the U-desk above that is one workstation, because two would still give only 1.10 m, which is amber. The space-check panel names the check that fails, for example "reach too long", so it is clear which setting to change: less overhang or a shallower desk for reach, more distance to the wall for the space behind.

A red check does not block the enquiry. It appears in the review and the PDF and tells your sales office what needs discussing.

Which other rules apply?

  • Lowered section: one module at 0.76 m with knee space, left, centre or right. Next to a corner it moves one module inwards; on a U-desk with two front modules it is dropped. The plan draws a 1.50 m free circle in front of it but does not check it. All example dimensions.
  • Pedestals: up to four, beside the seats, never under the lowered module.
  • Brackets: above 200 mm of overhang, steel brackets appear under the raised top.
  • Visitor zone: 1.50 m in front of the desk, drawn in plan view.
  • Back wall on L and U: the space behind can never be less than the return length minus the desk depth, or the return would stand in the wall; the demo raises it to that value.

Example configurator · fictional product

Reception desk configurator

Plan a reception desk: choose shape, modules, raised top and front, and see in the plan at once whether every workstation has enough space and reach.

Furniture in the buyer’s room · Dimensions and sizes · Colours · Materials and finishes

What goes into the enquiry?

The review lists up to 19 rows (19 with the defaults), from shape and modules through space to the back wall, width per workstation and reach to fronts and tops, plus the checks against example rules. The enquiry text copies every row verbatim with name, company or venue, email, phone, number of desks and a message. The PDF shows a 3D view and the zoned plan. In both QA rounds all 19 rows appeared verbatim in the enquiry text.

What does your data replace?

For your range, your module and corner tables, radii, height profiles, decors and your planning values for workstation width and clearances replace the example values. Because sizes, options and rules live in a data file and the geometry is built from them, the range can be maintained without rewriting the logic. Lighting, materials and load time are covered in furniture configurator implementation; the industry view in reception desk configurator for manufacturers; how a project runs in custom 3D configurator development. The demo is on the library page.

Frequently asked questions

Where do 1.20 m, 1.00 m and 0.95 m come from?

They are the demo's example rules. For your range we use your own planning values; what applies on site is for the design team to confirm.

How is the space to the back wall measured?

From the staff edge of the desk to the wall.

Why four workstations at most?

It is a limit of the demo. In a project it follows your modules and workstation kits.

Sources

  1. Demo features: "Live in this demo" list and product text on the reception desk configurator library page, read 14 November 2026: modelwright.de/en/library/reception-desk-configurator/
  2. Rules, ranges and check cases: demo source code (data.js: RULE, MODULES, DEPTHS, BACK, OVER; app.js: layout, facts, bestWs, checks, pedPositions) and schema notes; test cases: QA log of 14 November 2026 (builder and independent rounds, emulated devices).

Read next