What is this product type?
An example configurator for made-to-measure built-in wardrobes (fictional product). Enter the width, height and depth of the niche, with a sloped ceiling on the left or right if needed. The wardrobe divides itself into equal sections or into the number you choose; filler panels, plinth and ceiling filler take up the niche. Choose hinged or sliding doors or open compartments, a handle, lacquer, veneer or mirror, and per section a hanging rail, shelves, drawers or shoe pull-outs with LED light. The doors open in the model and reveal the fittings. The fit check shows whether a door hits the wall, how low the front gets under the slope and whether rails have enough height and depth, with one-click suggestions and an example parts list. All sizes, rules and parts are example values; the check does not replace measuring on site.
Example configurator by Modelwright for manufacturers of furniture in the buyer’s room. Product, sizes, options and prices are fictional sample values – not a product of any real manufacturer; no manufacturer ordered, reviewed or endorsed this demo.
What manufacturers use it for
- Made-to-measure built-in wardrobes
- Niche and alcove cabinets
- Wardrobes under sloped ceilings
- Sliding-door wardrobes
For your own product, Modelwright builds the configurator with your carcass sizes and board thicknesses, your fronts, veneers and colours, your hardware, handles and fittings, your rules for section widths, fillers, slopes and doors, your parts list, your enquiry route and, if you wish, your prices. The model is built from your dimensions and drawings, not from a stock model.
Whether and how this pays off for your product depends on your range and sales process; we do not promise figures.
Live in this demo
- Niche width, height and depth with plus/minus and typed input; sloped ceiling on the left or right with knee wall height and pitch
- Automatic division into equal sections (example rule 300–1,000 mm) or a chosen number with the resulting width shown
- Filler panels left and right, plinth none / 60 / 100 mm, ceiling filler for tall niches
- Hinged doors (one or two per section), sliding doors on two tracks or open compartments; sliding doors blocked with a slope or too little depth
- Grip groove, bar handle or knob, stainless look or black
- Six lacquer colours, oak, walnut and ash veneer with the grain running on across all doors, mirror; carcass inside white, light grey or oak decor
- Fittings per section: hanging rail with hat shelf, two rails, shelves, inner drawers or shoe pull-outs; pull-out rails when the niche is shallow
- Doors open one after another (sliding doors glide) and reveal the fittings with LED light; drawer and shoe pull-out slide out
- Live fit check: filler against door and handle at the wall (the door stops and is marked red), angled cut with the lowest front, rail height per section, inner depth; one-click suggestions
- LED light top or side per section, sample contents (clothes, linen) for scale
- 3/4, front and side views, dimension labels, reset; the near side wall drops away when it would hide the wardrobe
- Review with checks and an example parts list, enquiry text to copy and a PDF with closed and open views
Example configurator, fictional product. Sizes, rules, checks and the parts list are example values, not ratings.
Features:
Possible in your project
- Your product with your sizes, variants and rules
- Your pricing rules, languages and analytics events, set up per project
- Enquiries by e-mail or webhook to your sales team
- From photos, drawings or CAD data, if they are suitable (we check that before we start)
- Product images per variant from the same 3D model
- As its own page or embedded in your website or shop, with hosting and updates if you like
Not offered as standard: AR view in your room, an editor to maintain products yourself, PDF quotes and CPQ, and ERP integrations. We assess these case by case.
Request a configurator for my product